<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
220uF
Height - Seated (Max):
17mm
Voltage Rating:
63V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
240mΩ
Tolerance:
±20%
Ripple Current:
380mA@100KHz
Mfr. Part #:
220uF63V10x17GF
Package:
Through Hole,D10xL17mm
Key Attributes
Model Number:
220uF63V10x17GF
Product Description
Product Overview
The SHENZHEN MINGKANG ELECTRONIC CO.,LTD GF Series Aluminum Electrolytic Capacitors are designed for high-frequency, low-impedance applications. They offer a load life of 2000-4000 hours at 105 and comply with RoHS environmental standards. These capacitors are suitable for use in communication equipment, switching power supplies, industrial measuring instruments, LED lighting, and motherboards.
Product Attributes
- Brand: SHENZHEN MINGKANG ELECTRONIC CO.,LTD
- Series: GF Series
- Material: Aluminum Electrolytic
- Origin: Shenzhen, China
- Certifications: RoHS Compliant
Technical Specifications
| Item | Performance Characteristics | Range | Notes |
| Operating Temp. Range | -40~+105 | ||
| Rated Voltage Range | 6.3 to 100 VDC | ||
| Capacitance Range | 0.47 to 4700 F | ||
| Capacitance Tolerance | 20% (120Hz, 20) | ||
| Leakage Current | LC0.005CV or 3.0 (A) | After 2 minutes, whichever is greater, measured with rated working voltage applied | |
| Dissipation Factor (Tan) | (max, 120Hz, 20) | See table below | For capacitance 1000F, add 2% per anther 1000F |
| Low Temp. Characteristic | (Max Impedance Ratio) (120Hz) | See table below | For capacitance 1000F, add 0.5 per anther 1000F for Z(-20)/Z(+20); add 1 per anther 1000F for Z(-40)/Z(+20) |
| Load Life | 2000h (D 5~6.3), 3000h (D 8~10), 4000h (D 13~) | at 105, Rated DC working voltage | Capacitance change: 20% of initial; Dissipation factor: 200% of initial specified; Leakage current: initial specified |
| Shelf Life | 1000hrs | at 105, No applied voltage | After test requirements at +20: Same limits as Load life. Pre-treatment for measurements: DC working voltage for 30 minutes |
| Standards | JIS C-5141 and JIS C-5102 |
Dissipation Factor (DF%) at 120Hz, 20
| W.V(VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
| D.F(%) | 0.18 | 0.12 | 0.10 | 0.10 | 0.09 | 0.08 | 0.08 | 0.08 |
Low Temperature Characteristics (Max Impedance Ratio) at 120Hz
| W.V(VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
| Z(-20)/Z(+20) | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 |
| Z(-40)/Z(+20) | 8 | 6 | 4 | 3 | 3 | 3 | 3 | 3 |
Case Size, Ripple Current, and Impedance Table
| WV(V) | Cap(F) | 6.3( 8.0) | 10(13) | 16(20) | 25(32) | 35(44) | 50(63) | 63(79) | 100(125) | ||||||||||||||||||||
| Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | Size | Ripple(mArms) | Imped() | |||
| 1 | 5X11 | 25 | 3.950 | ||||||||||||||||||||||||||
| 2.2 | 5X11 | 35 | 2.800 | ||||||||||||||||||||||||||
| 3.3 | 5X11 | 45 | 2.000 | ||||||||||||||||||||||||||
| 4.7 | 5X11 | 58 | 1.800 | ||||||||||||||||||||||||||
| 10 | 5X11 | 56 | 2.100 | 5X11 | 110 | 1.700 | 5X11 | 120 | 1.600 | ||||||||||||||||||||
| 22 | 5X11 | 120 | 1.800 | 5X11 | 130 | 1.360 | 5X11 | 180 | 1.000 | ||||||||||||||||||||
| 33 | 5X11 | 150 | 1.200 | 5X11 | 180 | 0.950 | 6.3X12 | 250 | 0.450 | ||||||||||||||||||||
| 47 | 5X11 | 220 | 1.100 | 5X11 | 300 | 0.450 | 6.3X12 | 290 | 0.350 | ||||||||||||||||||||
| 56 | 5x11 | 245 | 0.45 | 6.3x11 | 340 | 0.300 | 8x12 | 490 | 0.280 | ||||||||||||||||||||
| 68 | 6.3x11 | 255 | 0.26 | 6.3x11 | 340 | 0.230 | 8x12 | 540 | 0.220 | ||||||||||||||||||||
| 100 | 6.3X12 | 350 | 0.220 | 6.3X12 | 450 | 0.200 | 8X12 | 550 | 0.170 | ||||||||||||||||||||
| 150 | 8x12 | 640 | 0.19 | 8x12 | 645 | 0.165 | 8x16 | 730 | 0.085 | ||||||||||||||||||||
| 220 | 6.3X12 | 550 | 0.150 | 8X12 | 650 | 0.100 | 8X16 | 850 | 0.065 | ||||||||||||||||||||
| 330 | 8X12 | 800 | 0.110 | 8X14 | 840 | 0.080 | 10X20 | 1150 | 0.055 | ||||||||||||||||||||
| 470 | 8X12 | 840 | 0.080 | 8X14 | 840 | 0.076 | 10x12 | 865 | 0.076 | 10X20 | 1300 | 0.046 | 13x25 | 1950 | 0.034 | ||||||||||||||
| 560 | 10x16 | 1210 | 0.060 | 10x16 | 1300 | 0.046 | 13x20 | 1950 | 0.034 | ||||||||||||||||||||
| 680 | 8X16 | 1220 | 0.068 | 10X16 | 1300 | 0.050 | 13X20 | 1750 | 0.040 | ||||||||||||||||||||
| 1000 | 10X16 | 1400 | 0.045 | 10X20 | 1650 | 0.045 | 13X25 | 1880 | 0.030 | ||||||||||||||||||||
| 1200 | 10x13 | 865 | 0.080 | 10x16 | 1210 | 0.060 | 10x16 | 1310 | 0.046 | ||||||||||||||||||||
| 1500 | 8x20 | 1050 | 0.069 | 10x16 | 1350 | 0.046 | 10x16 | 1400 | 0.042 | ||||||||||||||||||||
| 2200 | 1016 | 1350 | 0.046 | 1020 | 1400 | 0.046 | 1025 | 1650 | 0.042 | 1320 | 1900 | 0.035 | |||||||||||||||||
| 3300 | 1025 | 1650 | 0.042 | 13x20 | 1900 | 0.035 | 1325 | 2100 | 0.030 | ||||||||||||||||||||
| 4700 | 1320 | 2000 | 0.030 | 1320 | 2100 | 0.030 | 1625 | 2410 | 0.025 | ||||||||||||||||||||
| 10 | 5X11 | 80 | 2.500 | ||||||||||||||||||||||||||
| 22 | 6.3X12 | 110 | 0.960 | 6.3X12 | 180 | 0.900 | |||||||||||||||||||||||
| 33 | 6.3X12 | 135 | 0.600 | 8X12 | 280 | 0.490 | |||||||||||||||||||||||
| 47 | 8X12 | 210 | 0.500 | 10X13 | 350 | 0.420 | |||||||||||||||||||||||
| 56 | 8X12 | 232 | 0.500 | 8X20 | 362 | 0.260 | |||||||||||||||||||||||
| 68 | 8X12 | 260 | 0.400 | 10X16 | 460 | 0.300 | |||||||||||||||||||||||
| 100 | 8X16 | 300 | 0.360 | 10X16 | 540 | 0.200 | 10X13 | 314 | 0.344 | 10X20 | 550 | 0.170 | |||||||||||||||||
| 150 | 8X20 | 360 | 0.260 | 10X20 | 580 | 0.170 | |||||||||||||||||||||||
| 220 | 10X16 | 380 | 0.240 | 13X20 | 860 | 0.110 | 10X20 | 460 | 0.160 | 13X25 | 920 | 0.096 | |||||||||||||||||
| 330 | 13X20 | 980 | 0.080 | 16X25 | 1400 | 0.090 | |||||||||||||||||||||||
| 470 | 13X20 | 1500 | 0.070 | 16X25 | 1520 | 0.080 | |||||||||||||||||||||||
| 680 | 13X25 | 1600 | 0.060 | 18X30 | 1750 | 0.050 | |||||||||||||||||||||||
| 1000 | 13X25 | 1800 | 0.050 | 16X25 | 2000 | 0.048 | 18X40 | 2540 | 0.030 | ||||||||||||||||||||
2507081835_Econd-220uF63V10x17GF_C49304941.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
