<
>
Specifications
Power(Watts):
125mW
Resistance:
3.3kΩ
Voltage Rating:
150V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
FRC0805F3301TS
Package:
0805
Key Attributes
Model Number:
FRC0805F3301TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a high-quality, reliable component designed for a wide range of electronic applications. Its small size and light weight make it ideal for compact designs in entertainment systems, appliances, computers, communication equipment, power supplies, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Inner protective layer (Glass), Outer Protective layer (Epoxy), Marking (Epoxy), Ni plating layer (Ni), Sn plating layer (Matte Tin)
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) |
|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10, 10~10M | 400 (1~10), 200 (10~10M) | 0.600.03 x 0.300.03 x 0.230.03 mm |
| 0402 | 1/16W | 50V | 100V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 1.000.05 x 0.500.05 x 0.350.05 mm |
| 0603 | 1/10W | 75V | 150V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 1.600.10 x 0.800.10 x 0.450.10 mm |
| 0805 | 1/8W | 150V | 300V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 2.000.10 x 1.250.10 x 0.500.10 mm |
| 1206 | 1/4W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 3.100.10 x 1.600.10 x 0.550.10 mm |
| 1210 | 1/2W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 3.100.10 x 2.500.15 x 0.550.10 mm |
| 1218 | 1W | 200V | 500V | 1~10, 10~1M | 200 (1~10), 100 (10~1M) | 3.100.10 x 4.600.10 x 0.550.10 mm |
| 1812 | 3/4W | 200V | 400V | 1~10, 10~10M | 200 (1~10), 100 (10~10M) | 4.500.20 x 3.100.20 x 0.550.10 mm |
| 2010 | 3/4W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 5.000.10 x 2.500.15 x 0.550.10 mm |
| 2512 | 1W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) | 6.350.10 x 3.100.15 x 0.550.10 mm |
Performance Specifications
| Item | Test Method | Test Condition | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=(R-R0)/(t-t0)R0 10(ppm) R0: resistance at room temperature R: resistance at 125 or -55 t0: room temperature t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 second. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605seconds. | No evidence of flashover, arcing or insulation breakdown |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber which temperature can be T1-553T2 1553/1253, 30minrepeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Put resistor in a constant temperature and humidity chamber, temperature 402, humidity 90~95 %RH; apply rated voltage for 1.5 hours, then power off for 0.5 hours; repeat power on/off until test time reaches 1000 +48/-0 hours. Measure the variation of resistance. | (Specification not fully provided) |
2510101005_FOJAN-FRC0805F3301TS_C2907249.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
