<
>
Specifications
Operating Temperature:
-25℃~+105℃
Lifetime:
3000hrs@105℃
Capacitance:
4.7uF
Height - Seated (Max):
11mm
Pin Spacing:
2mm
Voltage Rating:
100V
Diameter:
5mm
Ripple Current:
40mA@120Hz
Mfr. Part #:
4.7UF100VC110KM
Package:
Through Hole,D5xL11mm
Key Attributes
Model Number:
4.7UF100VC110KM
Product Description
Product Overview
This document details the specifications for the Hubei Milang Xingchuang Electronics Co., Ltd. KM Series Aluminum Electrolytic Capacitor. Designed for various electronic applications, these capacitors offer reliable performance with specific electrical and environmental characteristics.
Product Attributes
- Brand: MILANG XINGCHAUNG ELECTRONICS CO.,LTD
- Product Series: KM SERIES
- Origin: Hubei, China
- Material: Aluminum Electrolytic Capacitor
- Sleeve Color: Black with White PET (PET sleeve, black bottom, white lettering)
- Certifications: RoHS
Technical Specifications
| Part Number | Series | CAP.(uF) | WV(V) | SIZE (D x L) | Tolerance | D.F/120Hz | LC(uA)60s | 100KHz() | Life(Hrs) | R.C.mA 120Hz 105 | Surge Voltage | Sleeve | Working Temperature () |
| KM | KM | 4.7 | 100 | 5.0 X 11 | -20%+20% | 8 | 4.7 | - | 3000 | 40 | 125 | Black bottom white PET, long lead | -25+105 |
Dimensions (Unit: mm)
| D | L | F | d |
| 5.0 0.5 | 11.0 1.5 | 2.0 0.5 | 0.5 0.05 |
Marking Details
| Item | Description |
| 1 | Company Logo |
| 2 | Capacitance and Rated Voltage |
| 3 | Polarity bar |
| 4 | Product Series |
| 5 | Operating Temperature Range and Capacitance Tolerance |
| 6 | RoHS |
| 7 | Production Date (e.g., "2502" for Feb 2025) |
| 8 | Sleeve Material |
Ripple Current Multiplier
| Freq | CAP10 | 10CAP100 | 100CAP1000 | CAP1000 |
| 50Hz/60Hz | 0.80 | 0.80 | 0.80 | 0.80 |
| 120Hz | 1.00 | 1.00 | 1.00 | 1.00 |
| 1KHz | 1.45 | 1.36 | 1.25 | 1.17 |
| 10KHz | 1.65 | 1.48 | 1.35 | 1.25 |
| 50100KHz | 1.70 | 1.53 | 1.38 | 1.28 |
Ripple Current vs Temperature Multiplier
| Temperature() | 45 | 60 | 70 | 85 | 105 |
| Multiplier | 2.10 | 1.90 | 1.40 | 1.25 | 1.00 |
Test Items
| NO | Test Item | Conditions | Specifications |
| 1 | Maximum permissible ripple current | Temperature:1052, Voltage:DC.Voltage+peak ripple voltageRated voltage. Ripple frequency: 120Hz | Refer to table |
| 2 | Surge | Temperature:1052, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds. Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 3 | Temperature Cycle | One Cycle: Rated low category temperature3(303min), 25(3MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 4 | Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605. Solder bath composition: Sn-96.5%.Ag-3.0%.Cu-0.5%. Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 5 | Solder Ability | Solder bath temperature: 2355. Solder bath composition: Sn-96.5%. Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| 6 | Low Temperature Characteristics(Max. Impedance Ratio) | working Voltage (v) 6.3 to 100: Impedance Z(-40)/Z(+20). working Voltage (v) 160 to 450: Impedance Z(-25)/Z(+20) | See table |
| 7 | High Humidity Storage | Temperature:402, Relative humidity :90 to 95%. Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 8 | Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing |
| 9 | Terminal strengthTensile/winding intensity | Tensile test: Diameter of terminal(mm) 0.5d0.8 (10N), 0.8d1.25 (20N), continuedtime 101sec. Winding test: Diameter of terminal(mm) 0.5d0.8 (5N), 0.8d1.25 (10N). Awl quality 0.51kg/1.02kg | 1.No electrical or mechanical damage. 2.No appearance damage. |
| 10 | Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm. Cycle duration :1 minute. Duration :2 hours per direction (3 directions) | 1.No electrical or mechanical damage. 2.No appearance damage. |
| 11 | Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| 12 | Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Storage Conditions
Storage Temperature: 35
Storage Humidity: 75% RH
Shelf Life: One year (re-charge required after one year)
2504101957_Econd-4-7UF100VC110KM_C46867090.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
