<
>
Specifications
Voltage Rating:
50V
Tolerance:
±20%
Temperature Coefficient:
-
Power(Watts):
30mW
Number of Turns:
-
Resistance:
500Ω
Mfr. Part #:
RA1010H-1V-0814-B501-000
Package:
Through Hole
Key Attributes
Model Number:
RA1010H-1V-0814-B501-000
Product Description
Product Overview
Dong Guan PinZan Electronics Science and technology Co.,Ltd offers a 10mm ROTARY POTENTIOMETER, model RA1010H, designed for various electronic applications. This potentiometer features precise mechanical and electrical characteristics for reliable performance.
Product Attributes
- Brand: PinZan Electronics
- Origin: Dongguan, China
- Product Name: 10mm ROTARY POTENTIOMETER
- Part Name: RA1010H
Technical Specifications
| Item | Specifications | Description |
| 1. Environment | ||
| Operating temperature range | -10+70C | |
| Storage temperature range | -25+75C | |
| Test conditions | Standard atmospheric conditions: Ambient temperature: 535C, Relative humidity: 4585%, Air pressure: 8601060mbar. If doubt, use: Ambient temperature: 202C, Relative humidity: 6070%, Air pressure: 860 mbar to 1060 mbar. | () / () |
| 2. Mechanical characteristics | ||
| Total rotational angle | 27010 | |
| Rotational torque | 5~100gf.cm | |
| Rotational speed | 60/1 sec. | |
| Push and pull strength of knob | 0.5kgf static load for 3 sec. No abnormality in electric characteristics and operating feeling. | |
| Knob wobble | 0.6xL/30 mm p-p max. (L: Knob diameter) | |
| Shaft stopper strength | 0.6Kgf-cm max. | |
| 3. Electrical characteristics | ||
| Nominal total resistance | B50020% (Terminal 1-3) | |
| Resistance law (Taper) | Refer to Taper graph shown | |
| Insulation resistance | 100Mmin. at DC100 volts | |
| Dielectric strength | Apply AC100 V for 1 min. between individual terminals and case/shaft without damage. | |
| End resistance | 20max. (Terminal 1-2 and 2-3) | |
| Noise | 100mV max. | |
| Life (no load) | 5,000 cycles (1 cycle = CW270+CCW270, 6 sec/cycle) | |
| Maximum operating voltage | AC 50V | |
| Power rating | 0.03W | |
| Tracking error | -40db~0db4db | |
| 4. Common Specification of Lead-Free Soldering | ||
| Manual Soldering | Max 350C, within 3 seconds. | |
| Automated/Semi-Automated Soldering | Flux specific gravity 0.82. Preheating time 2 minutes, max preheating temp 100C. Solder dipping 260C, within 4 seconds. | |
| Shaft with Detent | Shaft should be settled in detent position prior to soldering. | |
| Dipping Count | Not more than 1 time. | |
| Reflow Soldering | Not recommended. | |
2410121458_G-Switch-RA1010H-1V-0814-B501-000_C22750563.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
