<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
47uF
Height - Seated (Max):
11mm
Voltage Rating:
35V
Pin Spacing:
2.5mm
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
450mΩ
Tolerance:
±20%
Ripple Current:
300mA@100KHz
Mfr. Part #:
47UF35VE110GF
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
47UF35VE110GF
Product Description
Product Overview
This product is an aluminum electrolytic capacitor from the GF series, designed for various electronic applications. It offers stable performance and reliability.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Material: Aluminum Electrolytic Capacitor
- Color: Green sleeve with white lettering (PET)
- Certifications: RoHS
- Series: GF
Technical Specifications
| Part Number | Series | CAP(uF) | WV(V) | SIZE | Tolerance | D.F/120HZ | LC(uA)60s | 100KHz() | life(Hrs) | R.C.mA100K HZ105 | surge voltage | Sleeve | working temperature () |
| GF | GF | 47.0 | 35.0 | 5.0 X 11.0 | -20%+20% | 9.0 | 16.5 | 0.45 | 3000 | 300.0 | 44.0 | Green bottom white PET long foot | -40+105 |
Ripple Current Coefficient
| Freq | CAP10 | 10CAP100 | 100CAP1000 | CAP1000 |
| 50Hz/60Hz | 0.47 | 0.52 | 0.58 | 0.63 |
| 120Hz | 0.59 | 0.65 | 0.72 | 0.78 |
| 1KHz | 0.85 | 0.89 | 0.9 | 0.91 |
| 10KHz | 0.97 | 0.97 | 0.98 | 0.98 |
| 50100KHz | 1.00 | 1.00 | 1.00 | 1.00 |
Ripple Temperature Coefficient
| Temperature() | 45 | 60 | 70 | 85 | 105 |
| Multiplier | 2.10 | 1.90 | 1.65 | 1.40 | 1.00 |
Marking
| Item | Content |
| 1. | Logo |
| 2. | Capacitance and Rated Voltage |
| 3. | Polarity bar |
| 4. | Series |
| 5. | Operating Temperature Range and Capacitance Tolerance |
| 6. | RoHS |
| 7. | Production Date (e.g., "2502" for Feb 2025) |
| 8. | Sleeve Material |
Test Items
| NO | Test Item | Conditions | Specifications |
| 1 | Maximum permissible ripple current | Temperature:1052, Ripple frequency:100KHz, Voltage :DC.Voltage+peak ripple voltage Rated voltage. | Refer to table |
| 2 | Surge | Temperature:1052, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds. Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 3 | Temperature Cycle | One Cycle: Rated high category temperature3 (303 min), 25 (3 MAX min), Rated low category temperature3 (303 min), 25 (3 MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 4 | Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605. Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 5 | Solder Ability | Solder bath temperature: 2355. Immersion depth: 1.5 to 2.0mm Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| 6 | Low Temperature Characteristics (Max.Impedance Ratio) | working Voltage (v): 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 |
| 7 | High Humidity storage | Temperature:402, Relative humidity :90 to 95%, Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| 8 | Vent | Conduct under normal lighting for lab work | There shall be no explosion,flash,flame,spark or fire from the capacitor during or after the test,nor shall there be expulsion of any metal from the casing |
| 9 | Terminal strength (Tensile/Bending) | Tensile test: Applied current(A): 1, Minutes within 30. Bending test: 2 bends (180 degrees). | 1.No electrical or mechanical damage 2.No appearance damage |
| 10 | Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm, Cycle duration :1 minute. Duration :2 hours per direction (3 directions) | 1.No electrical or mechanical damage 2.No appearance damage |
| 11 | Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| 12 | Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Packing
| Type | Description | Dimensions (L x W x H) |
| Bulk Packing | Outer Box | 420X327X270mm |
| Taped Packing | Inner Box | 345X235X55mm |
| Outer Box | 490X355X295mm | |
| Box Packing | N/A | N/A |
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Shelf Life: One year (recharge required after one year)
2504101957_Econd-47UF35VE110GF_C46867111.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
