<
>
Specifications
Power(Watts):
250mW
Resistance:
330Ω
Voltage Rating:
200V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
FRC1206F3300TS
Package:
1206
Key Attributes
Model Number:
FRC1206F3300TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a reliable and high-quality component designed for a wide range of electronic applications. Its small size and light weight make it ideal for space-constrained designs. This resistor is suitable for use in entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Outer Protective layer (Epoxy), Plating (Ni/Sn)
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) mm |
|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10 (400), 10~10M (200) | 400 / 200 | 0.600.03 x 0.300.03 x 0.230.03 |
| 0402 | 1/16W | 50V | 100V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 1.000.05 x 0.500.05 x 0.350.05 |
| 0603 | 1/10W | 75V | 150V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 1.600.10 x 0.800.10 x 0.450.10 |
| 0805 | 1/8W | 150V | 300V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 2.000.10 x 1.250.10 x 0.500.10 |
| 1206 | 1/4W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 3.100.10 x 1.600.10 x 0.550.10 |
| 1210 | 1/2W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 3.100.10 x 2.500.15 x 0.550.10 |
| 1218 | 1W | 200V | 500V | 1~10 (200), 10~1M (100) | 200 / 100 | 3.100.10 x 4.600.10 x 0.550.10 |
| 1812 | 3/4W | 200V | 400V | 1~10 (200), 10~10M (100) | 200 / 100 | 4.500.20 x 3.100.20 x 0.550.10 |
| 2010 | 3/4W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 5.000.10 x 2.500.15 x 0.550.10 |
| 2512 | 1W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 6.350.10 x 3.100.15 x 0.550.10 |
Performance Specifications
| Item | Test Method | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=(R-R0)/(t-t0)R0 106(ppm) R0:resistance at room temperature, R:resistance at 125or -55, t0:room temperature, t:test temperature (125or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 100.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm (size 1206) or 2+0.2/0 mm (size >1206). Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber with T1: -553; T2: 1553/1253, 30min, repeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Put specimen in a constant temperature and humidity chamber, temperature 402, humidity 90~95%RH; apply rated voltage for 1.5 hours, then power off for 0.5 hours; repeat power on/off for a total test time of 1000 +48/-0 hours. Measure the variation of resistance. |
2510101005_FOJAN-FRC1206F3300TS_C2933675.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
