<
>
Specifications
Power(Watts):
1W
Resistance:
267kΩ
Voltage Rating:
200V
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
GR2512F267KT4G00
Package:
2512
Key Attributes
Model Number:
GR2512F267KT4G00
Product Description
Product Overview
The GiantOhm GR Series General Purpose Thick Film Chip Resistors are designed with advanced thick film technology, offering tiny and lightweight components with high reliability. These RoHS compliant resistors are suitable for both reflow and wave soldering and meet MSL Class 1 standards. They are ideal for a wide range of applications including home appliances, telecommunications, smart wearables, computers and peripherals, and instruments and meters.
Product Attributes
- Brand: GiantOhm
- Series: GR Series
- Technology: Thick Film
- Compliance: RoHS compliant
- Moisture Sensitivity Level (MSL): MSL 1
- Soldering Compatibility: Reflow and wave soldering
Technical Specifications
| Manufacturer Part No. Example | Series | Size | Tolerance | Nominal Resistance Value | Package | SPQ | Feature | TCR (PPM/) |
|---|---|---|---|---|---|---|---|---|
| GR1206J100KT5G00 | GR | 1206 | J (5%) | 100K | T/R | 5000 | General Purpose | See TCR details below |
Available Sizes and Codes
- Sizes: 0105, 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512
- Tolerance Codes: D (0.5%), F (1%), J (5%), 0R (Jumper < 50m)
- Nominal Resistance Value Codes: 1R (1), 4R7 (4.7), 4K7 (4.7K), 100K (100K), 4M7 (4.7M), 22M (22M)
- Package Code: T (T/R - Taping in Reel)
- SPQ Feature Codes: 4 (4K), 5 (5K), A (10K), B (15K), C (20K), D (50K), E (60K), G (Std.), S (P.C. - Personal and Customized)
- TCR Codes: 00 (Refer to item RELIABILITY)
Characteristics
| Series | Rated Power | Max. Working Voltage (MWV) | Max. Overload Voltage (MOV) | Dielectric Withstanding Voltage (DWV) | Max. Rated Current (MRC) | Max. Overload Current (MOC) | Resistance Value Range (0.5%) | Resistance Value Range (1%) | Resistance Value Range (5%) | Jumper Resistance |
|---|---|---|---|---|---|---|---|---|---|---|
| GR0105 | 1/32W | 15V | 30V | - | 0.5A | 1A | 10-10M | 1-10M | - | < 50m |
| GR0201 | 1/20W | 25V | 50V | - | 0.5A | 1A | 1-10M | 1-10M | - | < 50m |
| GR0402 | 1/16W | 50V | 100V | 100V | 1A | 2A | 1-10M | 1-22M | 1-22M | < 50m |
| GR0603 | 1/10W | 75V | 150V | 300V | 1A | 2A | 1-10M | 1-22M | 1-100M | < 50m |
| GR0805 | 1/8W | 150V | 300V | 500V | 2A | 5A | 1-10M | 1-22M | 1-100M | < 50m |
| GR1206 | 1/4W | 200V | 400V | 500V | 2A | 10A | 1-10M | 1-22M | 1-100M | < 50m |
| GR1210 | 1/2W | 200V | 500V | 500V | 2A | 10A | 1-10M | 1-22M | 1-100M | < 50m |
| GR1812 | 3/4W | 200V | 500V | 500V | 2A | 10A | 1-10M | 1-22M | 1-100M | < 50m |
| GR2010 | 3/4W | 200V | 500V | 500V | 2A | 10A | 1-10M | 1-22M | 1-100M | < 50m |
| GR2512 | 1W | 200V | 500V | 500V | 2A | 10A | 1-10M | 1-22M | 1-100M | < 50m |
Temperature Coefficient of Resistance (TCR)
| Series | TCR (PPM/) |
|---|---|
| GR0105 | 1R10: -200~+600; 10R100: 300; 100: 200 |
| GR0201 | 1R10: -100~+350; 10: 200 |
| GR0402~2512 | 1R10: 200; 10 R10M: 100; 10MR22M: 200; 22MR100M: 300 |
Dimensions (Unit: mm)
| Figure Type | L | W | H | A | B |
|---|---|---|---|---|---|
| 0105 | 0.400.02 | 0.200.02 | 0.130.02 | 0.100.03 | 0.100.03 |
| 0201 | 0.600.03 | 0.300.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.10 | 0.500.05 | 0.350.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.300.20 | 0.300.20 |
| 0805 | 2.000.15 | 1.250.15 | 0.550.10 | 0.400.20 | 0.400.20 |
| 1206 | 3.100.15 | 1.550.15 | 0.550.10 | 0.450.20 | 0.450.20 |
| 1210 | 3.100.10 | 2.600.20 | 0.550.10 | 0.500.25 | 0.500.20 |
| 1812 | 4.500.20 | 3.200.20 | 0.550.20 | 0.500.20 | 0.500.20 |
| 2010 | 5.000.10 | 2.500.20 | 0.550.10 | 0.600.25 | 0.500.20 |
| 2512 | 6.350.10 | 3.200.20 | 0.550.10 | 0.600.25 | 0.500.20 |
Reliability Test Summary
| Item | Test Method | Acceptable Criterion |
|---|---|---|
| Insulation Resistance | Parallel clamp method: 10015VDC applied between electrode and substrate for 60 seconds. | 109 |
| Dielectric Withstanding Voltage | AC voltage at max. overload voltage, maintained for 60 5 seconds. | Test to confirm if the presence of current or arc breakdown by 10uA |
| Short Time Over Load | 2.5 times rated voltage or max. overload voltage (whichever is smallest) for 5 seconds. | 1% series: R/R=(1.0%+0.05); 5% series: R/R=(2.0%+0.05); 0105: R/R=(2.0%+0.05); Jumper: < 50m |
| Intermittent Overload | Thermostat, 2.5 times rated voltage, 1 sec ON, 25 sec OFF, 100000 +400 cycles. | R/R=(5.0%+0.05); Jumper: < 50m |
| Resistance to Solvent | Immerse in isopropanol at room temperature for 5min, wipe 10 times with hard toothbrush, repeat 3 times. | No obvious damage, peeling, swelling phenomenon. |
| Solderability | Pretreatment: dry heat 155, 4H. Test B1: Dip in tin furnace at 2455 for 5 seconds. Method D: 2605, T=30+5/-0s. | 1. Solder coverage over 95%; 2. No more than 5% of the partially exposed substrate, non-wetted plating or ceramic substrate part. |
| Resistance to Soldering Heat | Reflow test: time above 217 C is 60s-150s, time above 250 5C is 305s. | R/R=(1.0%+0.05); Jumper: < 50m |
| Thermal Shock | Upper/lower limits of application temperature, 30min residence time, temp conversion < 30s, 500 cycles. | R/R=(1.0%+0.05); Jumper: < 50m |
| Solder Joint Endurance Test | SMD resistance welded to test board, bent with standard pressure block. | R/R=(1.0%+0.05); Jumper: < 50m |
| Resistance to Dry Heat | Oven at 1555 for 10000 +48hrs. | 1% series: R/R=(1.0%+0.05); 5% series: R/R=(3.0%+0.05); 0105: R/R=(3.0%+0.05); Jumper: < 50m |
| Loading Life in Moisture | Constant temp/humidity box (402, 90~96%RH), apply voltage for 1000 hrs. | 1% series: R/R=(1.0%+0.05); 5% series: R/R=(3.0%+0.05); 0105: R/R=(3.0%+0.05); Jumper: < 100m |
| Load Life | Oven at 702, apply rated voltage, 90 min ON, 30 min OFF, 1000 hrs. | 1% series: R/R=(1.0%+0.05); 5% series: R/R=(3.0%+0.05); 0105: R/R=(3.0%+0.05); Jumper: < 100m |
| Low temperature load test | -55, unpowered 1 hr.: Rated voltage/current for 45 minutes. | 1% series: R/R=(1.0%+0.05); 5% series: R/R=(2.0%+0.05); 0105: R/R=(2.0%+0.05); Jumper: < 50m |
| Shear force test | Apply test stress from the side of the part with the test terminal for 10s. | Without visible damage. |
Soldering Pad Dimensions (Unit: mm)
| Type | A | B | C |
|---|---|---|---|
| 0105 | 0.2 | 0.5 | 0.2 |
| 0201 | 0.3 | 1.0 | 0.4 |
| 0402 | 0.5 | 1.5 | 0.6 |
| 0603 | 0.8 | 2.1 | 0.9 |
| 0805 | 1.2 | 3.0 | 1.3 |
| 1206 | 2.2 | 4.2 | 1.6 |
| 1210 | 2.2 | 4.2 | 2.8 |
| 1812 | 3.1 | 5.9 | 3.0 |
| 2010 | 3.5 | 6.1 | 2.8 |
| 2512 | 3.8 | 8.0 | 3.5 |
Storage Conditions
- Temperature: 255
- Humidity: 6015%RH
- Storage life: 0105/0201 size: 1 year; 0402 size: 2 years. FIFO.
Taping Specifications (Unit: mm)
| Type or Size | A0.2 | B0.2 | C0.05 | D0 +0.1 | E0.1 | F0.05 | G0.1 | W0.2 | T0.1 |
|---|---|---|---|---|---|---|---|---|---|
| Carrier Taping A | |||||||||
| 0105 | 0.240.05 | 0.450.05 | 2.0 | 1.5 | 1.75 | 3.5 | 4.0 | 8.0 | 0.40 |
| 0201 | 0.400.05 | 0.700.05 | 2.0 | 1.5 | 1.75 | 3.5 | 4.0 | 8.0 | 0.47 |
| 0402 | 0.670.1 | 1.170.1 | 2.0 | 1.5 | 1.75 | 3.5 | 4.0 | 8.0 | 0.47 |
| Carrier Taping B | |||||||||
| 0603 | 1.10 | 1.90 | 2.0 | 1.5 | 1.75 | 3.5 | 4.0 | 8.0 | 0.67 |
| 0805 | 1.65 | 2.40 | 2.0 | 1.5 | 1.75 | 3.5 | 4.0 | 8.0 | 0.81 |
| 1206 | 1.90 | 3.45 | 2.0 | 1.5 | 1.75 | 3.5 | 4.0 | 8.0 | 0.81 |
| 1210 | 2.85 | 3.50 | 2.0 | 1.5 | 1.75 | 3.5 | 4.0 | 8.0 | 0.81 |
| Embossed Taping | |||||||||
| 2010 | 2.90 | 5.60 | 2.00 | 1.50 | 1.50 | 1.75 | 5.50 | 4.00 | 12.00 |
| 1812 | 3.50 | 4.80 | 2.00 | 1.50 | 1.50 | 1.75 | 5.50 | 4.00 | 12.00 |
| 2512 | 3.50 | 6.70 | 2.00 | 1.50 | 1.50 | 1.75 | 5.50 | 4.00 | 12.00 |
Reel Specifications (Unit: mm)
| Type | SPQ | PCS/Rl. | A0.5 | B0.5 | C0.5 | D1 | M2 | W1 |
|---|---|---|---|---|---|---|---|---|
| 0105 | 20,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 10.0 |
| 0201 | 15,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 10.0 |
| 0402 | 10,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 10.0 |
| 0603 | 5,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 10.0 |
| 0805 | 5,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 10.0 |
| 1206 | 5,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 10.0 |
| 1210 | 5,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 10.0 |
| 1812 | 4,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 13.8 |
| 2010 | 4,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 13.8 |
| 2512 | 4,000 | - | 2.0 | 13.0 | 21.0 | 60.0 | 178.0 | 13.8 |
Packing Box
- Packing Type: Taping in reel / Bulk in plastic bag.
- Inner box capacities: 1, 2, 3, 4, 5, and 10 reels.
- Out box capacities: 6- or 8-pieces inner box.
Note of Cover Tape Peel Off
- Peeling speed: under 300mm per minute.
- Angle between cover tape and unreeling direction: narrower than 10 degrees.
- Adhesive force limit: 0105, 0201: 6~30gf; 0402: 10~40gf; 0603 and above: 10~70gf.
2508041621_GiantOhm-GR2512F267KT4G00_C49656632.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
