<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
220uF
Height - Seated (Max):
11mm
Pin Spacing:
2mm
Voltage Rating:
10V
Diameter:
5mm
Equivalent Series Resistance(ESR):
220mΩ
Tolerance:
±20%
Ripple Current:
300mA@100KHZ
Mfr. Part #:
220uF10V5x11GF
Package:
Through Hole,D5xL11mm
Key Attributes
Model Number:
220uF10V5x11GF
Product Description
Product Overview
MILANG ELECTRONICS CO.,LTD offers GF series aluminum electrolytic capacitors designed for various electronic applications. These capacitors provide reliable performance with specifications including capacitance, voltage rating, size, tolerance, and operating temperature.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Product Series: GF Series
- Material: Aluminum Electrolytic Capacitor
- Color: Green sleeve with white lettering (PET)
- Certifications: RoHS
- Packaging: Bulk (loose bag), Taped, and Boxed
- Storage Conditions: Temperature 35, Humidity 75% RH. Shelf life: 1 year (re-charging required after 1 year).
Technical Specifications
| Customer Part Number | Supplier PN | Series | Capacitance (uF) | Rated Voltage (V) | Size (D x L) mm | Tolerance | D.F. (120Hz) | Leakage Current (uA) 60s | Impedance (100KHz) | Life (Hrs) | Ripple Current (mA 100KHz) | Surge Voltage (V) | Sleeve | Working Temperature () |
| 220uF10V5x11GF | GF | 100.0 | 16.0 | 5.0 X 11.0 | -20% +20% | 10.0 | 16.0 | 0.22 | 3000 | 300.0 | 20.0 | Green PET, long leads | -40 to +105 |
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature:1052, Voltage :DC.Voltage+peak ripple voltage Rated voltage. Ripple frequency:100KHz | Refer to table |
| Surge | Temperature:1052, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds. Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Temperature Cycle | One Cycle: Rated high category temperature3 (303 min) 25 (3 MAX min) Rated low category temperature3 (303 min) 25 (3 MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202. Solder bath temperature: 2605. Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5%. Immersion depth: 1.5 to 2.0mm. Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355. Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5%. Immersion depth: 1.5 to 2.0mm. Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| Low Temperature Characteristics (Max.Impedance Ratio) | Working Voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 100. Impedance Z-40/+20 Ratio: 8, 6, 4, 3, 3, 3, 3, 3 | |
| High Humidity Storage | Temperature:402. Relative humidity :90 to 95%. Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing |
| Terminal strength: Tensile test intensity/winding intensity | Tensile test intensity: Diameter of terminal 0.5 0.8mm, Tensile Strength(N): 10, continued time 101sec. Diameter of terminal 0.8mm| 1.No electrical or mechanical damage 2.No appearance damage | |
| Vibration | Frequency range : 10 Hz to 55 Hz. Amplitude :1.5 mm. Cycle definition:10Hz to 55 Hz and back to 10Hz. Cycle duration : 1 minute. Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage. 2.No appearance damage |
| Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
2507081835_Econd-220uF10V5x11GF_C49304869.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
