<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
330uF
Height - Seated (Max):
14mm
Pin Spacing:
2.5mm
Voltage Rating:
35V
Diameter:
8mm
Equivalent Series Resistance(ESR):
80mΩ
Ripple Current:
840mA@100KHz
Tolerance:
±20%
Mfr. Part #:
330uF35V8x14GF
Package:
Through Hole,D8xL14mm
Key Attributes
Model Number:
330uF35V8x14GF
Product Description
Product Overview
The SHENZHEN MINGKANG ELECTRONIC CO.,LTD GF Series Aluminum Electrolytic Capacitors are designed for high-frequency, low-impedance applications. They offer a load life of 2000 to 4000 hours at 105 and comply with RoHS environmental requirements. These capacitors are suitable for use in communication equipment, switching power supplies, industrial measuring instruments, LED applications, and motherboards.
Product Attributes
- Brand: SHENZHEN MINGKANG ELECTRONIC CO.,LTD
- Series: GF Series
- Origin: Shenzhen, China
- Material: Aluminum Electrolytic
- Certifications: RoHS Compliant
Technical Specifications
| Item | Performance Characteristics | Unit | Notes |
| Operating Temp. Range | -40~+105 | ||
| Rated Voltage Range | 6.3 to 100 | VDC | |
| Capacitance Range | 0.47 to 4700 | F | |
| Capacitance Tolerance | 20% | (120Hz, 20) | |
| Leakage Current | LC≤0.005CV or 3.0 | A | After 2 minutes, whichever is greater, measured with rated working voltage applied |
| Dissipation Factor (Tan) | See table below | % | (max, 120Hz, 20). For capacitance >1000F, add 2% per anther 1000F |
| Low Temp. Characteristic (Max Impedance Ratio) | See table below | (120Hz). For capacitance >1000F, add 0.5 per anther 1000F for Z(-20)/Z(+20), add 1 per anther 1000F for Z(-40)/Z(+20) | |
| Load Life | 2000~4000 | hrs | at 105. Test conditions: Rated DC working voltage, Ambient temperature +105. After test requirements at +20: Capacitance change ≤±20% of initial, Dissipation factor ≤200% of initial specified, Leakage current ≤ initial specified. |
| Shelf Life | 1000 | hrs | at +105. No applied voltage. After test requirements at +20: Same limits as Load life. Pre-treatment: DC working voltage for 30 minutes. |
| Standards | JIS C-5141 and JIS C-5102 |
| WV(VDC) | D.F.(%) (max, 120Hz, 20) | WV(VDC) | Z(-20)/Z(+20) (max, 120Hz) | Z(-40)/Z(+20) (max, 120Hz) |
| 6.3 | 0.18 | 6.3 | 4 | 8 |
| 10 | 0.12 | 10 | 3 | 6 |
| 16 | 0.10 | 16 | 2 | 4 |
| 25 | 0.10 | 25 | 2 | 3 |
| 35 | 0.09 | 35 | 2 | 3 |
| 50 | 0.08 | 50 | 2 | 3 |
| 63 | 0.08 | 63 | 2 | 3 |
| 100 | 0.08 | 100 | 2 | 3 |
| Case Size DXL (mm) | WV(V) | Cap(F) | Maximum Allowable Ripple current(mArms, at 105 100KHz) | Maximum Impedance() at 20 100KHz |
| 5x11 | 6.3 | 10 | 85 | 2.560 |
| 5x11 | 6.3 | 22 | 115 | 1.950 |
| 5x11 | 6.3 | 33 | 110 | 1.700 |
| 5x11 | 6.3 | 47 | 150 | 1.340 |
| 5x11 | 6.3 | 100 | 170 | 0.550 |
| 6.3x11 | 6.3 | 220 | 300 | 0.260 |
| 6.3x12 | 6.3 | 330 | 350 | 0.220 |
| 6.3x10 | 6.3 | 470 | 400 | 0.210 |
| 8x12 | 6.3 | 680 | 560 | 0.120 |
| 8x12 | 6.3 | 820 | 640 | 0.110 |
| 8x9 | 6.3 | 1000 | 770 | 0.080 |
| 10x13 | 6.3 | 1200 | 865 | 0.080 |
| 8x20 | 6.3 | 1500 | 1050 | 0.069 |
| 10x16 | 6.3 | 2200 | 1350 | 0.046 |
| 10x25 | 6.3 | 3300 | 1650 | 0.042 |
| 13x20 | 6.3 | 4700 | 2000 | 0.030 |
| 5x11 | 10 | 10 | 56 | 2.100 |
| 5x11 | 10 | 22 | 120 | 1.800 |
| 5x11 | 10 | 33 | 150 | 1.200 |
| 5x11 | 10 | 47 | 220 | 1.100 |
| 5x11 | 10 | 100 | 350 | 0.220 |
| 6.3x12 | 10 | 220 | 550 | 0.150 |
| 8x12 | 10 | 330 | 800 | 0.110 |
| 8x12 | 10 | 470 | 840 | 0.080 |
| 8x12 | 10 | 680 | 1220 | 0.068 |
| 8x12 | 10 | 1000 | 1400 | 0.045 |
| 10x16 | 10 | 1500 | 1800 | 0.038 |
| 10x20 | 10 | 2200 | 1650 | 0.040 |
| 13x25 | 10 | 3300 | 2124 | 0.030 |
| 13x20 | 10 | 4700 | 1900 | 0.035 |
| 5x11 | 16 | 10 | 120 | 1.600 |
| 5x11 | 16 | 22 | 180 | 1.000 |
| 6.3x12 | 16 | 33 | 250 | 0.450 |
| 6.3x12 | 16 | 47 | 290 | 0.350 |
| 8x12 | 16 | 100 | 550 | 0.170 |
| 8x12 | 16 | 150 | 640 | 0.190 |
| 8x16 | 16 | 220 | 850 | 0.065 |
| 8x16 | 16 | 330 | 865 | 0.085 |
| 8x20 | 16 | 470 | 1100 | 0.060 |
| 10x16 | 16 | 680 | 1300 | 0.050 |
| 10x16 | 16 | 1000 | 1400 | 0.045 |
| 10x20 | 16 | 1500 | 1650 | 0.045 |
| 13x25 | 16 | 2200 | 2150 | 0.030 |
| 16x25 | 16 | 3300 | 2550 | 0.022 |
| 5x11 | 25 | 10 | 110 | 1.700 |
| 5x11 | 25 | 22 | 130 | 1.360 |
| 5x11 | 25 | 33 | 180 | 0.950 |
| 5x11 | 25 | 47 | 300 | 0.450 |
| 6.3x12 | 25 | 100 | 450 | 0.200 |
| 8x12 | 25 | 150 | 645 | 0.165 |
| 8x16 | 25 | 220 | 840 | 0.085 |
| 8x16 | 25 | 330 | 860 | 0.065 |
| 8x20 | 25 | 470 | 1210 | 0.056 |
| 10x16 | 25 | 680 | 1300 | 0.050 |
| 10x20 | 25 | 1000 | 1650 | 0.040 |
| 13x20 | 25 | 1500 | 1900 | 0.035 |
| 13x25 | 25 | 2200 | 2124 | 0.030 |
| 16x25 | 25 | 3300 | 2550 | 0.020 |
| 5x11 | 35 | 10 | 120 | 1.600 |
| 5x11 | 35 | 22 | 180 | 1.000 |
| 6.3x12 | 35 | 33 | 250 | 0.450 |
| 6.3x12 | 35 | 47 | 290 | 0.350 |
| 8x12 | 35 | 100 | 550 | 0.170 |
| 8x12 | 35 | 150 | 640 | 0.190 |
| 8x16 | 35 | 220 | 850 | 0.065 |
| 8x16 | 35 | 330 | 865 | 0.085 |
| 8x20 | 35 | 470 | 1100 | 0.060 |
| 10x16 | 35 | 680 | 1300 | 0.050 |
| 10x20 | 35 | 1000 | 1650 | 0.045 |
| 13x20 | 35 | 1500 | 1900 | 0.035 |
| 13x25 | 35 | 2200 | 2124 | 0.030 |
| 16x25 | 35 | 3300 | 2550 | 0.020 |
| 5x11 | 50 | 10 | 110 | 1.700 |
| 5x11 | 50 | 22 | 130 | 1.360 |
| 5x11 | 50 | 33 | 180 | 0.950 |
| 5x11 | 50 | 47 | 300 | 0.450 |
| 6.3x12 | 50 | 100 | 450 | 0.200 |
| 8x12 | 50 | 150 | 645 | 0.165 |
| 8x16 | 50 | 220 | 840 | 0.085 |
| 8x16 | 50 | 330 | 860 | 0.065 |
| 8x20 | 50 | 470 | 1210 | 0.056 |
| 10x16 | 50 | 680 | 1300 | 0.050 |
| 10x20 | 50 | 1000 | 1650 | 0.040 |
| 13x20 | 50 | 1500 | 1900 | 0.035 |
| 13x25 | 50 | 2200 | 2124 | 0.030 |
| 16x25 | 50 | 3300 | 2550 | 0.020 |
| 5x11 | 63 | 10 | 80 | 2.500 |
| 6.3x12 | 63 | 22 | 110 | 0.960 |
| 6.3x12 | 63 | 33 | 135 | 0.600 |
| 8x12 | 63 | 47 | 210 | 0.500 |
| 8x12 | 63 | 100 | 300 | 0.360 |
| 8x20 | 63 | 150 | 360 | 0.260 |
| 10x16 | 63 | 220 | 380 | 0.240 |
| 10x20 | 63 | 330 | 460 | 0.160 |
| 13x20 | 63 | 470 | 1500 | 0.070 |
| 13x25 | 63 | 680 | 1600 | 0.060 |
| 13x25 | 63 | 1000 | 1800 | 0.050 |
| 16x25 | 63 | 1500 | 2000 | 0.048 |
| 18x30 | 63 | 2200 | 1750 | 0.050 |
| 5x11 | 100 | 22 | 180 | 0.900 |
| 8x12 | 100 | 47 | 280 | 0.490 |
| 10x13 | 100 | 100 | 314 | 0.344 |
| 10x20 | 100 | 150 | 580 | 0.170 |
| 13x20 | 100 | 220 | 860 | 0.110 |
| 13x25 | 100 | 330 | 980 | 0.080 |
| 16x25 | 100 | 470 | 1520 | 0.080 |
| 18x30 | 100 | 680 | 1750 | 0.050 |
| 18x36 | 100 | 1000 | 2400 | 0.038 |
| 16x25 | 100 | 1500 | 2450 | 0.025 |
| 18x40 | 100 | 2200 | 2540 | 0.030 |
2507081835_Econd-330uF35V8x14GF_C49304954.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
