<
>
Specifications
Lifetime:
5000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
1000uF
Height - Seated (Max):
17mm
Pin Spacing:
5mm
Voltage Rating:
16V
Diameter:
10mm
Equivalent Series Resistance(ESR):
60mΩ
Tolerance:
±20%
Ripple Current:
1.3A@100KHz
Mfr. Part #:
1000UF16VG170GL
Package:
Through Hole,D10xL17mm
Key Attributes
Model Number:
1000UF16VG170GL
Product Description
Product Overview
This document outlines the specifications for the MILANG ELECTRONICS CO.,LTD GL series aluminum electrolytic capacitors. These capacitors are designed for various electronic applications requiring stable performance and reliability.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Product Series: GL
- Certifications: RoHS
- Color: Green sleeve with white lettering
- Terminal Type: Long leads
- Processing Form: Long leads
Technical Specifications
| Part Number | Series | CAP (uF) | WV (V) | Size (D x L) | Tolerance | D.F/120Hz | LC (uA) 60s | Impedance 100KHz () | Life (Hrs) | R.C.mA 100K HZ 105 | Surge Voltage (V) | Working Temperature () |
| GL 1000UF16VG170GL | GL | 1000.0 | 16.0 | 10.0 X 17.0 | -20% ~ +20% | 10.0 | 160.0 | 0.06 | 5000 | 1300.0 | 20.0 | -40 ~ +105 |
Detailed Specifications
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature:1052, Ripple frequency:100KHz | Refer to table |
| Surge | Temperature:1052, Applied voltage: see specification, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds. Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Temperature Cycle | One Cycle: Rated high category temperature3 (303 min) to 25 (3MAX min), Rated low category temperature3 (303 min) to 25 (3MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605. Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355. Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| Low Temperature Characteristics (Max.Impedance Ratio) | Working Voltage (v): 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 |
| High Humidity Storage | Temperature:402, Relative humidity :90 to 95%, Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F. smaller than specification value. 4.Leakage current smaller than specification value. |
| Vent | Capacitor diameter Less than 22.4mm, Applied current(A) 1, Minutes within 30. Capacitor diameter More than 22.5mm, Applied current(A) 10, Minutes 9 | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing |
| Terminal strength: Tensile test intensity/winding intensity | Tensile test intensity: Diameter of terminal 0.5d0.8, Tensile Strength(n) 10, continued time 101sec. Diameter of terminal 0.8d1.25, Tensile Strength(n) 20, continued time 101sec. Winding intensity: Diameter of terminal 0.5d0.8, winding Strength(n) 5, Awl quality 0.51kg. Diameter of terminal 0.8d1.25, winding Strength(n) 10, Awl quality 1.02kg. | 1.No electrical or mechanical damage 2.No appearance damage |
| Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm, Cycle definition:10Hz to 55 Hz and back to 10Hz, Cycle duration :1 minute. Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage 2.No appearance damage |
| Endurance | Capacitors are placed in an oven and applied voltage for 5000 hours at 105.After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F. change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Packaging and Storage
Packing
- Bulk Packaging: Includes long and short lead packaging. Outer box dimensions: 420X327X270mm.
- Taped Packaging: Standard packaging. Each outer box contains 10 inner boxes. Inner box dimensions: 345X235X55mm. Outer box dimensions: 490X355X295mm.
- Box Packaging: (Details not fully specified in source)
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75RH%
- Shelf Life: One year (re-charging required after one year)
2504101957_Econd-1000UF16VG170GL_C46867113.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
