FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a compact and lightweight component designed for high reliability and quality. It is suitable for a wide range of applications including entertainment systems, appliances, computers, communication equipment, power supplies, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Material: Thick Film
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Type | L (mm) | W (mm) | H (mm) | T1 (mm) | T2 (mm) | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | T.C.R. (PPM/) | Resistance Range |
|---|---|---|---|---|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.300.03 | 0.230.03 | 0.100.05 | 0.150.05 | 1/20W | 25V | 50V | 400 (1~10), 200 (10~10M) | 1~10M |
| 0402 | 1.000.05 | 0.500.05 | 0.350.05 | 0.200.10 | 0.250.10 | 1/16W | 50V | 100V | 200 (1~10), 100 (10~10M) | 1~22M |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.250.15 | 0.250.15 | 1/10W | 75V | 150V | 200 (1~10), 100 (10~10M) | 1~22M |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.400.20 | 1/8W | 150V | 300V | 200 (1~10), 100 (10~10M) | 1~22M |
| 1206 | 3.100.10 | 1.600.10 | 0.550.10 | 0.450.20 | 0.450.20 | 1/4W | 200V | 400V | 200 (1~10), 100 (10~10M) | 1~22M |
| 1210 | 3.100.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 | 1/2W | 200V | 400V | 200 (1~10), 100 (10~10M) | 1~22M |
| 1218 | 3.100.10 | 4.600.10 | 0.550.10 | 0.450.20 | 0.400.20 | 1W | 200V | 500V | 200 (1~10), 100 (10~1M) | 1~1M |
| 1812 | 4.500.20 | 3.100.20 | 0.550.10 | 0.550.20 | 0.700.20 | 3/4W | 200V | 400V | 200 (1~10), 100 (10~10M) | 1~10M |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 | 3/4W | 200V | 400V | 200 (1~10), 100 (10~10M) | 1~22M |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.900.20 | 1W | 200V | 400V | 200 (1~10), 100 (10~10M) | 1~22M |
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=R-R0 /t-t0R0 106ppm R0: resistance at room temperature, R: resistance at 125 or -55, t0: room temperature, t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 100.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown, mechanical damage |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm (1206 size), 2+0.2/0 mm (>1206 size). Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber: T1: -553; T2: 1553/1253, 30min, repeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Constant temperature and humidity chamber: 402, 90~95%RH; Applied rated voltage for 1.5 hours, power off for 0.5 hours; Repeat power on/off for 1000+48/-0 hours. Measure the variation of resistance. | (Data truncated in source) |
Application Scenarios: Entertainment (Stereo, TV tuners, Tape recorder), Appliance (Air conditioner, Refrigerator), Computer & relative products (Main board, PDA), Communication equipment (Cell phone, Fax machine), Power equipment (Power supply, Illumination equipment), Measuring instrument (Electric meter, Navigation equipment).
Features: Small size and light weight, Reliability, high quality.
Part Number Explanation Example: FRC1206P000TS
Marking on the Resistor's Body: Details on E96 series resistance value code for 0603 1% and other marking conventions are provided, including special handling for 0201/0402 sizes, 5% tolerance, 0.5%/1%/2% tolerance, and Jumper products.
Multiplier Code for 0603 1% Marking: Explains multiplier codes and specific marking for E24 series values not in E96 series.
Resistance Structure: Ceramic substrate (Al2O3), Silver electrode (Ag), Nickel-chromium alloy (NiCr), Ruthenium oxide + glass (RuO2+ glass), Glass, Epoxy resin, Ink, Nickel plating (Ni), Matte Tin plating (Sn).
Derating Curve: (Visual representation of power derating not included in text data)
Rated Voltage Calculation: E = sqrt(P*R) or Maximum Working Voltage of the type, whichever is lower.
2510101005_FOJAN-FRC0805F1502TS_C2930170.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
