<
>
Specifications
Mfr. Part #:
LCF1206-3R3J-T
Package:
1206
Key Attributes
Model Number:
LCF1206-3R3J-T
Product Description
Product Overview
The LCF1206-Series is a ceramic chip inductance designed for various electronic applications. It offers reliable performance with clearly defined electrical characteristics, dimensions, and material specifications.
Product Attributes
- Brand: EMTEK
- Origin: Taiwan, R.O.C.
- Material: Al2O3 96% (Core), Copper wire (Wire), UV Epoxy (Epoxy)
- Color Coding: Red Orange
Technical Specifications
| Our Product Part Number | Inductance (nH)/MHz | Inductance Tolerance | Q (MHz) | SRF (MHz) | Rdc () Max. | Idc (mA) Min. | Irms (mA) Min. | Dimension A max. (mm) | Dimension B max. (mm) | Dimension C max. (mm) | Dimension D ref. (mm) | Dimension E (mm) |
| LCF1206-3R3-T | 3300/7.9 | J=5%K=10% | 400 | 450 | 1.32 | 240 | 330 | 3.56 | 2.16 | 1.52 | 0.51 | 0.510.1 |
Reliability Test
| Test Item | Specifications | Test Conditions |
| Solderability | 90% minimum solder coverage. | Dip pads in flux and dip in solder pot (96.5 Sn/3.5 Ag) at 255C 5C. |
| Resistance to solder heat | Inductance must not change more than the stated tolerance. | Inductors shall be reflowed onto a PC board using soldering heat (96.5 Sn/3.5 Ag solder paste:>217C for 90 seconds) at a maximum temperature of 260C. |
| Vibration | Inductance must not change more than the stated tolerance. | Frequency: 10~50 Hz, Amplitude: 1.5mm. Apply vibrations in each of the x,y and z directions for 2 hours for a total of 6 hours. |
| High temperature resistance | Inductance must not change more than the stated tolerance. | Inductors shall be subjected to temperature 1252 for 5012 hours. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. |
| Static Humidity | Inductors must not have a shorted or openwinding. | Inductors shall be subjected to temperature 852 and 90 to 95%RH. for ten 24-hours. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. |
| Component adhesion (push test) | The device must withstand the stated force without a failure of the termination. | Inductors shall be subjected to 1.0Kg (push test). A force gauge shall be applied to the side of the component. |
| Low temperature resistance | Inductance must not change more than the stated tolerance. | -402 for 4812 hours. Measure the test items after leaving the inductors at room temperature and humidity for 1 to 2 hours. |
| Resistance to solvent | There must be no case deformation, change in dimensions, or obliteration of marking. | Inductors must withstand 6 minutes of alcohol or water. |
| Thermal shock | Inductance must not change more than the stated tolerance. | Inductors shall be subjected to 10 cycles to the following temperature cycle: -40 (30 min.) +125 (30 min.). 30 sec. transition time. 1 cycle. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. |
Packaging
| Item | Dimensions (mm) | Details |
| Tape dimensions | W: 8 0.10, P: 4 0.10, P0: 4 0.10, P1: 2 0.10, A0: 2.14 0.05, B0: 3.56 0.05, K0: 1.5 0.05, t: 0.22 0.05 | Carrier tape, cavity dimensions, etc. |
| Reel dimensions | A: 180, B: 13, C: 14.4, D: 8.4, E: 60 | Standard reel size. |
| Tapping figure | Top cover tape, Carrier tape, Sprocket hole, Cavity (chip insert) | |
| Packaging Form | No continuation more than two vacancies of the product. | |
| Cover Tape Peel Strength | 0.1~0.6(N) | Tear off cover tape in arrow direction at 5 ~ 35, 45 ~ 85% RH, 860 ~ 1060 hpa. |
| Packing Quantity | 2,000 pcs./reel | For 180 mm reel type. Includes Chip Blank (50 pitches), Blank (360 mm) Leader. (70 pitches) |
Recommended Soldering Conditions
Reflow Soldering: Recommended for use. Reflow up to two times. Max temperature 260C for 4 seconds. Use a solder iron of less than 30W for iron soldering, avoiding direct contact with the ceramic body outside the terminal electrode.
Other Information
Operating temperature range: -40~+125 (Ceramic Series). Storage condition: Temperature 20~25, Relative Humidity 40%~60%. Recommended wire wound inductors should be used within 6 months from the time of delivery.
2410121623_EMTEK-LCF1206-3R3J-T_C252012.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
