<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
100uF
Height - Seated (Max):
11mm
Pin Spacing:
2.5mm
Voltage Rating:
25V
Diameter:
6.3mm
Tolerance:
±20%
Ripple Current:
159mA@120Hz
Mfr. Part #:
100uF25V6.3x11KM
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
100uF25V6.3x11KM
Product Description
ALUMINUM ELECTROLYTIC CAPACITORS
Econd KM Series capacitors are designed for demanding applications in communication equipment, switching power supplies, and industrial measuring instruments. They offer a load life of 2000-3000 hours at 105 and comply with RoHS environmental requirements.
Product Attributes
- Brand: Econd
- Certifications: RoHS Compliant, JIS C-5141, JIS C-5102
Technical Specifications
| Item | Performance Characteristics | Range 1 | Range 2 |
| Operating Temp. Range | -40~+105 | -25~+105 | |
| Rated Voltage Range | 6.3 to 100 VDC | 160 to 450 VDC | |
| Capacitance Range | 0.47 to 22000 F | 0.47 to 470 F | |
| Capacitance Tolerance | (120Hz, 20) | 20% | |
| Leakage Current | (after 2 min. with rated voltage) | LC0.01CV or 3.0 (A) | LC0.03CV +40 (A) |
| Dissipation Factor (Tan) | (max, 120Hz, 20) | For capacitance >1000F, add 0.02 per another 1000F | |
| Low Temp. Characteristic (Max Impedance Ratio) | (120Hz) | For capacitance >1000F, add 0.5 per another 1000F for Z(-25)/Z(+20), add 1 per another 1000F for Z(-40)/Z(+20) | |
| Load Life Test Conditions | Duration | 5~6.3: 2000hrs, 10: 3000hrs | |
| Load Life Test Conditions | Ambient Temp. | +105 | |
| Load Life Test Conditions | Applied Voltage | Rated DC working voltage | |
| Load Life Test Conditions | After test requirements at +20 | Capacitance change: within 20% of initial. Dissipation factor: 200% of initial specified. Leakage current: initial specified. | |
| Shelf Life Test Conditions | Duration | 1000hrs | |
| Shelf Life Test Conditions | Ambient Temp. | +105 | |
| Shelf Life Test Conditions | Applied Voltage | None | |
| Shelf Life Test Conditions | After test requirements at +20 | Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. | |
2507081835_Econd-100uF25V6-3x11KM_C49304911.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
