<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Load Capacitance:
9pF
Operating Temperature:
-40℃~+85℃
Equivalent Series Resistance(ESR):
65kΩ
Frequency:
32.768kHz
Mfr. Part #:
Q13MC14610004
Package:
MC-146
Key Attributes
Model Number:
Q13MC14610004
Product Description
Product Overview
The SEIKO EPSON CORPORATION MC-146 crystal unit (Product No.: Q13MC1461000400) is designed as a component for general consumer electronics equipment. It is RoHS compliant, with an exemption for lead in high melting type solder. This product is not intended for use in applications requiring extremely high reliability such as weapons of mass destruction, military purposes, satellites, rockets, space life support systems, or medical equipment.
Product Attributes
- Brand: SEIKO EPSON CORPORATION
- Origin: Japan
- Certifications: RoHS compliant
Technical Specifications
| Item | Symbol | Min. | Typ. | Max. | Unit | Conditions | Notes |
| Absolute maximum ratings | |||||||
| Storage temperature range | T_stg | -55 | +125 | C | Suppose to be within CI STD at + 25 C 3 C. | ||
| Maximum level of drive | GL | 1.0 | W | ||||
| Operating range | |||||||
| Operating temperature range | T_use | -40 | +85 | C | |||
| Level of drive | DL | 0.01 | 0.1 | 0.5 | W | ||
| Vibration mode | Fundamental | ||||||
| Static characteristics | |||||||
| Nominal Frequency | f_nom | 32.768 | kHz | ||||
| Frequency tolerance | f_tol | 20 10-6 | CL = 9 pF Ta = + 25 3 C Level of drive : 0.1 W | Not include aging | |||
| Motional resistance | R1 | 65 | k | CI meter : Saunders 140B Level of drive : 0.5 W | |||
| Motional capacitance | C1 | 1.9 | fF | ||||
| Shunt capacitance | C0 | 0.8 | pF | ||||
| Frequency temperature characteristics Turnover temperature | Ti | + 25 5 | C | Values are calculated by The frequencies at + 10, + 25, + 40 C with C-MOS circuit. | |||
| Parabolic coefficient | B | -0.04 | Max. | 10-6 /C2 | |||
| Isolation resistance | IR | 500 | Min. | M | DC 100 V 15, 60 seconds Between terminal # 1 and terminal # 4 | ||
| Frequency Aging | f_age | 3 10-6/year | Ta = + 25 C 3 C Level of drive : 0.1 W | ||||
| Environmental and Mechanical characteristics | |||||||
| Shock | f/f [1 106] | 5 | 100 g dummy (EPSON TOYOCOM Standard) drop from 1500 mm height on to the concrete 3 directions 10 times | *1*2 | |||
| Vibration | f/f [1 106] | 3 | 10 Hz to 55 Hz amplitude 0.75 mm 55 Hz to 500 Hz acceleration 98 m/s2 10 Hz 500 Hz 10 Hz 15 min./cycle 6 h (2 hours , 3 directions) | *3 | |||
| Resistance to soldering heat (Reflow characteristics) | f/f [1 106] | 5 | Treat the Reflow 2 times by the following profile in the next page | *3 | |||
| High temperature storage | f/f [1 106] | a ) 20 b ) 10 | a ) + 125 C 1 000 h b ) + 85 C 1 000 h | *3 | |||
| Low temperature storage | f/f [1 106] | 10 | - 55 C 1 000 h | *3 | |||
| Temperature humidity storage | f/f [1 106] | 10 | + 85 C 85 %RH 1000 h | *3 | |||
| Temperature cycle | f/f [1 106] | 10 | - 55 C + 125 C 30 minutes at each temperature 100 cycles | *3 | |||
| Shear | No peeling-off at a soldered part | 10 N press the side for 10 s 1 s. Ref. IEC 60068-2-21 | |||||
| Pull-off | No peeling-off at a soldered part | 10 N press the side for 10 s 1 s. Ref. IEC 60068-2-21 | |||||
| Substrate bending | No peeling-off at a soldered part | Bending width reaches 3mm and hold for 5 s 1 s 1 time Ref. IEC 60068-2-21 | |||||
| Solderability | Termination must be 95 % covered with fresh solder | Dip termination into solder bath at + 235 5 C for 3 s (Using rosin flux) | |||||
| Solvent resistance | The marking shall be legible | Ref. JIS C 0052 or IEC 60068-2-45 | |||||
2409291036_EPSON-Q13MC14610004_C397823.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
