<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
220uF
Height - Seated (Max):
13mm
Pin Spacing:
5mm
Voltage Rating:
50V
Diameter:
10mm
Equivalent Series Resistance(ESR):
65mΩ
Tolerance:
±20%
Ripple Current:
850mA@100KHz
Mfr. Part #:
220uF50V10x13GF
Package:
Through Hole,D10xL13mm
Key Attributes
Model Number:
220uF50V10x13GF
Product Description
Product Overview
MILANG ELECTRONICS CO.,LTD GF series aluminum electrolytic capacitors are designed for various electronic applications. These capacitors offer reliable performance with specifications including capacitance, voltage rating, size, tolerance, and low leakage current.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Series: GF
- Material: Aluminum Electrolytic Capacitor
- Sleeve: Green with white PET
- Processing: Long lead
- Certifications: RoHS
Technical Specifications
| Customer Part Number | Series | Capacitance (uF) | Rated Voltage (V) | Size (DxL mm) | Tolerance | DF/120Hz (%) | Leakage Current (uA) 60s | Impedance 100KHz () | Life (Hrs) | Ripple Current (mA) 100KHz | Surge Voltage (V) | Working Temperature (C) |
| GF 220UF50V 10X13 | GF | 220.0 | 50.0 | 10.0 X 13.0 | -20% ~ +20% | 8.0 | 110.0 | 0.065 | 2000 | 850.0 | 63.0 | -40 ~ +105 |
Test Items
| NO. | Test Item | Conditions | Specifications |
| 1 | Maximum permissible ripple current | Temperature:1052, Voltage :DC.Voltage+peak ripple voltage Rated voltage. Ripple frequency:100KHz | Refer to table |
| 2 | Surge | Temperature:1052, Applied voltage: see specification, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds. Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 3 | Temperature Cycle | One Cycle Rated high category temperature3 303, 25 3MAX, Rated low category temperature3 303, 25 3MAX Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 4 | Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605. Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5% Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 5 | Solder Ability | Solder bath temperature: 2355. Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5% Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| 6 | Low Temperature Characteristics (Max.Impedance Ratio) | working Voltage (v) 6.3 10 16 25 35 50 63 100 | Impedance Z-40/+20 8 6 4 3 3 3 3 3 |
| 7 | High Humidty storage | Temperature:402, Relative humidity :90 to 95% Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 8 | Vent | Conduct under normal lighting for lab work | There shall be no explosion,flash,flame,spark or fire from the capacitor during or after the test,nor shall there be expulsion of any metal from the casing |
| 9 | Terminal strength Tensile testintensity/winding intensity | Tensile testintensity: Diameter of terminal 0.5d0.8 10, 0.8d1.25 20, continued time 101sec. Winding intensity: Diameter of terminal 0.5d0.8 5 0.51kg, 0.8d1.25 10 1.02kg | 1.No electrical or mechanical damage 2.No appearance damage |
| 10 | Vibration | Frequency range : 10 Hz to 55 Hz Amplitude :1.5 mm Cycle definition:10Hz to 55 Hz and back to 10Hz Cycle duration : 1 minute. Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage. 2.No appearance damage |
| 11 | Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105.After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| 12 | Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage.After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Storage Conditions
Storage Temperature: ≤35°C
Storage Humidity: ≤75%RH
Capacitor Storage Validity: One year (Recharging required after one year)
2507111630_Econd-220uF50V10x13GF_C49332873.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
