<
>
Specifications
Resistance:
47kΩ
Power(Watts):
125mW
Voltage Rating:
150V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
FRC0805F4702TS
Package:
0805
Key Attributes
Model Number:
FRC0805F4702TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a compact and lightweight component designed for high reliability and quality. It is suitable for a wide range of applications including entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Silver, Nickel Chrome Alloy, Ruthenium Oxide + Glass, Epoxy, Tin
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) |
|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10 10~10M | 400 200 |
| 0402 | 1/16W | 50V | 100V | 1~10 10~22M | 200 100 |
| 0603 | 1/10W | 75V | 150V | 1~10 10~22M | 200 100 |
| 0805 | 1/8W | 150V | 300V | 1~10 10~22M | 200 100 |
| 1206 | 1/4W | 200V | 400V | 1~10 10~22M | 200 100 |
| 1210 | 1/2W | 200V | 400V | 1~10 10~22M | 200 100 |
| 1218 | 1W | 200V | 500V | 1~10 10~1M | 200 100 |
| 1812 | 3/4W | 200V | 400V | 1~10 10~10M | 200 100 |
| 2010 | 3/4W | 200V | 400V | 1~10 10~22M | 200 100 |
| 2512 | 1W | 200V | 400V | 1~10 10~22M | 200 100 |
| Type | Rated Power | Max Working Voltage | Max Overload Voltage | Dielectric Withstanding Voltage | Jumper Resistance Value 1% | Jumper Resistance Value 5% | Jumper Rated Current | Jumper Max Current |
|---|---|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | - | - | - | 0.5A | 1A |
| 0402 | 1/16W | 50V | 100V | 100V | <30m | <50m | 1A | 2A |
| 0603 | 1/10W | 75V | 150V | 100V | <30m | <50m | 1A | 2A |
| 0805 | 1/8W | 150V | 300V | 300V | <30m | <50m | 2A | 5A |
| 1206 | 1/4W | 200V | 400V | 500V | <30m | <50m | 2A | 10A |
| 1210 | 1/2W | 200V | 400V | 500V | <30m | <50m | 2A | 10A |
| 1218 | 1W | 200V | 500V | 500V | <30m | <50m | 6A | 10A |
| 1812 | 3/4W | 200V | 400V | 500V | <30m | <50m | 2A | 10A |
| 2010 | 3/4W | 200V | 400V | 500V | <30m | <50m | 2A | 10A |
| 2512 | 1W | 200V | 400V | 500V | <30m | <50m | 2A | 10A |
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Short-time overload | JIS C 5201 4.13 IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 second. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | >95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 60 5seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 60 5seconds. | No evidence of flashover, arcing or insulation breakdown |
| Terminal bending | JIS C 5201 4.33 IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 20 1s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 IEC60115-1-4.19 | Put specimen in a chamber which temperature can be T1-553T2 1553/1253, 30minrepeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
2510101005_FOJAN-FRC0805F4702TS_C2930202.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
