<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
1000uF
Height - Seated (Max):
25mm
Pin Spacing:
5mm
Voltage Rating:
50V
Diameter:
13mm
Ripple Current:
1.25A@120Hz
Tolerance:
±20%
Mfr. Part #:
1000uF50V13x25KM
Package:
Through Hole,D13xL25mm
Key Attributes
Model Number:
1000uF50V13x25KM
Product Description
ALUMINUM ELECTROLYTIC CAPACITORS
Econd KM Series Aluminum Electrolytic Capacitors are designed for demanding applications in communication equipment, switching power supplies, and industrial measuring instruments. These capacitors offer a load life of 2000-3000 hours at 105 and comply with RoHS environmental requirements.
Product Attributes
- Brand: Econd
- Series: KM
- Certifications: RoHS Compliant, JIS C-5141, JIS C-5102
Technical Specifications
| Item | Performance Characteristics | Range 1 | Range 2 |
| Operating Temp. Range | -40~+105 | -25~+105 | |
| Rated Voltage Range | 6.3 to 100 VDC | 160 to 450 VDC | |
| Capacitance Range | 0.47 to 22000 F | 0.47 to 470 F | |
| Capacitance Tolerance | (120Hz, 20) | 20% | |
| Leakage Current | (After 2 minutes with rated working voltage applied) | LC0.01CV or 3.0 (A) | LC0.03CV +40 (A) |
| Dissipation Factor(Tan) | (max, 120Hz, 20) | For capacitance 1000F, add 0.02 per another 1000F | |
| Low Temp. Characteristic (Max Impedance Ratio) | (120Hz) | For capacitance 1000F, add 0.5 per another 1000F for Z(-25)/Z(+20); add 1 per another 1000F for Z(-40)/Z(+20) | |
| Load Life Test Conditions | Duration time: 5~6.3 :2000hrs, 10 :3000hrs; Ambient temperature: +105; Applied voltage: Rated DC working voltage | After test requirements at +20: Capacitance change: within20% of initial; Dissipation factor: 200% of initial specified; Leakage current: initial specified value | |
| Shelf Life Test Conditions | Duration time: 1000hrs; Ambient temperature: +105; Applied voltage: None | After test requirements at +20: Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. | |
Dissipation Factor (D.F. %) vs. Working Voltage (W.V. VDC)
| W.V.(VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 450 |
| D.F.(%) | 0.22 | 0.19 | 0.16 | 0.14 | 0.12 | 0.10 | 0.09 | 0.08 | 0.12 | 0.12 | 0.12 | 0.15 | 0.15 | 0.17 |
Low Temperature Characteristic (Max Impedance Ratio) vs. Working Voltage (W.V. VDC)
| W.V.(VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 420 | 450 |
| Z(-25)/Z(+20) | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 6 | 6 | 15 |
| Z(-40)/Z(+20) | 8 | 6 | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
2507081835_Econd-1000uF50V13x25KM_C49304880.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
