<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-25℃~+105℃
Capacitance:
10uF
Height - Seated (Max):
16mm
Voltage Rating:
450V
Pin Spacing:
5mm
Diameter:
10mm
Ripple Current:
100mA@120Hz
Tolerance:
±20%
Mfr. Part #:
KM100M450G170B000
Package:
Through Hole,D10xL17mm
Key Attributes
Model Number:
KM100M450G170B000
Product Description
Product Overview
The Hubei Milang Xingchuang Electronics Co., Ltd. KM Series Aluminum Electrolytic Capacitor is designed for various electronic applications. This product offers reliable performance with specific electrical and physical characteristics detailed below.
Product Attributes
- Brand: MILANG XINGCHAUNG
- Origin: Hubei, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: KM
- Certifications: RoHS
- Color: Black with white lettering (sleeve)
Technical Specifications
| Part Number | Series | Capacitance (uF) | Rated Voltage (V) | Size (D x L mm) | Tolerance | Dissipation Factor (DF) / 120Hz | Leakage Current (uA) / 60s | Impedance / 100KHz () | Life (Hrs) | Ripple Current (mA) / 120Hz @ 105 | Surge Voltage | Sleeve | Working Temperature () |
| KM100M450G170B000 | KM | 10.0 | 450 | 10 x 17 | -20% ~ +20% | 20% | 17 | 135.0 | 2000 | 100 | 500 | Black PET sleeve with white lettering | -25 ~ +105 |
Test Items
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature: 1052, Voltage: DC.Voltage+peak ripple voltageRated voltage, Ripple frequency: 120Hz | Refer to table |
| Surge | Temperature: 1052, ON position: 30 seconds, OFF position: 5 minutes 30 seconds, Duration: 1000 cycles | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Temperature Cycle | One Cycle: Rated low category temperature3 (303 min), 25 (3 min MAX), Rated low category temperature3 (303 min), 25 (3 min MAX). Total number of cycles: 5 | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time: 1202 seconds to reach 1202, Solder bath temperature: 2605, Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355, Solder bath composition: Sn-96.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder. |
| Low Temperature Characteristics (Max. Impedance Ratio) | - | Z(-40)/Z(+20) for 6.3V to 100V: 8, 6, 4, 3, 3, 3, 3, 3. Z(-25)/Z(+20) for 160V to 450V: 3, 3, 4, 4, 6, 6, 8. |
| High Humidity Storage | Temperature: 402, Relative humidity: 90 to 95%, Duration: 2408 hours | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing. Applied current: 1A (for <22.4mm diameter), 10A (for >22.5mm diameter). Duration: within 30 minutes (for <22.4mm), 9 minutes (for >22.5mm). |
| Terminal strength: Tensile test / winding test | - | Tensile test: 0.5d0.8mm: 10N, 101sec. 0.8d1.25mm: 20N, 101sec. Winding test: 0.5d0.8mm: 5N, 0.51kg. 0.8d1.25mm: 10N, 1.02kg. 1. No electrical or mechanical damage. 2. No appearance damage. |
| Vibration | Frequency range: 10 Hz to 55 Hz, Amplitude: 1.5 mm, Cycle definition: 10Hz to 55 Hz and back to 10Hz, Cycle duration: 1 minute, Duration: 2 hours per direction (3 directions) | 1. No electrical or mechanical damage. 2. No appearance damage. |
| Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current within 200% of the specification value. |
Packing
Bulk Packaging: Includes long lead and short lead packaging. Outer box dimensions: 420x327x270mm.
Taped Packaging: Standard packaging. Each outer box contains 10 inner boxes. Inner box dimensions: 345x235x55mm. Outer box dimensions: 490x355x295mm.
Boxed Packaging: (Details not fully specified in source text).
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Shelf Life: One year (re-charging required after one year)
2504101957_Econd-KM100M450G170B000_C46526979.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
