<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-25℃~+105℃
Capacitance:
1000uF
Height - Seated (Max):
14mm
Voltage Rating:
10V
Pin Spacing:
3.5mm
Diameter:
8mm
Ripple Current:
500mA@120Hz
Tolerance:
±20%
Mfr. Part #:
1000uF10V8x14KM
Package:
Through Hole,D8xL14mm
Key Attributes
Model Number:
1000uF10V8x14KM
Product Description
Product Overview
This document details the specifications for the MILANG XINGCHAUNG ELECTRONICS CO.,LTD KM Series Aluminum Electrolytic Capacitor. Designed for various electronic applications, these capacitors offer reliable performance with a focus on durability and specific electrical characteristics.
Product Attributes
- Brand: MILANG XINGCHAUNG ELECTRONICS CO.,LTD
- Product Series: KM Series
- Origin: Hubei, China
- Color: Black sleeve with white lettering (PET sleeve)
- Certifications: RoHS
Technical Specifications
| Supplier PN | Series | CAP.(uF) | WV(V) | Size (D x L) | Tolerance | D.F/120Hz | LC(uA)60s | 100KHz() | Life(Hrs) | R.C.mA120Hz 105 | Sleeve | Working Temperature () |
| KM 1000UF10V 8X14 | KM | 1000.0 | 10 | 8.0 X 14 | - 20 % 20 % | 19 | 100.0 | / | 2000 | 500 | Black PET (Long leads) | -25+105 |
Testing Conditions
| Test Item | Conditions | Specifications | ||
| Maximum permissible ripple current | Temperature:1052, Voltage :DC.Voltage+peak ripple voltageRated voltage, Ripple frequency: 120Hz | Refer to table | ||
| Surge | Temperature:1052, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds, Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. | ||
| Temperature Cycle | One Cycle: Rated low category temperature3 (303 min) to 25 (3MAX min), Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. | ||
| Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605, Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. | ||
| Solder Ability | Solder bath temperature: 2355, Solder bath composition: Sn-96.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder | ||
| Low Temperature Characteristics(Max. Impedance Ratio) | Working Voltage (v) | Impedance Z(-40)/Z(+20) | ||
| 6.3, 10, 16, 25, 35, 50, 63, 100 | 8, 6, 4, 3, 3, 3, 3, 3 | |||
| Working Voltage (v) | Impedance Z(-25)/Z(+20) | |||
| 160, 200, 250, 350, 400, 420, 450 | 3, 3, 4, 4, 6, 6, 8 | |||
| High Humidity storage | Temperature:402, Relative humidity :90 to 95%, Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. | ||
| Vent | Capacitor diameter | Applied current(A) | Minutes | |
| Less than 22.4mm | 1 | within 30 | ||
| More than 22.5mm | 10 | 9 | ||
| Terminal strengthTensile test intensity/winding intensity | Tensile test intensity | Diameter of terminalmm) | Tensile Strength(N) | Continued time |
| 0.5d0.8 | 10 | 101sec | 1.No electrical or mechanical damage 2.No appearance damage | |
| 0.8d1.25 | 20 | |||
| Winding intensity | Diameter of terminalmm) | Winding Strength(N) | Awl quality | |
| 0.5d0.8 | 5 | 0.51kg | ||
| 0.8d1.25 | 10 | 1.02kg | 10 | |
| Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm, Cycle definition:10Hz to 55 Hz and back to 10Hz, Cycle duration :1 minute, Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage 2.No appearance damage | ||
| Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105.After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. | ||
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage.After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Storage Conditions
Storage Temperature: 35, Storage Humidity: 75%RH, Shelf life: One year (recharge required after one year).
2507111630_Econd-1000uF10V8x14KM_C49332838.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
