<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-25℃~+105℃
Capacitance:
47uF
Height - Seated (Max):
11mm
Pin Spacing:
2.5mm
Voltage Rating:
50V
Diameter:
6.3mm
Ripple Current:
126mA@120Hz
Mfr. Part #:
47UF50VE110KM
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
47UF50VE110KM
Product Description
Product Overview
This document specifies the KM series aluminum electrolytic capacitors from Hubei Milang Xingchuang Electronics Co., Ltd. These capacitors are designed for various electronic applications, offering reliable performance and durability.
Product Attributes
- Brand: MILANG XINGCHAUNG
- Origin: Hubei, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: KM
- Color: Black sleeve with white lettering (PET)
- Certifications: RoHS
Technical Specifications
| Part Number | Series | Capacitance (uF) | Rated Voltage (WV) | Size (D x L) | Tolerance | Dissipation Factor (DF/120Hz) | Leakage Current (LC uA, 60s) | Impedance (100KHz, ) | Life (Hrs) | Ripple Current (R.C.mA, 120Hz, 105) | Surge Voltage | Sleeve | Working Temperature (C) |
| KM 47UF50VE110KM | KM | 47.0 | 50 | 6.3 x 11 | -20% ~ +20% | 10 | 23.5 | / | 2000 | 126 | / | Black PET | -25 ~ +105 |
Dimensions (Unit: mm)
| D | L | F | d |
| 6.3 0.5 | 11.0 1.5 | 2.5 0.5 | 0.5 0.05 |
Marking Details
| Item | Description |
| 1 | Company Logo |
| 2 | Capacitance and Rated Voltage |
| 3 | Polarity Bar |
| 4 | Product Series |
| 5 | Operating Temperature Range and Capacitance Tolerance |
| 6 | RoHS Environmental Mark |
| 7 | Production Date (YYMM) |
| 8 | Sleeve Material |
Test Items
| Test Item | Conditions | Specifications |
| Maximum Permissible Ripple Current | Temperature: 1052; Voltage: DC Voltage + Peak Ripple Voltage Rated Voltage; Ripple Frequency: 120Hz | Refer to table |
| Surge | Temperature: 1052; Applied Voltage: See specification; "ON" Position: 30 seconds; "OFF" Position: 5 minutes 30 seconds; Duration: 1000 cycles | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Temperature Cycle | One Cycle: Rated low category temperature3 (303 min), 25 (MAX 3 min) | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time: 1202 seconds to reach 1202; Solder bath temperature: 2605; Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355; Solder bath composition: Sn-96.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | A minimum of 95% of the immersed surface is to be coated with new solder. |
| Low Temperature Characteristics (Max. Impedance Ratio) | Working Voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 100; Impedance Z(-40)/Z(+20): 8, 6, 4, 3, 3, 3, 3, 3. Working Voltage (V): 160, 200, 250, 350, 400, 420, 450; Impedance Z(-25)/Z(+20): 3, 3, 4, 4, 6, 6, 8. | / |
| High Humidity Storage | Temperature: 402; Relative humidity: 90 to 95%; Duration: 2408 hours | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing. |
| Terminal Strength (Tensile/Bending) | Tensile Test Intensity: Diameter of terminal (mm): 0.5d0.8 (Tensile Strength: 10N, Continued time: 101sec); Diameter of terminal (mm): 0.8d1.25 (Tensile Strength: 20N, Continued time: 101sec). Bending Strength: Diameter of terminal (mm): 0.5d0.8 (Bending Strength: 5N, Awl quality: 0.51kg); Diameter of terminal (mm): 0.8d1.25 (Bending Strength: 10N, Awl quality: 1.02kg) | 1. No electrical or mechanical damage. 2. No appearance damage. |
| Vibration | Frequency range: 10 Hz to 55 Hz; Amplitude: 1.5 mm; Cycle definition: 10Hz to 55 Hz and back to 10Hz; Cycle duration: 1 minute; Duration: 2 hours per direction (3 directions) | 1. No electrical or mechanical damage. 2. No appearance damage. |
| Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current within 200% of the specification value. |
Packing
| Type | Description | Dimensions (L x W x H) |
| Bulk Packing | Outer Box | 420 x 327 x 270 mm |
| Taped Packing | Inner Box: 10 boxes per outer box; Outer Box | Inner Box: 345 x 235 x 55 mm; Outer Box: 490 x 355 x 295 mm |
| Carton Packing | / | / |
Storage Conditions
| Parameter | Specification |
| Storage Temperature | 35 |
| Storage Humidity | 75% RH |
| Shelf Life | One year (recharge required after one year) |
2504101957_Econd-47UF50VE110KM_C46867104.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
