<
>
Specifications
Resistance:
10kΩ
Power(Watts):
100mW
Voltage Rating:
75V
Temperature Coefficient:
±100ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
FRC0603F1002TS
Package:
0603
Key Attributes
Model Number:
FRC0603F1002TS
Product Description
FRC-Series Thick Film Chip Resistor
The FRC-Series Thick Film Chip Resistor is a compact and lightweight component designed for reliability and high quality. It finds extensive application in various electronic devices and systems.
Product Attributes
- Brand: FOJAN
- Product Type: Thick Film Chip Resistor
Application Scenarios
- Entertainment: Stereo, TV tuners, Tape recorders
- Appliances: Air conditioners, Refrigerators
- Computers & Related Products: Main boards, PDAs
- Communication Equipment: Cell phones, Fax machines
- Power Equipment: Power supplies, Illumination equipment
- Measuring Instruments: Electric meters, Navigation equipment
Technical Specifications
| Type | Dimensions (L x W x H) (mm) | Rated Power (at 70) | Max. Working Voltage (RCWV) | Max. Overload Voltage | Resistance Range | T.C.R. (PPM/) |
|---|---|---|---|---|---|---|
| 0201 | 0.600.03 x 0.300.03 x 0.230.03 | 1/20W | 25V | 50V | 1~10, 10~10M | 400 (1~10), 200 (10~10M) |
| 0402 | 1.000.05 x 0.500.05 x 0.350.05 | 1/16W | 50V | 100V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) |
| 0603 | 1.600.10 x 0.800.10 x 0.450.10 | 1/10W | 75V | 150V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) |
| 0805 | 2.000.10 x 1.250.10 x 0.500.10 | 1/8W | 150V | 300V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) |
| 1206 | 3.100.10 x 1.600.10 x 0.550.10 | 1/4W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) |
| 1210 | 3.100.10 x 2.500.15 x 0.550.10 | 1/2W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) |
| 1218 | 3.100.10 x 4.600.10 x 0.550.10 | 1W | 200V | 500V | 1~10, 10~1M | 200 (1~10), 100 (10~1M) |
| 1812 | 4.500.20 x 3.100.20 x 0.550.10 | 3/4W | 200V | 400V | 1~10, 10~10M | 200 (1~10), 100 (10~10M) |
| 2010 | 5.000.10 x 2.500.15 x 0.550.10 | 3/4W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) |
| 2512 | 6.350.10 x 3.100.15 x 0.550.10 | 1W | 200V | 400V | 1~10, 10~22M | 200 (1~10), 100 (10~22M) |
| Item | Test Method | Test Condition | Specification |
|---|---|---|---|
| Temperature Coefficient | JIS C 5201 4.8 / IEC60115-1-4.8 | TCR=(R-R0)/(t-t0)R010 (ppm) R0:resistance at room temperature; R:resistance at 125or -55; t0:room temperature; t:test temperature (125or -55) | As SPEC |
| Short-time overload | JIS C 5201 4.13 / IEC60115-1-4.13 | Applied 2.5 times of rated voltage for 5 second. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Solderability | JIS C 5201 4.17 / IEC60115-1-4.17 | Dip the terminal in a flux and then dip into a soldering bath at 2455 for 30.5sec. | 95% coverage |
| Resist to soldering heat | JIS C 5201 4.18 / IEC 60115-1-4.18 | Dip the terminal in a flux and then dip into a soldering bath at 2605 for 10 0.5sec. Measure the variation of resistance. | (1.00% +0.05) |
| Insulation resistance | JIS C 5201 4.6 / IEC60115-1-4.6 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. Then measure insulation resistance. | >10G |
| Dielectric withstanding voltage | JIS C 5201 4.7 / IEC60115-1-4.7 | Applied the dielectric withstanding voltage on the center of body for 605 seconds. | No evidence of flashover, arcing or insulation breakdown, mechanical damage |
| Terminal bending | JIS C 5201 4.33 / IEC60115-1-4.33 | Specimen shall be mounted on test board, then bend the board and maintained for 201s. the distance of bending is 5+0.2/0 mm for resistors which size no larger than 1206 or 2+0.2/0 mm which size larger than 1206. Measure the variation of resistance. | (1.00% +0.05) |
| Rapid temperature changes | JIS C 5201 4.19 / IEC60115-1-4.19 | Put specimen in a chamber which temperature can be T1-553T2 1553/1253, 30min, repeated 300 cycles. Measure the variation of resistance. | 0.5%, 1%: (1.0%+0.05) 5%: (2.0%+0.05) |
| Humidity | JIS C 5201 4.24 / IEC60115-1-4.24 | Put resistor in a constant temperature and humidity chamber, temperature 402, humidity 90~95%RH; apply rated voltage for 1.5 hours, then off for 0.5 hours; repeat power on/off until test time is 1000 +48/-0 hours. Measure the variation of resistance. | (Data not fully provided in source) |
2510101005_FOJAN-FRC0603F1002TS_C2906982.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
