<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-25℃~+105℃
Capacitance:
47uF
Height - Seated (Max):
11mm
Pin Spacing:
2mm
Voltage Rating:
25V
Diameter:
5mm
Ripple Current:
80mA@120Hz
Mfr. Part #:
47UF25VC110KM
Package:
Through Hole,D5xL11mm
Key Attributes
Model Number:
47UF25VC110KM
Product Description
Product Overview
This document outlines the specifications for the KM Series aluminum electrolytic capacitors manufactured by Hubei Milang Xingchuang Electronics Co., Ltd. These capacitors are designed for various electronic applications and come with detailed technical specifications, testing procedures, and packaging information.
Product Attributes
- Brand: MILANG
- Origin: Hubei, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: KM
- Certifications: RoHS
- Sleeve Material: PET (Black with white lettering)
Technical Specifications
| Part Number | Series | Capacitance (uF) | Rated Voltage (WV) | Size (D x L) | Tolerance | D.F./120Hz | Leakage Current (uA, 60s) | Impedance (, 100KHz) | Life (Hrs) | Ripple Current (mA, 120Hz, 105) | Surge Voltage | Working Temperature () |
| KM | KM | 47.0 | 25 | 5.0 X 11 | -20% ~ +20% | 14 | 11.8 | / | 2000 | 80 | / | -25 ~ +105 |
Dimensions (Unit: mm)
| Symbol | Dimension | Tolerance |
| D | 5.0 | 0.5 |
| L | 11.0 | 1.5 |
| F | 2.0 | 0.5 |
| d | 0.5 | 0.05 |
Marking
Item | Description
1. Logo
2. Capacitance and Rated Voltage
3. Polarity bar
4. Series
5. Operating Temperature Range and Capacitance Tolerance
6. RoHS
7. Production Date (YYMM)
8. Sleeve Material
Testing Items
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature: 1052; Voltage: DC Voltage + peak ripple voltage Rated voltage; Ripple frequency: 120Hz | Refer to table |
| Surge | Temperature: 1052; Applied voltage: see specification; "ON" position: 30 seconds; "OFF" position: 5 minutes 30 seconds; Duration: 1000 cycles | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Temperature Cycle | One Cycle: Rated low category temperature3 (303 min) -> 25 (3 MAX min); Total number of cycles: 5 | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time: 1202 seconds to reach 1202; Solder bath temperature: 2605; Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355; Solder bath composition: Sn-96.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | A minimum of 95% of the immersed surface is to be coated with the new solder. |
| Low Temperature Characteristics (Max. Impedance Ratio) | Working Voltage (V) | Impedance Z(-40)/Z(+20) |
| 6.3, 10, 16, 25, 35, 50, 63, 100 | 8, 6, 4, 3, 3, 3, 3, 3 | |
| 160, 200, 250, 350, 400, 420, 450 | 3, 3, 4, 4, 6, 6, 8 | |
| High Humidity Storage | Temperature: 402; Relative humidity: 90 to 95%; Duration: 2408 hours | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing. |
| Terminal Strength (Tensile/Bending) | Tensile Test Intensity: Diameter of terminal (mm) / Tensile Strength (N) / Continued time | 0.5d0.8 / 10 / 101sec 0.8d1.25 / 20 / 101sec |
| Bending Strength: Diameter of terminal (mm) / Winding Strength (N) / Awl quality | 0.5d0.8 / 5 / 0.51kg 0.8d1.25 / 10 / 1.02kg | |
| Vibration | Frequency range: 10 Hz to 55 Hz; Amplitude: 1.5 mm; Cycle definition: 10Hz to 55 Hz and back to 10Hz; Cycle duration: 1 minute; Duration: 2 hours per direction (3 directions) | 1. No electrical or mechanical damage. 2. No appearance damage. |
| Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current within 200% of the specification value. |
Packaging
6.1 Loose Packing
- Bag Size: (Diagrammatic)
- Outer Box Size: 420X327X270mm
6.2 Taping Packaging
- Inner Box Size: 345X235X55mm
- Outer Box Size: 490X355X295mm
- Each outer box contains 10 inner boxes.
6.3 Arranged Box Packaging
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Shelf Life: One year (re-charging required after one year)
2504101957_Econd-47UF25VC110KM_C46867096.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
