<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
4.7uF
Height - Seated (Max):
11mm
Pin Spacing:
2mm
Voltage Rating:
50V
Diameter:
5mm
Equivalent Series Resistance(ESR):
2Ω
Tolerance:
±20%
Ripple Current:
58mA@100KHz
Mfr. Part #:
4.7UF50VC110GF
Package:
Through Hole,D5xL11mm
Key Attributes
Model Number:
4.7UF50VC110GF
Product Description
Product Overview
MILANG ELECTRONICS CO.,LTD GF series aluminum electrolytic capacitors offer reliable performance for various electronic applications. These capacitors are designed with specific electrical and physical characteristics to meet demanding requirements.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin:
- Product Type: Aluminum Electrolytic Capacitor
- Series: GF Series
- Color: Green sleeve with white lettering (PET)
- RoHS Compliant: Yes
Technical Specifications
| Part Number | Series | Capacitance (uF) | Rated Voltage (V) | Size (D x L) mm | Tolerance | Dissipation Factor (D.F.) @120Hz | Leakage Current (LC) uA (60s) | Impedance @100KHz () | Life (Hrs) | Ripple Current (R.C.) mA @100KHz | Surge Voltage (V) | Sleeve | Termination | Working Temperature (C) |
| GF 4.7 | GF | 4.7 | 50.0 | 5.0 X 11.0 | -20% ~ +20% | 8.0% | 3.0 | 2.0 | 3000 | 58.0 | 63.0 | Green PET with white lettering | Long lead | -40 to +105 |
Test Items
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature: 1052, Ripple frequency: 100KHz | Refer to table |
| Surge | Temperature: 1052, Applied voltage: see specification, Duration: 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Temperature Cycle | Rated high category temperature3 for 303 min, 25 for 3 MAX, Rated low category temperature3 for 303 min, 25 for 3 MAX. Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Solder bath temperature: 2605, Warm up time: 1202 seconds to reach 1202, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder. |
| Low Temperature Characteristics (Max. Impedance Ratio) | Working Voltage (V): 6.3 to 100 | Impedance Z-40/+20: 8 (for 6.3V), 6 (for 10V), 4 (for 16V), 3 (for 25V, 35V, 50V, 63V, 100V) |
| High Humidity Storage | Temperature: 402, Relative humidity: 90 to 95%, Duration: 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Vent | Capacitor diameter Less than 22.4mm, Applied current(A): 1, Minutes: within 30. Capacitor diameter More than 22.5mm, Applied current(A): 10, Minutes: 9. | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing. |
| Terminal strength: Tensile test intensity/winding intensity | Tensile test intensity: Diameter of terminal 0.5d0.8: 10N, 101sec; Diameter of terminal 0.8d1.25: 20N, 101sec. Winding intensity: Diameter of terminal 0.5d0.8: 5N, 0.51kg; Diameter of terminal 0.8d1.25: 10N, 1.02kg. | 1.No electrical or mechanical damage. 2.No appearance damage. |
| Vibration | Frequency range: 10 Hz to 55 Hz, Amplitude: 1.5 mm, Cycle duration: 1 minute, Duration: 2 hours per direction (3 directions) | 1.No electrical or mechanical damage. 2.No appearance damage. |
| Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Packing
| Type | Dimensions (L x W x H) |
| Bulk Packing Outer Box | 420 x 327 x 270 mm |
| Taped Packing Inner Box | 345 x 235 x 55 mm |
| Taped Packing Outer Box | 490 x 355 x 295 mm |
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Capacitor Storage Validity: One year (re-charging required after one year)
2504101957_Econd-4-7UF50VC110GF_C46867052.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
