<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
100uF
Height - Seated (Max):
11mm
Voltage Rating:
25V
Pin Spacing:
2.5mm
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
170mΩ
Ripple Current:
550mA@100KHz
Tolerance:
±20%
Mfr. Part #:
100UF25VE110GF
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
100UF25VE110GF
Product Description
Product Overview
This product is an aluminum electrolytic capacitor from the GF series, designed for various electronic applications. It offers specific electrical characteristics and is manufactured by Hubei Milan Xingchuang Electronics Co., Ltd.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Series: GF
- Certifications: RoHS
- Color: Green sleeve with white lettering
Technical Specifications
| Customer Part Number | Supplier PN | Series | CAP (uF) | WV (V) | Size (D x L) mm | Tolerance | D.F/120Hz (%) | LC (uA) 60s | Impedance 100KHz () | Life (Hrs) | Ripple Current mA (100KHz, 105) | Surge Voltage (V) | Sleeve | Working Temperature () |
| GF 100UF25V | 100UF25VE110GF | GF | 100.0 | 25.0 | 6.3 X 11.0 | -20% ~ +20% | 10.0 | 25.0 | 0.22 | 3000 | 350.0 | 32.0 | Green PET, long leads | -40 ~ +105 |
Test Items
| Test Item No. | Item | Conditions | Specifications |
| 1 | Maximum permissible ripple current | Temperature: 1052; Voltage: DC Voltage + peak ripple voltage Rated voltage; Ripple frequency: 100KHz | Refer to table |
| 2 | Surge | Temperature: 1052; Applied voltage: see specification; "ON" position: 30 seconds; "OFF" position: 5 minutes 30 seconds; Duration: 1000 cycles | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| 3 | Temperature Cycle | One Cycle: Rated high category temperature 3 (303 min), 25 (3 MAX min); Rated low category temperature 3 (303 min), 25 (3 MAX min). Total number of cycles: 5 | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| 4 | Resistance to Soldering Heat | Warm up time: 1202 seconds to reach 1202; Solder bath temperature: 2605; Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| 5 | Solder Ability | Solder bath temperature: 2355; Solder bath composition: Sn-96.5%, Ag-3.0%, Cu-0.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | A minimum of 95% of the immersed surface is to be coated with the new solder. |
| 6 | Low Temperature Characteristics (Max. Impedance Ratio) | Working Voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 |
| 7 | High Humidity Storage | Temperature: 402; Relative humidity: 90 to 95%; Duration: 2408 hours | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| 8 | Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing. |
| 9 | Terminal strength: Tensile test/winding intensity | Tensile test intensity: Diameter of terminal, Tensile Strength (N), Continued time (101sec); Winding intensity: Diameter of terminal, Winding Strength (N), Awl quality | 1. No electrical or mechanical damage. 2. No appearance damage. |
| 10 | Vibration | Frequency range: 10 Hz to 55 Hz; Amplitude: 1.5 mm; Cycle definition: 10Hz to 55 Hz and back to 10Hz; Cycle duration: 1 minute; Duration: 2 hours per direction (3 directions) | 1. No electrical or mechanical damage. 2. No appearance damage. |
| 11 | Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current smaller than specification value. |
| 12 | Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current within 200% of the specification value. |
Packing
Loose Packing: Includes long and short lead packaging. Outer carton dimensions: 420X327X270mm.
Taped Packing: Standard packaging. Each outer box contains 10 inner boxes. Inner box dimensions: 345X235X55mm. Outer box dimensions: 490X355X295mm.
Box Packing: (Details not fully specified in source text).
Storage Conditions
Storage Temperature: 35
Storage Humidity: 75% RH
Shelf Life: One year (re-charging required after one year).
2504101957_Econd-100UF25VE110GF_C46867074.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
