<
>
Specifications
Number of Resistors:
4
Number of Pins:
8
Tolerance:
±1%
Resistance:
150Ω
Power(Watts):
62.5mW
Temperature Coefficient:
±100ppm/℃
Mfr. Part #:
RC-ML08W151FT
Package:
0603x4
Key Attributes
Model Number:
RC-ML08W151FT
Product Description
Product Overview
These thick film chip network resistors offer miniature size, light weight, and stable electrical performance with high reliability. They are designed for low assembly costs and compatibility with automatic SMT equipment, featuring superior mechanical strength and high-frequency characteristics. The products are compliant with RoHS and Halogen-free requirements, making them suitable for a wide range of electronic applications.
Product Attributes
- Certifications: RoHS Compliant, Halogen Free
- Construction: Thick Film Chip Network Resistor
Technical Specifications
| Model | Type Code | Dimensions (mm) L | Dimensions (mm) W | Dimensions (mm) t | Dimensions (mm) P | Dimensions (mm) a | Dimensions (mm) c | Dimensions (mm) b | Terminal Style | Packaging Style | Terminal Number | Resistor Numbers | Rated Power at 70 (W) | Rated Current for Chip Jumper at 70 (A) | Limiting Element Voltage (V) | Max.Overload Voltage (V) | Resistance Range | T.C.R (ppm/) | Operating Temperature Range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RCMT08 | RC-M | 1.00 0.10 | 0.50 0.10 | 0.45 0.10 | 0.30 0.05 | 0.10 0.15 | 0.10 0.25 | 0.10 0.10 | Flat type with corner (F) | Tape & Reel (T) | 08 | 4 | 1/16 | 1 | 50 | 100 | 1 R10 , 10 R1M , R1M | 400, 250, 100 | -55 ~ 125 |
| RCML08 | RC-M | 2.00 0.10 | 1.60 0.15 | 0.50 0.10 | 0.80 0.10 | 0.40 0.10 | 0.30 0.20 | 0.20 0.15 | Conver type with corner (W) | Case (C) | 08 | 4 | 1/16 | 1 | 50 | 100 | 1 R10 , 10 R1M , R1M | 400, 250, 100 | -55 ~ 155 |
| RCMY08 | RC-M | 1.00 0.10 | 0.40 0.10 | 0.35 0.10 | 0.10 0.07 | 0.10 0.15 | 0.10 0.20 | 0.10 0.10 | Flat type with corner (F) | Tape & Reel (T) | 08 | 4 | 1/32 | 0.5 | 12.5 | 25 | 1 R10 , 10 R1M , R1M | 200, 250, 250 | -55 ~ 125 |
| RCMT08 | RC-M | 1.00 0.10 | 0.50 0.10 | 0.45 0.10 | 0.30 0.05 | 0.10 0.15 | 0.10 0.25 | 0.10 0.10 | Flat type with corner (F) | Tape & Reel (T) | 02 | 1 | 1/16 | - | - | - | 10m R 50m (F), 10m R 20m (G), 10m R 10m (J) | - | - |
| RCML08 | RC-M | 2.00 0.10 | 1.60 0.15 | 0.50 0.10 | 0.80 0.10 | 0.40 0.10 | 0.30 0.20 | 0.20 0.15 | Conver type with corner (W) | Case (C) | 02 | 1 | 1/16 | - | - | - | 10m R 50m (F), 10m R 20m (G), 10m R 10m (J) | - | - |
| RCMY08 | RC-M | 1.00 0.10 | 0.40 0.10 | 0.35 0.10 | 0.10 0.07 | 0.10 0.15 | 0.10 0.20 | 0.10 0.10 | Flat type with corner (F) | Tape & Reel (T) | 02 | 1 | 1/32 | - | - | - | 10m R 50m (F), 10m R 20m (G), 10m R 10m (J) | - | - |
| Item | Specifications | Test Methods (IEC 60115-1) |
|---|---|---|
| Solderability | Solderable area 95% | IEC 60115-1 4.17 |
| Resistance to Soldering Heat | No mechanical damage | IEC 60115-1 4.18 |
| T.C.R | Within specified T.C.R | IEC 60115-1 4.8 |
| Rapid Change of Temperature | No mechanical damage | IEC 60115-1 4.13 |
| Short Time Overload | No mechanical damage | IEC 60115-1 4.39 |
| Shear Test | No mechanical damage | IEC 60115-1 4.32 |
| Substrate Bending Test | No mechanical damage | IEC 60115-1 4.33 |
| Component Solvent Resistance | No mechanical damage | IEC 60115-1 4.29 |
| Insulation Resistance | 1000M | IEC 60115-1 4.6 |
| Endurance at Upper Category Temperature | No mechanical damage | IEC 60115-1 4.25.3 |
| Endurance at 70 | No mechanical damage | IEC 60115-1 4.25.1 |
| Damp Heat, Steady State | No mechanical damage | IEC 60115-1 4.24 |
| Voltage Proof | No breakdown or flashover | IEC 60115-1 4.7 |
| Operation at Low Temperature | No mechanical damage | IEC 60115-1 4.36 |
| Intermittent Overload | No breakdown or flashover | IEC 60115-1 4.19 |
Note: Packaging quantities and styles are detailed in Appendix 1, Table One and Table Two.
Resistance Value Code:
- E-24 Series (3 digits): First two digits are significant figures, third digit denotes number of zeros.
- E-96 Series (4 digits): First three digits are significant figures, fourth digit denotes number of zeros.
- Decimal point denoted by 'R'.
- Chip Jumper denoted by '0'.
Marking:
- 0402 size: No mark.
- 0603 size: E-24 series marked with 3 digits; E-96 series marked with 3 digits.
- All thin film resistors use four-digit resistance value codes.
2410121336_FH-RC-ML08W151FT_C2842068.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
