<
>
Specifications
Power(Watts):
250mW
Resistance:
2.2kΩ
Voltage Rating:
200V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±5%
Mfr. Part #:
FRC1206J222 TS
Package:
1206
Key Attributes
Model Number:
FRC1206J222 TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a reliable, high-quality component designed for a wide range of electronic applications. Its small size and light weight make it ideal for space-constrained designs. This resistor is suitable for use in entertainment systems, appliances, computers, communication equipment, power supplies, and measuring instruments.
Product Attributes
- Brand: Fojan
- Product Type: Thick Film Chip Resistor
- Series: FRC-Series
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) mm |
| 0201 | 1/20W | 25V | 50V | 1~10 ±200; 10~10M ±400 | ±400 / ±200 | 0.60 ±0.03 x 0.30 ±0.03 x 0.23 ±0.03 |
| 0402 | 1/16W | 50V | 100V | 1~10 ±200; 10M~22M ±100; 10~10M ±200 | ±200 / ±100 | 1.00 ±0.05 x 0.50 ±0.05 x 0.35 ±0.05 |
| 0603 | 1/10W | 75V | 150V | 1~10 ±200; 10M~22M ±100; 10~10M ±200 | ±200 / ±100 | 1.60 ±0.10 x 0.80 ±0.10 x 0.45 ±0.10 |
| 0805 | 1/8W | 150V | 300V | 1~10 ±200; 10M~22M ±100; 10~10M ±200 | ±200 / ±100 | 2.00 ±0.10 x 1.25 ±0.10 x 0.50 ±0.10 |
| 1206 | 1/4W | 200V | 400V | 1~10 ±200; 10M~22M ±100; 10~10M ±200 | ±200 / ±100 | 3.10 ±0.10 x 1.60 ±0.10 x 0.55 ±0.10 |
| 1210 | 1/2W | 200V | 400V | 1~10 ±200; 10M~22M ±100; 10~10M ±200 | ±200 / ±100 | 3.10 ±0.10 x 2.50 ±0.15 x 0.55 ±0.10 |
| 1218 | 1W | 200V | 500V | 1~10 ±200; 10~1M ±100 | ±200 / ±100 | 3.10 ±0.10 x 4.60 ±0.10 x 0.55 ±0.10 |
| 1812 | 3/4W | 200V | 400V | 1~10 ±200; 10~10M ±100 | ±200 / ±100 | 4.50 ±0.20 x 3.10 ±0.20 x 0.55 ±0.10 |
| 2010 | 3/4W | 200V | 400V | 1~10 ±200; 10M~22M ±100; 10~10M ±200 | ±200 / ±100 | 5.00 ±0.10 x 2.50 ±0.15 x 0.55 ±0.10 |
| 2512 | 1W | 200V | 400V | 1~10 ±200; 10M~22M ±100; 10~10M ±200 | ±200 / ±100 | 6.35 ±0.10 x 3.10 ±0.15 x 0.55 ±0.10 |
Performance Specifications
| Item | Test Methods | Test Conditions | Specification |
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=R-R0 /t-t0R0 106ppm R0: resistance at room temperature, R: resistance at 125 or -55, t0: room temperature, t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance. | 0.5%, 1%: ±(1.0%+0.05); 5%: ±(2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 245±5 for 3±0.5sec. | >95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 260±5 for 10 ±0.5sec. Measure the variation of resistance. | ±(1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 60±5seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 60±5seconds. | No evidence of flashover, arcing or insulation breakdown |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 20±1s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance. | ±(1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber which temperature can be T1-55±3T2 155±3/125±3, 30minrepeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: ±(1.0%+0.05); 5%: ±(2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Put resistor in a constant temperature and humidity chamber, temperature 40±2, humidity 90~95 %RH; apply rated voltage for 1.5 hours, power off for 0.5 hours; repeat power on/off until test time is 1000 +48/-0 hours. Measure the variation of resistance. |
2510101005_FOJAN-FRC1206J222-TS_C2907443.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
