<
>
Specifications
Resistance:
820Ω
Power(Watts):
250mW
Voltage Rating:
200V
Operating Temperature:
-55℃~+155℃
Type:
Fuse Resistor
Tolerance:
±5%
Mfr. Part #:
FCR1206J820RP05Z
Package:
1206
Key Attributes
Model Number:
FCR1206J820RP05Z
Product Description
Everohms Fusible Chip Resistor - FCR Series
The Everohms FCR Series Fusible Chip Resistors are designed for safety circuits in a wide range of electronic applications. These resistors offer accurate fusibility, are small and lightweight, and feature a low temperature coefficient (under 600 PPM/) and a noncombustible insulated coat. They can also be used as general-purpose resistors.
Product Attributes
- Brand: Everohms
- Origin: Taiwan (inferred from TEL/FAX numbers)
Technical Specifications
| Type | L (mm) | W (mm) | H (mm) | l1 (mm) | l2 (mm) | Rated Power at 70 | Max Hold-Off Voltage | Fusing Time & Min. Fusing Power | Resistance Range | T.C.R. (PPM/) | Standard Tolerance (%) |
| FCR0402 | 1.00 0.10 | 0.50 0.05 | 0.30 0.05 | 0.15 0.10 | 0.20 0.10 | 0.063W | 50V | 30 sec at 2.5W | 1~1K | 1~47 (600PPM), 48~470 (400PPM), 471~1K (200PPM) | 5%,10% (1%,2% available) |
| FCR0603 | 1.60 0.20 | 0.80 0.15 | 0.40 0.10 | 0.30 0.20 | 0.30 0.10 | 0.1W | 100V | 30 sec at 3W | |||
| FCR0805 | 2.00 0.20 | 1.25 0.15 | 0.50 0.15 | 0.30 0.15 | 0.40 0.15 | 0.125W | 150V | 30 sec at 3.25W | |||
| FCR1206 | 3.05 0.10 | 1.60 0.20 | 0.55 0.15 | 0.40 0.20 | 0.50 0.20 | 0.25W | 200V | 30 sec at 5W | |||
| FCR1210 | 3.05 0.10 | 2.50 0.20 | 0.55 0.15 | 0.50 0.20 | 0.50 0.20 | 0.33W | 250V | 30 sec at 7.5W | |||
| FCR2010 | 5.00 0.20 | 2.50 0.20 | 0.55 0.10 | 0.60 0.20 | 0.60 0.20 | 0.5W | 300V | 30 sec at 11.25W | |||
| FCR2512 | 6.30 0.20 | 3.20 0.20 | 0.55 0.10 | 0.60 0.20 | 0.60 0.20 | 1W | 400V | 30 sec at 15W |
| Item | Test Method | Procedure | Requirements |
| Temperature Coefficient of Resistance (T.C.R) | JIS C 5201-1 clause 4.8 | -55 or +155, 25 is the reference temperature | Refer to Ratings |
| Short Time Overload | JIS C 5201-1 clause 4.13 | General2.5 times RCWV or Max. Overload voltage whichever is less for 5 seconds. High Power2.5 times RCWV or Max. Overload voltage whichever is less for 2 seconds. | 1(1.0%+0.05) 5(2.0%+0.10) |
| IR Reflow | Sony SS-00254 | 1(1.0%+0.05) 5(1.0%+0.05) | |
| Leaching | Sony SS-00254-9 | 2605 for 30 seconds. | >95% Coverage |
| Soldering Heat | JIS C 5201-1 clause 4.18 | 2605 for 10 seconds. | 1(0.5%+0.05) 5(1.0%+0.05) |
| Temperature Cycling | JIS C 5201-1 clause 4.19 | -55 to +155,5 cycles | 0.1%0.5%1% (0.5%+0.05) 2%5%(1.0%+0.10) |
| Electric Iron | Sony SS-00254-5 | Preheating temperature35010 Electric iron preheating time3+1/-0 sec | 1(1.0%+0.05) 5(1.0%+0.05) |
| Resistance to Solvent | JIS C 5201-1 clause 4.29 | The tested resistor be immersed into isopropyl alcohol of 20~25 for 60 secs. Then the resistor is left in the room for 48 hrs. | 1(0.5%+0.05) 5(0.5%+0.05) |
| Load Life in Humidity | JIS C 5201-1 clause 4.24 | 402, 90~95% R.H. RCWV or Max. working voltage whichever is less for 1000 hrs with 1.5 hrsONand 0.5 hrOFF. | 0.1%0.5%1%(1.0%+0.05) 2%5%(2.0%+0.05) Value <1(2.0%+0.05) |
| Load Life (Endurance) | JIS C 5201-1 clause 4.25 | 702, RCWV or Max. working voltage whichever is less for 1000 hrs with 1.5 hrsONand 0.5 hrOFF. | 0.1%0.5%1% (1.0%+0.05) 2%5% (3.0%+0.10) Value <1(3.0%+0.10) |
| Insulation Resistance | JIS C 5201-1 clause 4.6 | 100V for 1 minute. | 10G |
| Terminal Bending Strength | JIS C 5201-1 clause 4.33 | Bending once for 5 seconds | D 040206030805=5mm 120612101812=3mm 1218201025122030=2mm 1(1.0%+0.05) 5(1.0%+0.05) |
| Type | A (mm) | B (mm) | C (mm) |
| 0402 | 0.60 | 1.60 | 0.70 |
| 0603 | 0.80 | 2.40 | 1.00 |
| 0805 | 1.30 | 2.90 | 1.45 |
| 1206 | 2.20 | 4.20 | 1.80 |
| 1210 | 2.00 | 4.40 | 2.70 |
| 2010 | 3.80 | 6.60 | 2.70 |
| 2512 | 4.90 | 8.10 | 3.40 |
2304140030_EVER-OHMS-FCR1206J820RP05Z_C153339.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
