<
>
Specifications
Power(Watts):
250mW
Resistance:
1.5kΩ
Voltage Rating:
200V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±5%
Mfr. Part #:
FRC1206J152 TS
Package:
1206
Key Attributes
Model Number:
FRC1206J152 TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a high-quality, small-sized, and lightweight component designed for a wide range of electronic applications. It offers reliability and performance suitable for entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Silver electrodes, Nickel-chrome alloy, Ruthenium oxide + glass resistive layer, Epoxy outer protective layer.
- Origin: China (implied by www.fojan.cn and Chinese text)
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) mm | Rated Current (Jumper) | Max Current (Jumper) |
|---|---|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10 (400 PPM/) 10~10M (200 PPM/) | 400 / 200 | 0.600.03 x 0.300.03 x 0.230.03 | 0.5A | 1A |
| 0402 | 1/16W | 50V | 100V | 1~10 (200 PPM/) 10~22M (100 PPM/) | 200 / 100 | 1.000.05 x 0.500.05 x 0.350.05 | 1A | 2A |
| 0603 | 1/10W | 75V | 150V | 1~10 (200 PPM/) 10~22M (100 PPM/) | 200 / 100 | 1.600.10 x 0.800.10 x 0.450.10 | 1A | 2A |
| 0805 | 1/8W | 150V | 300V | 1~10 (200 PPM/) 10~22M (100 PPM/) | 200 / 100 | 2.000.10 x 1.250.10 x 0.500.10 | 2A | 5A |
| 1206 | 1/4W | 200V | 400V | 1~10 (200 PPM/) 10~22M (100 PPM/) | 200 / 100 | 3.100.10 x 1.600.10 x 0.550.10 | 2A | 10A |
| 1210 | 1/2W | 200V | 400V | 1~10 (200 PPM/) 10~22M (100 PPM/) | 200 / 100 | 3.100.10 x 2.500.15 x 0.550.10 | 2A | 10A |
| 1218 | 1W | 200V | 500V | 1~10 (200 PPM/) 10~1M (100 PPM/) | 200 / 100 | 3.100.10 x 4.600.10 x 0.550.10 | 6A | 10A |
| 1812 | 3/4W | 200V | 400V | 1~10 (200 PPM/) 10~10M (100 PPM/) | 200 / 100 | 4.500.20 x 3.100.20 x 0.550.10 | 2A | 10A |
| 2010 | 3/4W | 200V | 400V | 1~10 (200 PPM/) 10~22M (100 PPM/) | 200 / 100 | 5.000.10 x 2.500.15 x 0.550.10 | 2A | 10A |
| 2512 | 1W | 200V | 400V | 1~10 (200 PPM/) 10~22M (100 PPM/) | 200 / 100 | 6.350.10 x 3.100.15 x 0.550.10 | 2A | 10A |
Performance Specifications
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR calculation using resistance at room temp, 125/-55 | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | 2.5 times rated voltage for 5 seconds | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip in flux, then solder bath at 2455 for 30.5 sec | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip in flux, then solder bath at 2605 for 100.5 sec | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied dielectric withstanding voltage for 605 sec | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied dielectric withstanding voltage for 605 sec | No flashover, arcing or mechanical damage |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Bend test on mounted specimen | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | 300 cycles (-553 to 1553/1253) | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | 402, 90~95 %RH for 1000 hours | (Data truncated in source) |
2510101005_FOJAN-FRC1206J152-TS_C2907413.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
