<
>
Specifications
Mfr. Part #:
EFVH035ADA470M0654-VT
Package:
SMD,D6.3xL5.4mm
Key Attributes
Model Number:
EFVH035ADA470M0654-VT
Product Description
Product Overview
This specification covers the "VT Series" V-chip aluminum electrolytic capacitors from JiangXi Follon Electronics Technology Co.,Ltd. These capacitors are designed for various electronic applications and comply with international and environmental standards.
Product Attributes
- Brand: V-chip
- Manufacturer: JiangXi Follon Electronics Technology Co.,Ltd
- Origin: China
- Certifications: Complies with EU directive 2002/95/EC, IEC 60384, JIS C-5101
Technical Specifications
| Parameter | Description |
| Scope | "VT Series" V-chip aluminum electrolytic capacitors |
| Reference Standard | IEC 60384, JIS C-5101 |
| Environmental Protection Standard | Comply with EU directive 2002/95/EC |
| Operating Temperature Range | 6.3V~100V: -55 +105 160V~400V: -40 +105 450V: -25 +105 |
| Voltage Range | DC: 4 450V |
| Capacitance Range | 0.16800F |
| Capacitance Tolerance | 20% at 120Hz, +20 |
| Leakage Current | (After 2 minutes of reading) 6.3120V 410: I 0.01 CV or 3 (A) whichever is greater 12.518: I 0.03 CV or 4 (A) whichever is greater (After 5 minutes of reading) 160450V 6.318: I 0.04 CV+100A Where, I=Leakage current (A), C=rated capacitance (F), V=rated DC working voltage (V) |
| Dissipation Factor (Tan ) | Measurement frequency: 120Hz, Temperature: 20 See detailed table in source document for values based on Rated Voltage and Diameter. |
| Stability at Low Temperature | Measurement frequency: 120Hz See detailed table in source document for Impedance Ratio (ZT/Z20) at -25 and -55 based on Rated Voltage and Diameter. |
| Surge Test | IEC 60384-4; Cycles: 1000; C/C% 20%; DFSpecification Value; Leakage CurrentSpecified Value; Appearance OK; Charging voltage: WV(315V)*1.15 or WV(315V)*1.10; Charging time: 30s; Discharge time: 5min |
| Load Life | 2000hrs at 105 with rated voltage. Capacitance Change: Within 20% of initial value (30% for 10V). Dissipation Factor: 200% of initial specified value. Leakage Current: Initial specified value. |
| Shelf Life | 1000 hours at 105 without voltage applied. Preconditioned according to JIS C 5101-4. |
| Resistance to Soldering Heat | 10 seconds at 250. Capacitance Change: Within 10% of initial value. Dissipation Factor: Initial specified value. Leakage Current: Initial specified value. |
| Marking | Manufacturers mark, Rated voltage and nominal capacitance, Negative polarity. |
| Dimensions | See detailed tables and diagrams in source document for various sizes (4 to 18) and corresponding dimensions (A, B, C, P, L, W, a, b). |
| Taping Specifications | Applicable standard JIS C0806 and IEC 60286. See detailed diagrams and tables in source document for cassette pattern size, reel dimensions, and packaging quantities. |
| Lead-free Reflow Soldering Condition | Recommended: IR or hot blast. One time reflow recommended; if twice, >60 min interval. Preheat (150~180): <120s. Soldering time (top temp >217): tL. Peak temperature: Tp, time within 5 of peak: tp. See detailed tables in source document for specific conditions (Tp, tL, tp) based on size and voltage. |
| Recommended Land Size | See detailed table in source document for X, Y, a dimensions based on capacitor size (4 to 18). |
| Raw Materials of Lead Wire | TPCS: Fe 71.35%, Cu 20%, Sn 8.65% |
2512241555_FOLLON-EFVH035ADA470M0654-VT_C53206937.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
