<
>
Specifications
Mfr. Part #:
HQC1008-36NJ-T1
Package:
1008
Key Attributes
Model Number:
HQC1008-36NJ-T1
Product Description
EMTEK HQC1008-36NJ-T1 Ceramic Chip Inductor
The EMTEK HQC1008-36NJ-T1 is a ceramic chip inductor designed for various electronic applications. This specification outlines its electrical characteristics, dimensions, materials, reliability, and packaging details.
Product Attributes
- Brand: EMTEK
- Product Name: HQC1008-36NJ-T1
- Origin: Taiwan, R.O.C.
- Material: Al2O3 96% (Core), Copper wire (Wire), UV Eopxy (Epoxy)
Technical Specifications
| Part Number | Inductance (nH)/MHz | Tolerance | Q/MHz Min. | SRF (Min.) (MHz) | Rdc () 20% | Irms Max. (mA) | Color Coding |
|---|---|---|---|---|---|---|---|
| HQC1008-36N-T1 | 36/50 | s=0.3%, G=2%, J=5%, K=10% | 75/350 | 1300 | 1500 | - | Orange Blue Black |
Dimensions
| Parameter | Value (mm) |
|---|---|
| A max. | 2.90 |
| B max. | 2.54 |
| C max. | 2.03 |
| D ref. | 1.30 |
| E | 0.45 0.1 |
Reliability Test
| Item | Specifications | Test Conditions |
|---|---|---|
| Solderability | 90% minimum solder coverage | Inductors shall be reflowed onto a PC board using 96.5 Sn/3.5 Ag solder paste. Solder process shall be at a maximum temperature of 260C. For 96.5 Sn/3.5 Ag solder paste:>217C for 90 seconds |
| Resistance | No case deformation or change in dimensions. Inductance must not change more than the stated tolerance. | Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. |
| Vibration | No case deformation or change in dimensions. Inductance must not change more than the stated tolerance. | Frequency: 10~50 Hz, Amplitude: 1.5mm |
| Static Humidity | No shorted or open winding. | Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. |
| Component adhesion (push test) | Withstand stated force without failure of the termination. | Inductors shall be subjected to 1.8Kg force. |
| High temperature resistance | No case deformation or change in dimensions. Inductance must not change more than the stated tolerance. | 1252 for 5012 hours. |
| Low temperature resistance | No case deformation or change in dimensions. Inductance must not change more than the stated tolerance. | -402 for 4812 hours. |
| Thermal shock resistance | No case deformation or change in dimensions. Inductance must not change more than the stated tolerance. | 10 cycles: -40 (30 min.) to +125 (30 min.) |
| Solder heat resistance | No case deformation, change in dimensions, or obliteration of marking. | Dip pads in flux and dip in solder pot (96.5 Sn/3.5 Ag) at 255C 5C for 10 seconds. |
Packaging
Packaging is designed to prevent damage during transport and storage. Standard reel size is 180 mm with 2,000 pcs./reel.
Recommended Soldering Conditions
Recommended for reflow soldering. For iron soldering, use a solder iron of less than 30W and avoid direct contact with the ceramic body.
Operating Conditions
- Operating temperature range: -40 to +125
- Storage condition: Temperature 20~25, Relative Humidity 40%~60%
2409301212_EMTEK-HQC1008-36NJ-T1_C251948.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
