<
>
Specifications
Power(Watts):
62.5mW
Resistance:
330Ω
Voltage Rating:
50V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
FRC0402F3300TS
Package:
0402
Key Attributes
Model Number:
FRC0402F3300TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a reliable, high-quality component designed for various electronic applications. Its small size and light weight make it ideal for compact designs. This series offers a wide range of resistance values and electrical characteristics suitable for entertainment, appliances, computer products, communication equipment, power equipment, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Outer Protective layer (Epoxy)
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage | Max Overload Voltage | Resistance Range | T.C.R. (PPM/) |
|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10 10~10M | 400 200 |
| 0402 | 1/16W | 50V | 100V | 1~10 10~10M 10M~22M | 200 100 |
| 0603 | 1/10W | 75V | 150V | 1~10 10~10M 10M~22M | 200 100 |
| 0805 | 1/8W | 150V | 300V | 1~10 10~10M 10M~22M | 200 100 |
| 1206 | 1/4W | 200V | 400V | 1~10 10~10M 10M~22M | 200 100 |
| 1210 | 1/2W | 200V | 400V | 1~10 10~10M 10M~22M | 200 100 |
| 1218 | 1W | 200V | 500V | 1~10 10~1M | 200 100 |
| 1812 | 3/4W | 200V | 400V | 1~10 10~10M | 200 100 |
| 2010 | 3/4W | 200V | 400V | 1~10 10~10M 10M~22M | 200 100 |
| 2512 | 1W | 200V | 400V | 1~10 10~10M 10M~22M | 200 100 |
Dimensions
| Type | L (mm) | W (mm) | H (mm) | T1 (mm) | T2 (mm) |
|---|---|---|---|---|---|
| 0201 | 0.600.03 | 0.300.03 | 0.230.03 | 0.100.05 | 0.150.05 |
| 0402 | 1.000.05 | 0.500.05 | 0.350.05 | 0.200.10 | 0.250.10 |
| 0603 | 1.600.10 | 0.800.10 | 0.450.10 | 0.250.15 | 0.250.15 |
| 0805 | 2.000.10 | 1.250.10 | 0.500.10 | 0.350.20 | 0.400.20 |
| 1206 | 3.100.10 | 1.600.10 | 0.550.10 | 0.450.20 | 0.450.20 |
| 1210 | 3.100.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 |
| 1218 | 3.100.10 | 4.600.10 | 0.550.10 | 0.450.20 | 0.400.20 |
| 1812 | 4.500.20 | 3.100.20 | 0.550.10 | 0.550.20 | 0.700.20 |
| 2010 | 5.000.10 | 2.500.15 | 0.550.10 | 0.450.15 | 0.500.20 |
| 2512 | 6.350.10 | 3.100.15 | 0.550.10 | 0.600.20 | 0.900.20 |
Performance Specifications
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=R-R0 /t-t0R0 106ppm R0: resistance at room temperature, R: resistance at 125or -55, t0: room temperature, t: test temperature 125or -55 | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 second. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605seconds. | No evidence of flashover, arcing or insulation breakdown |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber which temperature can be T1-553T2 1553/1253, 30minrepeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Put specimen in a constant temperature and humidity chamber, temperature 402, humidity 90~95 %RH; apply rated voltage for 1.5 hours, then power off for 0.5 hours; repeat power on/off until the test time is 1000 +48/-0 hours. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
2510101005_FOJAN-FRC0402F3300TS_C2930002.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
