<
>
Specifications
Resistance:
4.7kΩ
Power(Watts):
100mW
Voltage Rating:
75V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
FRC0603F4701TS
Package:
0603
Key Attributes
Model Number:
FRC0603F4701TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a reliable and high-quality electronic component designed for a wide range of applications. Its small size and light weight make it ideal for compact electronic devices. This resistor is suitable for use in entertainment systems, appliances, computers, communication equipment, power supplies, illumination, and measuring instruments.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
- Material: Ceramic substrate (Al2O3), Conductive layer (Ag), Resistive layer (RuO2+ glass), Outer Protective layer (Epoxy), Plating (Ni/Sn)
Technical Specifications
| Type | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) | Dimensions (L x W x H) |
|---|---|---|---|---|---|---|
| 0201 | 1/20W | 25V | 50V | 1~10 (400), 10~10M (200) | 400 / 200 | 0.600.03 x 0.300.03 x 0.230.03 mm |
| 0402 | 1/16W | 50V | 100V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 1.000.05 x 0.500.05 x 0.350.05 mm |
| 0603 | 1/10W | 75V | 150V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 1.600.10 x 0.800.10 x 0.450.10 mm |
| 0805 | 1/8W | 150V | 300V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 2.000.10 x 1.250.10 x 0.500.10 mm |
| 1206 | 1/4W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 3.100.10 x 1.600.10 x 0.550.10 mm |
| 1210 | 1/2W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 3.100.10 x 2.500.15 x 0.550.10 mm |
| 1218 | 1W | 200V | 500V | 1~10 (200), 10~1M (100) | 200 / 100 | 3.100.10 x 4.600.10 x 0.550.10 mm |
| 1812 | 3/4W | 200V | 400V | 1~10 (200), 10~10M (100) | 200 / 100 | 4.500.20 x 3.100.20 x 0.550.10 mm |
| 2010 | 3/4W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 5.000.10 x 2.500.15 x 0.550.10 mm |
| 2512 | 1W | 200V | 400V | 1~10 (200), 10~10M (100), 10M~22M (200) | 200 / 100 | 6.350.10 x 3.100.15 x 0.550.10 mm |
Performance Specifications
| Item | Test Methods | Test Conditions | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=R-R0/t-t0R0 10ppm R0: resistance at room temperature, R: resistance at 125 or -55, t0: room temperature, t: test temperature (125 or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 seconds. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown, mechanical damage |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. Bending distance: 5+0.2/0 mm (1206 size), 2+0.2/0 mm (>1206 size). Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber with temperature cycles: T1: -553; T2: 1553/1253, 30min per cycle, 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05), 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Place specimen in a constant temperature and humidity chamber (402, 90~95 %RH). Apply rated voltage for 1.5 hours, then power off for 0.5 hours. Repeat power on/off for 1000 +48/-0 hours. Measure the variation of resistance. | As SPEC |
2510101005_FOJAN-FRC0603F4701TS_C2907034.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
