FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is designed for a wide range of applications in consumer electronics, appliances, computers, communication equipment, power supplies, and measuring instruments. These resistors are characterized by their small size, light weight, high reliability, and superior quality.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Conductive layer (Silver), Resistive layer (RuO2+ glass), Outer Protective layer (Epoxy)
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) |
|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10, 10~10M | 400 (1~10), 200 (10~10M) | 0.600.03 x 0.300.03 x 0.230.03 mm |
| 0402 | 1/16W | 50V | 100V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 1.000.05 x 0.500.05 x 0.350.05 mm |
| 0603 | 1/10W | 75V | 150V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 1.600.10 x 0.800.10 x 0.450.10 mm |
| 0805 | 1/8W | 150V | 300V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 2.000.10 x 1.250.10 x 0.500.10 mm |
| 1206 | 1/4W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 3.100.10 x 1.600.10 x 0.550.10 mm |
| 1210 | 1/2W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 3.100.10 x 2.500.15 x 0.550.10 mm |
| 1218 | 1W | 200V | 500V | 1~10, 10~1M | 200 (1~10), 100 (10~1M) | 3.100.10 x 4.600.10 x 0.550.10 mm |
| 1812 | 3/4W | 200V | 400V | 1~10, 10~10M | 200 (1~10), 100 (10~10M) | 4.500.20 x 3.100.20 x 0.550.10 mm |
| 2010 | 3/4W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 5.000.10 x 2.500.15 x 0.550.10 mm |
| 2512 | 1W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 6.350.10 x 3.100.15 x 0.550.10 mm |
Performance Specifications
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=R-R0/t-t0R0 10ppm R0: resistance at room temperature R: resistance at 125 or -55 t0: room temperature t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown, visible mechanical damage |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm (1206), 2+0.2/0 mm (>1206). Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber: T1: -553; T2: 1553 / 1253, 30min, repeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Constant temperature and humidity chamber: 402, 90~95 %RH; Applied rated voltage for 1.5 hours, power off for 0.5 hours; Repeat power on/off for 1000 +48/-0 hours. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
Application Scenarios
- Entertainment: Stereo, TV tuners, Tape recorders
- Appliances: Air conditioners, Refrigerators
- Computers & Relative Products: Main boards, PDAs
- Communication Equipment: Cell phones, Fax machines
- Power Equipment: Power supplies, Illumination equipment
- Measuring Instruments: Electric meters, Navigation equipment
Features
- Small size and light weight
- Reliability, high quality
Parts Number Explanation (Example: FRC1206P000 TS)
FRC: Company Name (FOJAN)
1206: Size Code
P: Tolerance Code
000: Resistance Code
T: Packaging Code
S: Termination Code
Special Case: Special Code
Marking on the Resistor's Body
0201 & 0402 sizes: No marking on the body due to small size.
5% tolerance: 3-digit code (e.g., 102 = 1K, 1R0 = 1). First two digits are significant figures, third digit is the power of 10.
0.5%, 1%, 2% tolerance: 4-digit code (e.g., 1001 = 1K, 1R00 = 1). First three digits are significant figures, fourth digit is the power of 10.
0603 1% E96 Series: 3-digit code due to small body size.
Zero Ohm (Jumper) products: 1-digit code '0'.
Resistance below 10: Indicated with 'R' (e.g., 5R6 = 5.6).
Resistance below 100: Indicated with 'R' (e.g., 6R81 = 6.81).
Multiplier Code (for 0603 1% Marking)
Examples: 10D=12410=124K, 38Y=24310=2.43, 331=3310=330, 560=5610=56.
0603 1% (Standard E24, not E96): Marked same as 5% tolerance, but with an underline.
2510101005_FOJAN-FRC0603F10R0TS_C2906983.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
