<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
1500uF
Height - Seated (Max):
20mm
Pin Spacing:
3.5mm
Voltage Rating:
16V
Diameter:
8mm
Equivalent Series Resistance(ESR):
50mΩ
Tolerance:
±20%
Ripple Current:
1.3A@100KHz
Mfr. Part #:
1500uF16V8x20GF
Package:
Through Hole,D8xL20mm
Key Attributes
Model Number:
1500uF16V8x20GF
Product Description
Product Overview
This product is an aluminum electrolytic capacitor from the GF series, designed for various electronic applications. It offers reliable performance and durability.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD ()
- Series: GF
- Origin: China
- Certifications: RoHS
- Sleeve Material: PET (Green with white lettering)
- Lead Type: Long leads
- Working Temperature: -40 to +105
Technical Specifications
| Customer Part Number | Series | Capacitance (uF) | Rated Voltage (V) | Size (D x L) mm | Tolerance | Dissipation Factor (DF) / 120Hz (%) | Leakage Current (uA) 60s | Impedance () 100KHz | Life (Hrs) | Ripple Current (mA) 100KHz @105 | Surge Voltage (V) | Working Temperature () |
| GF 1500UF16V 8X20 | GF | 1500.0 | 16.0 | 8.0 X 20.0 | -20% ~ +20% | 10.0 | 240.0 | 0.05 | 2000 | 1300.0 | 20.0 | -40 to +105 |
Test Items
| Test Item | Conditions | Specifications |
| Maximum Permissible Ripple Current | Temperature: 1052, Voltage: DC.Voltage+peak ripple voltage Rated voltage, Ripple frequency: 100KHz | Refer to table |
| Surge | Temperature: 1052, Applied voltage: see specification, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds, Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Temperature Cycle | One Cycle: Rated high category temperature3 (303 min), 25 (3MAX min), Rated low category temperature3 (303 min), 25 (3MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605, Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355, Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| Low Temperature Characteristics (Max. Impedance Ratio) | Working Voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 |
| High Humidity Storage | Temperature: 402, Relative humidity: 90 to 95%, Duration: 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing |
| Terminal Strength: Tensile test intensity/winding intensity | Tensile test intensity: Diameter of terminal, Tensile Strength(N), continued time; Winding intensity: Diameter of terminal, winding Strength(N), Awl quality | Tensile test intensity: 0.5d0.8 (10N, 101sec), 0.8d1.25 (20N, 101sec) Winding intensity: 0.5d0.8 (5N, 0.51kg), 0.8d1.25 (10N, 1.02kg) 1.No electrical or mechanical damage 2.No appearance damage |
| Vibration | Frequency range: 10 Hz to 55 Hz, Amplitude: 1.5 mm, Cycle definition: 10Hz to 55 Hz and back to 10Hz, Cycle duration: 1 minute, Duration: 2 hours per direction (3 directions) | 1.No electrical or mechanical damage 2.No appearance damage |
| Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Packing
Bulk Packaging: Includes long and short lead packaging. Outer box dimensions: 420X327X270mm.
Taped Packaging: Standard packaging per box: 10 inner boxes. Inner box dimensions: 345X235X55mm. Outer box dimensions: 490X355X295mm.
Tray Packaging: Details not specified.
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Shelf Life: One year (re-charging required after one year)
2507111630_Econd-1500uF16V8x20GF_C49332870.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
