<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
100uF
Height - Seated (Max):
17mm
Voltage Rating:
100V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
200mΩ
Ripple Current:
540mA@100KHz
Tolerance:
±20%
Mfr. Part #:
KM101M100G170B000
Package:
Through Hole,D10xL17mm
Key Attributes
Model Number:
KM101M100G170B000
Product Description
Product Overview
MILANG ELECTRONICS CO.,LTD offers GF series aluminum electrolytic capacitors. These capacitors are designed for various electronic applications and provide reliable performance.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin:
- Series: GF
- Color: Green sleeve with white lettering (PET)
- Certifications: RoHS
Technical Specifications
| Part Number | Series | Capacitance (uF) | Rated Voltage (V) | Size (D x L) mm | Tolerance | Dissipation Factor (D.F) /120Hz (%) | Leakage Current (LC) uA (60s) | ESR (100KHz) () | Life (Hrs) @105 | Ripple Current (mA) @100KHz | Surge Voltage (V) | Sleeve Material | Terminal Type | Working Temperature () |
| KM101M100G170B000 | GF | 100.0 | 100.0 | 10.0 X 17.0 | -20% ~ +20% | 8.0 | 100.0 | 0.2 | 3000 | 540.0 | 125.0 | PET | Long leads | -40 ~ +105 |
Dimensions
Unit: mm
D: 10.0 0.5
L: 17.0 1.5
F: 5.0 0.5
d: 0.6 0.05
Marking
1. Company Logo
2. Capacitance and Rated Voltage
3. Polarity bar
4. Product Series
5. Operating Temperature Range and Capacitance Tolerance
6. RoHS
7. Production Date (e.g., "2502" for Feb 2025)
8. Sleeve Material
Test Items
5.1 Test Items
| NO | Test Item | Conditions | Specifications |
| 1 | Maximum permissible ripple current | Temperature:1052, Voltage:DC.Voltage+peak ripple voltage Rated voltage, Ripple frequency:100KHz | Refer to table |
| 2 | Surge | Temperature:1052, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds, Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 3 | Temperature Cycle | One Cycle: Rated high category temperature3 (303 min), 25 (3MAX min), Rated low category temperature3 (303 min), 25 (3MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 4 | Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605, Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 5 | Solder Ability | Solder bath temperature: 2355, Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
5.2 Test Items
| NO | Test Item | Conditions | Specifications |
| 6 | Low Temperature Characteristics (Max.Impedance Ratio) | working Voltage (v) 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 |
| 7 | High Humidity storage | Temperature:402, Relative humidity :90 to 95%, Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 8 | Vent | Conduct under normal lighting for lab work | There shall be no explosion,flash,flame,spark or fire from the capacitor during or after the test,nor shall there be expulsion of any metal from the casing |
| 9 | Terminal strength Tensile test intensity/winding intensity | Tensile test intensity: Diameter of terminal 0.5d0.8 (10N, 101sec), 0.8d1.25 (20N, 101sec). Winding intensity: Diameter of terminal 0.5d0.8 (5N, 0.51kg), 0.8d1.25 (10N, 1.02kg) | 1.No electrical or mechanical damage 2.No appearance damage |
| 10 | Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm, Cycle definition:10Hz to 55 Hz and back to 10Hz, Cycle duration :1 minute, Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage. 2.No appearance damage |
| 11 | Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105.After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| 12 | Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage.After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Packing
6.1 Loose Packing
Outer box dimensions (L x W x H): 420 x 327 x 270mm
6.2 Taping Packing
Inner box dimensions (L x W x H): 345 x 235 x 55mm
Outer box dimensions (L x W x H): 490 x 355 x 295mm
Each outer box contains 10 inner boxes.
6.3 Cardboard Box Packing
Storage Conditions
Storage Temperature: 35
Storage Humidity: 75% RH
Shelf life: One year (re-charging required after one year)
2504101957_Econd-KM101M100G170B000_C46526961.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
