<
>
Specifications
Resistance:
10kΩ
Power(Watts):
250mW
Voltage Rating:
200V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±5%
Mfr. Part #:
FRC1206J103 TS
Package:
1206
Key Attributes
Model Number:
FRC1206J103 TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a compact and reliable component designed for a wide range of electronic applications. It offers high quality and is suitable for use in entertainment systems, appliances, computers, communication equipment, power supplies, and measuring instruments. Key features include small size, light weight, and dependable performance.
Product Attributes
- Brand: FOJAN
- Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Silver electrodes, Nickel-Chrome alloy, Ruthenium Oxide + Glass resistive layer, Epoxy protective layer.
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) |
|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10 ± 400 10~10M ± 200 | ± 400 / ± 200 |
| 0402 | 1/16W | 50V | 100V | 1~10 ± 200 10~10M ± 100 10M~22M ± 200 | ± 200 / ± 100 |
| 0603 | 1/10W | 75V | 150V | 1~10 ± 200 10~10M ± 100 10M~22M ± 200 | ± 200 / ± 100 |
| 0805 | 1/8W | 150V | 300V | 1~10 ± 200 10~10M ± 100 10M~22M ± 200 | ± 200 / ± 100 |
| 1206 | 1/4W | 200V | 400V | 1~10 ± 200 10~10M ± 100 10M~22M ± 200 | ± 200 / ± 100 |
| 1210 | 1/2W | 200V | 400V | 1~10 ± 200 10~10M ± 100 10M~22M ± 200 | ± 200 / ± 100 |
| 1218 | 1W | 200V | 500V | 1~10 ± 200 10~1M ± 100 | ± 200 / ± 100 |
| 1812 | 3/4W | 200V | 400V | 1~10 ± 200 10~10M ± 100 | ± 200 / ± 100 |
| 2010 | 3/4W | 200V | 400V | 1~10 ± 200 10~10M ± 100 10M~22M ± 200 | ± 200 / ± 100 |
| 2512 | 1W | 200V | 400V | 1~10 ± 200 10~10M ± 100 10M~22M ± 200 | ± 200 / ± 100 |
Dimensions
| Type | L (mm) | W (mm) | H (mm) | T1 (mm) | T2 (mm) |
|---|---|---|---|---|---|
| 0201 | 0.60±0.03 | 0.30±0.03 | 0.23±0.03 | 0.10±0.05 | 0.15±0.05 |
| 0402 | 1.00±0.05 | 0.50±0.05 | 0.35±0.05 | 0.20±0.10 | 0.25±0.10 |
| 0603 | 1.60±0.10 | 0.80±0.10 | 0.45±0.10 | 0.25±0.15 | 0.25±0.15 |
| 0805 | 2.00±0.10 | 1.25±0.10 | 0.50±0.10 | 0.35±0.20 | 0.40±0.20 |
| 1206 | 3.10±0.10 | 1.60±0.10 | 0.55±0.10 | 0.45±0.20 | 0.45±0.20 |
| 1210 | 3.10±0.10 | 2.50±0.15 | 0.55±0.10 | 0.45±0.15 | 0.50±0.20 |
| 1218 | 3.10±0.10 | 4.60±0.10 | 0.55±0.10 | 0.45±0.20 | 0.40±0.20 |
| 1812 | 4.50±0.20 | 3.10±0.20 | 0.55±0.10 | 0.55±0.20 | 0.70±0.20 |
| 2010 | 5.00±0.10 | 2.50±0.15 | 0.55±0.10 | 0.45±0.15 | 0.50±0.20 |
| 2512 | 6.35±0.10 | 3.10±0.15 | 0.55±0.10 | 0.60±0.20 | 0.90±0.20 |
Performance Specifications
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=(R-R0)/(t-t0)R0×106(ppm) R0: resistance at room temperature, R: resistance at 125 or -55, t0: room temperature, t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance before and after test. | 0.5%, 1%: ±(1.0%+0.05) 5%: ±(2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 245±5 for 3±0.5sec. | >95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 260±5 for 10 ±0.5sec. Measure the variation of resistance before and after test. | ±(1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 60±5 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 60±5 seconds. | No evidence of flashover, arcing or insulation breakdown, mechanical damage |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 20±1s. Bending distance: 5+0.2/0 mm for size ≤1206, 2+0.2/0 mm for size >1206. Measure the variation of resistance before and after test. | ±(1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber: T1: -55±3; T2: 155±3/125±3, 30min each. Repeated 300 cycles. Measure the variation of resistance before and after test. | 0.5%, 1%: ±(1.0%+0.05) 5%: ±(2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Put specimen in constant temperature and humidity chamber: 40±2, 90~95 %RH. Apply rated voltage for 1.5 hours, then power off for 0.5 hours. Repeat ON/OFF cycle for 1000 +48/-0 hours. Measure the variation of resistance before and after test. | (Data truncated in source) |
2510101005_FOJAN-FRC1206J103-TS_C2907423.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
