<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
820uF
Height - Seated (Max):
20mm
Pin Spacing:
5mm
Voltage Rating:
35V
Diameter:
10mm
Equivalent Series Resistance(ESR):
35mΩ
Ripple Current:
1.5A@100KHz
Tolerance:
±20%
Mfr. Part #:
820uF35V10x20GF
Package:
Through Hole,D10xL20mm
Key Attributes
Model Number:
820uF35V10x20GF
Product Description
Product Overview
This document specifies the GF series aluminum electrolytic capacitors from Hubei Milang Xingchuang Electronics Co., Ltd. These capacitors are designed for various electronic applications requiring stable performance and long lifespan.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Product Series: GF SERIES
- Certifications: RoHS
- Sleeve Color: Green with white lettering (PET)
- Lead Type: Long leads
- Processing Form: Long leads
Technical Specifications
| Customer Part Number | Supplier PN | Series | Capacitance (uF) | Rated Voltage (V) | Size (D x L) | Tolerance | Dissipation Factor (DF) / 120Hz | Leakage Current (uA) 60s | Impedance () 100KHz | Ripple Current (mA) 100KHz 105 | Surge Voltage (V) | Working Temperature () | Multiplier for ripple current (100KHz) | Multiplier for ripple current vs temperature | |
| GF 820UF35V 10X20 | 820uF35V10x20GF | GF | 820.0 | 35.0 | 10.0 X 20.0 | -20% ~ +20% | 9.0 | 287.0 | 0.045 | 3000 | 1500.0 | 44.0 | -40+105 | 1.00 | 1.00 |
Test Items
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature:1052, Voltage :DC.Voltage+peak ripple voltage Rated voltage. Ripple frequency:100KHz | Refer to table |
| Surge | Temperature:1052, Applied voltage: see specification, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds. Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| Temperature Cycle | One Cycle: Rated high category temperature3 (303 min), 25 (3MAX min); Rated low category temperature3 (303 min), 25 (3MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605. Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%. Immersion depth: 1.5 to 2.0mm. Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355. Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%. Immersion depth: 1.5 to 2.0mm. Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| Low Temperature Characteristics (Max.Impedance Ratio) | Working Voltage (v): 6.3, 10, 16, 25, 35, 50, 63, 100. Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 | |
| High Humidty storage | Temperature:402, Relative humidity :90 to 95%. Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| Vent | Conduct under normal lighting for lab work. Capacitor diameter: Less than 22.4mm (Applied current(A): 1, Minutes: within 30); More than 22.5mm (Applied current(A): 10, Minutes: 9) | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing |
| Terminal strength: Tensile test intensity/winding intensity | Tensile test intensity: Diameter of terminal: 0.5d0.8 (Tensile Strength(n): 10, continued time: 101sec); 0.8d1.25 (Tensile Strength(n): 20, continued time: 101sec). Winding intensity: Diameter of terminal: 0.5d0.8 (Awl quality: 5, 0.51kg); 0.8d1.25 (Awl quality: 10, 1.02kg) | 1.No electrical or mechanical damage 2.No appearance damage |
| Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm. Cycle definition:10Hz to 55 Hz and back to 10Hz. Cycle duration :1 minute. Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage 2.No appearance damage |
| Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Packing
Bulk Packing: Includes long and short lead packaging. Outer box dimensions: 420X327X270mm.
Taped Packing: Standard packaging. Each outer box contains 10 inner boxes. Inner box dimensions: 345X235X55mm. Outer box dimensions: 490X355X295mm.
Box Packing: (Details not fully specified in source text)
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Capacitor Storage Validity: One year (recharge required after one year)
2507081835_Econd-820uF35V10x20GF_C49304890.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
