<
>
Specifications
Lifetime:
5000hrs@105℃
Operating Temperature:
-25℃~+105℃
Capacitance:
10uF
Height - Seated (Max):
16mm
Pin Spacing:
5mm
Voltage Rating:
400V
Diameter:
10mm
Equivalent Series Resistance(ESR):
5Ω
Tolerance:
±20%
Ripple Current:
240mA@100KHz
Mfr. Part #:
10uF400V10x16FS
Package:
Through Hole,D10xL16mm
Key Attributes
Model Number:
10uF400V10x16FS
Product Description
Econd FS Series Aluminum Electrolytic Capacitors
The Econd FS Series Aluminum Electrolytic Capacitors are designed for energy-saving applications, including energy-saving lamps and high-end LED power supplies. These capacitors offer a long load life of 5000 hours at 105 and comply with RoHS environmental standards.
Product Attributes
- Brand: Econd
- Series: FS Series
- Certifications: RoHS Compliant
Technical Specifications
| Item | Performance Characteristics |
|---|---|
| Operating Temp. Range | -40~+105 |
| Rated Voltage Range | 200 to 450 VDC |
| Capacitance Range | 1.0 to 220 F |
| Capacitance Tolerance | 20% (120Hz, 20) |
| Leakage Current | LC0.01CV + 40 (A), at CV1000, After 1 minutes whichever is greater measured with rated working voltage applied; LC0.01CV + 100 (A), at CV1000, After 1 minutes whichever is greater measured with rated working voltage applied |
| Dissipation Factor (Tan) (max, 120Hz, 20) | W.V(VDC): 200, 250, 350, 400, 450 D.F(%): 0.12, 0.12, 0.15, 0.15, 0.15 |
| Low Temp. Characteristic (Max Impedance Ratio) (120Hz) | W.V(VDC): 200, 250, 350, 400, 450 Z(-25)/Z(+20): 3, 3, 5, 5, 6 Z(-40)/Z(+20): 6, 6, 6, 6, -- |
| Load Life Test conditions | Duration time: 5000hrs; Ambient temperature: +105; Applied voltage: Rated DC working voltage; After test requirements at +20: Capacitance change: Within20% of the initial measured; Dissipation factor: 200% of the initial specified value; Leakage current: the initial specified value |
| Shelf Life Test conditions | Duration time: 1000hrs; Ambient temperature: +105; Applied voltage: None; After test requirements at +20: Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30minutes |
| Others | JIS C-5141 and JIS C-5102 |
Case Size and Ripple Current
| WV(V) | Cap(F) | Size | Ripple (mA,rms,at 105, 100KHz) |
|---|---|---|---|
| 200 (250) | 1.0 | 6.3x12 | 42 |
| 200 (250) | 1.5 | 6.3x12 | 54 |
| 200 (250) | 2.2 | 6.3x12 | 68 |
| 200 (250) | 3.3 | 6.3x12 | 78 |
| 200 (250) | 4.7 | 8x12 | 100 |
| 200 (250) | 5.6 | 8x12 | 125 |
| 200 (250) | 6.8 | 8x12 | 130 |
| 200 (250) | 10 | 10x13 | 300 |
| 200 (250) | 15 | 10x16 | 405 |
| 200 (250) | 22 | 10x16 | 480 |
| 200 (250) | 33 | 10x20 | 545 |
| 200 (250) | 47 | 10x25 | 680 |
| 200 (250) | 56 | 13x21 | 780 |
| 200 (250) | 68 | 13x25 | 925 |
| 200 (250) | 82 | 16x20 | 1000 |
| 200 (250) | 100 | 13x25 | 1120 |
| 200 (250) | 120 | 16x25 | 1200 |
| 200 (250) | 150 | 16x25 | 1470 |
| 200 (250) | 180 | 18x25 | 1570 |
| 200 (250) | 220 | 18x25 | 1900 |
| 250 (300) | 1.0 | 6.3x12 | 45 |
| 250 (300) | 1.5 | 6.3x12 | 57 |
| 250 (300) | 2.2 | 6.3x12 | 85 |
| 250 (300) | 3.3 | 8x12 | 78 |
| 250 (300) | 4.7 | 8x12 | 83 |
| 250 (300) | 5.6 | 8x12 | 102 |
| 250 (300) | 6.8 | 8x12 | 105 |
| 250 (300) | 10 | 10x13 | 310 |
| 250 (300) | 15 | 10x20 | 435 |
| 250 (300) | 22 | 10x20 | 530 |
| 250 (300) | 33 | 10x20 | 560 |
| 250 (300) | 47 | 13x21 | 730 |
| 250 (300) | 56 | 13x25 | 830 |
| 250 (300) | 68 | 13x25 | 900 |
| 250 (300) | 82 | 16x25 | 1100 |
| 250 (300) | 100 | 16x25 | 1150 |
| 250 (300) | 120 | 18x25 | 1380 |
| 250 (300) | 150 | 18x25 | 1450 |
| 250 (300) | 180 | 18x25 | 1560 |
| 250 (300) | 220 | 18x25 | 1900 |
| 350 (400) | 1.0 | 6.3x12 | 50 |
| 350 (400) | 1.5 | 8x12 | 75 |
| 350 (400) | 2.2 | 8x12 | 75 |
| 350 (400) | 3.3 | 8x12 | 90 |
| 350 (400) | 4.7 | 8x12 | 102 |
| 350 (400) | 5.6 | 8x16 | 128 |
| 350 (400) | 6.8 | 10x13 | 258 |
| 350 (400) | 10 | 10x16 | 330 |
| 350 (400) | 15 | 10x20 | 435 |
| 350 (400) | 22 | 13x21 | 525 |
| 350 (400) | 33 | 13x25 | 650 |
| 350 (400) | 47 | 16x25 | 835 |
| 350 (400) | 56 | 18x20 | 985 |
| 350 (400) | 68 | 18x25 | 1100 |
| 350 (400) | 82 | 18x30 | 1600 |
| 350 (400) | 100 | 18x30 | 1700 |
| 350 (400) | 120 | 18x25 | 1380 |
| 350 (400) | 150 | 18x25 | 1450 |
| 350 (400) | 180 | 18x30 | 1560 |
| 350 (400) | 220 | 18x25 | 1900 |
| 400 (450) | 1.0 | 8x12 | 68 |
| 400 (450) | 1.5 | 8x12 | 90 |
| 400 (450) | 2.2 | 8x12 | 95 |
| 400 (450) | 3.3 | 8x12 | 90 |
| 400 (450) | 4.7 | 8x12 | 205 |
| 400 (450) | 5.6 | 8x12 | 235 |
| 400 (450) | 6.8 | 10x13 | 280 |
| 400 (450) | 10 | 10x16 | 330 |
| 400 (450) | 15 | 13x21 | 420 |
| 400 (450) | 22 | 13x21 | 590 |
| 400 (450) | 33 | 13x21 | 600 |
| 400 (450) | 47 | 13x21 | 730 |
| 400 (450) | 56 | 13x25 | 830 |
| 400 (450) | 68 | 16x20 | 925 |
| 400 (450) | 82 | 16x25 | 1100 |
| 400 (450) | 100 | 18x25 | 1210 |
| 400 (450) | 120 | 18x25 | 1380 |
| 400 (450) | 150 | 18x25 | 1450 |
| 400 (450) | 180 | 18x30 | 1560 |
| 400 (450) | 220 | 18x25 | 1900 |
| 450 (500) | 1.0 | 6.3x12 | 50 |
| 450 (500) | 1.5 | 8x12 | 80 |
| 450 (500) | 2.2 | 8x12 | 80 |
| 450 (500) | 3.3 | 8x12 | 92 |
| 450 (500) | 4.7 | 10x13 | 130 |
| 450 (500) | 5.6 | 10x13 | 138 |
| 450 (500) | 6.8 | 10x13 | 152 |
| 450 (500) | 10 | 10x16 | 350 |
| 450 (500) | 15 | 10x20 | 435 |
| 450 (500) | 22 | 13x21 | 620 |
| 450 (500) | 33 | 13x25 | 660 |
| 450 (500) | 47 | 18x25 | 800 |
| 450 (500) | 56 | 18x30 | 1000 |
| 450 (500) | 68 | 18x32 | 1300 |
| 450 (500) | 82 | 18x35 | 1800 |
| 450 (500) | 100 | 18x35 | 2000 |
| 450 (500) | 120 | 18x25 | 1380 |
| 450 (500) | 150 | 18x25 | 1450 |
| 450 (500) | 180 | 18x30 | 1560 |
| 450 (500) | 220 | 18x25 | 1900 |
2507081835_Econd-10uF400V10x16FS_C49304967.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
