<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-55℃~+105℃
Capacitance:
100uF
Height - Seated (Max):
7.7mm
Voltage Rating:
50V
Diameter:
6.3mm
Ripple Current:
68mA@120Hz
Tolerance:
±20%
Mfr. Part #:
EEEFTH101XAP-FVM
Package:
SMD,D6.3xL7.7mm
Key Attributes
Model Number:
EEEFTH101XAP-FVM
Product Description
V-chip Aluminum Electrolytic Capacitors - FVM Series
This specification covers the FVM Series V-chip aluminum electrolytic capacitors, designed for various electronic applications. These capacitors offer reliable performance across a wide temperature and voltage range, adhering to international standards and environmental regulations.
Product Attributes
- Brand: Follon (JiangXi Follon Electronics Technology Co.,Ltd)
- Origin: China
- Product Series: FVM Series
- Certifications: Comply with EU directive 2002/95/EC (Environmental Protection Standard)
- Material: V-chip Aluminum Electrolytic Capacitors
Technical Specifications
| Parameter | Specification |
| Product Model | EEEFTH101XAP-FVM |
| Capacitance Range | 101500F |
| Voltage Range | DC: 6.3 50V |
| Operating Temperature Range | -55C +105C |
| Capacitance Tolerance | 20% at 120Hz, +20C |
| Leakage Current (After 2 min) | I 0.01 CV or 3 (A), whichever is greater |
| Loss Angle (Tan ) | Measurement frequency: 120Hz, Temperature: 20C |
| Low Temperature Characteristics (Impedance Ratio ZT/Z20) | See detailed table in source document for various voltages and sizes. |
| Surge Test | Cycles: 1000, C/C% 20%, DF Specification Value, LC Specified Value, Appearance OK, No Defects. Charging Voltage: WV(315V)*1.15 or WV(315V)*1.10. Charging Time: 30s. Discharge Time: 5min. |
| Load Life (at 105C) | 2000hrs. (45: 1000Hrs.) application of rated voltage. Requirements for Capacitance Change, Dissipation Factor, and Leakage Current specified. |
| Shelf Life (at 105C) | 1,000 hours without voltage. Preconditioning required per JIS C 5101-4. |
| Resistance to Soldering Heat (250C, 30s) | Capacitance Change: 10% of initial value. Dissipation Factor & Leakage Current: Specified value. |
| Marking | Manufacturers mark, Rated voltage and nominal capacitance, Negative polarity. |
| Dimensions (Example: 45.4) | D0.5, A0.2, B0.2, C0.2, P=1.0, L=5.4, W=0.5~0.8 |
| Taping Specifications | Applicable standard JIS C0806 and IEC 60286. See detailed figures and dimensions in source document. |
| Lead-Free Reflow Soldering Conditions | Recommended conditions for IR/hot blast reflow. Single reflow recommended. Specific preheating, soldering time, and peak temperature limits provided. |
| Frequency Coefficient of Allowable Ripple Current | See detailed table in source document for various sizes and frequencies. |
| Application Notes (Circuit Design) | Ensure operating conditions are within specified ranges. Capacitors are polar; avoid reverse/AC voltage. Use bi-polar for potential reversed polarity circuits. Not for pure AC circuits. Special capacitors for rapid charge/discharge. |
2411261515_FOLLON-EEEFTH101XAP-FVM_C41368829.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
