<
>
Specifications
Number of Resistors:
9
Number of Pins:
10
Tolerance:
±5%
Resistance:
29kΩ
Power(Watts):
125mW
Temperature Coefficient:
±100ppm/℃
Mfr. Part #:
A10-293JP
Package:
SIP-10-2.54mm
Key Attributes
Model Number:
A10-293JP
Product Description
Thick Film Network Resistor
Product Overview
This Thick Film Network Resistor offers industry-standard size and miniature, high-density assembly capabilities. It is designed for high reliability and long life, with excellent moisture-proof and cauterization resistance. The product supports free design and can be manufactured according to consumer requirements. It is ideally suited for applications in industrial equipment, household appliances, medical equipment, and test and measurement equipment.
Product Attributes
- Substrate Material: Ceramic
- Conductor Material: Not specified
- Resistor Layer Material: Not specified
- Protection Coating Material: Not specified
- Lead Material: Not specified
- Outer Coating: Not specified
- Environmental Feature: Lead-Free option available (Code P)
Technical Specifications
| Feature | Specification | Details/Code |
|---|---|---|
| Type Code | A, B, C, D, E, F, G, H, T | |
| Power Rating Code | Blank (1/8W), H (1/4W) | |
| Pins | 04, 14, 08 | |
| Resistance Value Code | 3-digit | Example: 473 = 47K Ω; 331 = 330 Ω |
| Resistance Value Code (E, F, H, T type) | 3-digit | Example: 331 = 330 Ω |
| Tolerance Code | J (1%), F (2%), G (5%) | |
| Pin Distance Code | Blank (2.54 mm), Y (1.778 mm) | |
| Lead-Free Code | P | |
| Equivalent Circuit Types | R1, R2, Rn, n+1, 2n+1, n, R, 0R | Visual representations of various network configurations |
| Normal Dimension Code | 2.54 (n-1)+2.50max | |
| Type A Dimension | 5.80max | |
| Type B Dimension | 9.20max | |
| Type T Dimension | 3.20max | |
| Operating Temperature Range | -55 °C to +125 °C | |
| Rated Temperature | +70 °C | |
| Power Rating | 1/8W (1/4W) | |
| Max. Operating Voltage | 200V | |
| Max. Overload Voltage | 280V | |
| Jumper Rated Current | 2A | |
| Resistance Tolerance | 1%, 2%, 5% | |
| Resistance Range | 0 Ω to 10M Ω | Jumper: 50m Ω |
| Temperature Coefficient (T.C.R.) | 100ppm/°C (for R ≥ 10 Ω), 250ppm/°C (for 1 Ω < R < 10M Ω) | |
| Packaging Quantity | Bag (200pcs), Box (10 Bags), Case (25 Boxes) | |
| Packaging Label | Plastics 4/5/10 Bags/Box, 25 Boxes/Case | |
| Test Method (Resistance to Soldering Heat) | IEC 60115-1 4.17 | 260 ±5 °C, 2 ±0.5s |
| Test Method (T.C.R.) | IEC 60115-1 4.8 | ±25 /+125 /+25 within specified T.C.R |
| Test Method (Short Time Overload) | IEC 60115-1 4.13 | Apply 2.5 times rated voltage or Max overload voltage, whichever is lower, for 5s. |
| Test Method (Rapid Change of Temperature) | IEC 60115-1 4.19 | -55 °C (30min) → normal temp (5min) → 125 ±5 °C (30min) 5 cycles |
| Test Method (Endurance at 70 °C) | IEC 60115-1 4.25.1 | 70 ±2 °C, 1000h. Rated voltage or limiting element voltage whichever is lower. 1.5h ON/0.5h OFF. |
| Test Method (Damp Heat Steady State) | IEC 60115-1 4.18 | 40 ±2 °C, 93% 3%RH, 1000h. Apply rated voltage or Max working voltage, whichever is lower, for 1.5h on, 0.5h off for 1000h. |
| Test Method (Terminal Strength) | GB/T 8976-1996 4.5.12 | 95% No abnormal appearance after the test, and the rate of not less than 95% |
| Test Method (Solderability) | IEC 60115-1 4.24 | 260 ±5 °C, 2 ±0.5s. |
| Test Method (Endurance at Upper Category Temperature) | IEC 60115-1 4.25.3 | 125 ±3 °C, 1000h. |
| Coating Dielectric Withstanding Voltage | 500VDC 1min. | No arc, burning or other breakdown phenomenon. |
| Coating Insulation Resistance | ≥ 100M Ω | 500VDC 1min. |
2410121742_FH-A10-293JP_C431683.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
