<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
220uF
Height - Seated (Max):
5.4mm
Voltage Rating:
10V
Diameter:
6.3mm
Ripple Current:
95mA@120Hz
Tolerance:
±20%
Mfr. Part #:
220UF10V6.3x5.4VT
Package:
SMD,D6.3xL5.4mm
Key Attributes
Model Number:
220UF10V6.3x5.4VT
Product Description
Product Overview
MILANG XINGCHUANG ELECTRONICS CO.,LTD offers V-Chip Type E-CAP, specifically the VT Series electrolytic capacitors. These capacitors are designed for various electronic applications requiring reliable performance and specific electrical characteristics. The product is characterized by its V-Chip type construction and comes with detailed specifications for electrical parameters, environmental testing, and material composition.
Product Attributes
- Brand: MILANG XINGCHUANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Product Type: V-Chip Type E-CAP, ELECTROLYTIC CAPACITOR
- Series: VT SERIES
- Approval Sheet Form Number: QA-09
- Email: miran-electronics@126.com
Technical Specifications
| Part Number | Series | CAP.(uF) | WV(V) | SIZE | Tolerance | D.F/120HZ | LC(uA)60s | Z105 100KHz() | life(Hrs) | R.C.mA 120H Z105 | surge voltage | working temperature () | remark |
| VT220UF10V | VT | 220 | 10 | 6.3 X 5.4 | -20%+20% | 24 | 22 | N/A | 2000 | 95 | 13 | -40+105 |
| Frequency | Multiplier for ripple current (4-10, 0.1-68F) | Multiplier for ripple current (4-10, 100-3300F) | Multiplier for ripple current (12.5-18, ~68F) | Multiplier for ripple current (12.5-18, 100-680F) | Multiplier for ripple current (12.5-18, 1000-6800F) |
| 50Hz | 0.70 | 0.85 | 0.75 | 0.80 | 0.85 |
| 120Hz | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| 300Hz | 1.17 | 1.08 | 1.35 | 1.23 | 1.10 |
| 1KHz | 1.36 | 1.20 | 1.57 | 1.34 | 1.13 |
| 10KHz | 1.50 | 1.30 | 2.00 | 1.50 | 1.15 |
| Temperature Coefficient Item | 40 | 55 | 70 | 85 | 105 |
| Coefficient | 2.7 | 2.5 | 2.0 | 1.7 | 1.0 |
| Rated Voltage | 4-10 Z(-25)/Z(20) | 4-10 Z(-40)/Z(20) | 12.5-18 Z(-25)/Z(20) | 12.5-18 Z(-40)/Z(20) |
| 4 | 7.0 | 15.0 | 7.0 | 17.0 |
| 6.3 | 4.0 | 8.0 | 5.0 | 12.0 |
| 10 | 3.0 | 6.0 | 4.0 | 10.0 |
| 16 | 2.0 | 4.0 | 3.0 | 8.0 |
| 25 | 2.0 | 4.0 | 2.0 | 5.0 |
| 35 | 2.0 | 3.0 | 2.0 | 4.0 |
| 50-63 | 2.0 | 3.0 | 2.0 | 3.0 |
| 100 | 3.0 | 4.0 | 2.0 | 3.0 |
| 160-250 | 2.0 | 3.0 | 2.0 | 6.0 |
| 350-450 | 3.0 | 6.0 | 4.0 | 10.0 |
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature:1052, Voltage:DC.Voltage+peak ripple voltage Rated voltage. Ripple frequency: 120Hz | Refer to table |
| Surge | Temperature:1052, Applied voltage: see specification, "ON" position : 30 seconds "OFF" position :5 minutes, Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| Temperature Cycle | One Cycle Temperature() Time (minutes): Rated low category temperature3 303, 25 3MAX. Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202, Solder bath temperature: 2605. Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355. Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5%, Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| Low Temperature Charcteriestics (Max.Impedance Ratio) | ||
| High Humidty storage | Temperature:402, Relative humidity :90 to 95%, Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| Vent Conduct | Capacitor diameter, Applied current(A) Minutes: Less than 22.4mm 1 within 30, More than 22.5mm 10 9 | There shall be no explosion,flash,flame,spark or fire from the capacitor during or after the test,nor shall there be expulsion of any metal from the casing |
| Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm, Cycle definition:10Hz to 55 Hz and baCK to 10H2, Cycle duration :1 minute, Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage. 2.No appearance damage |
| Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105.After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage.After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
2504281715_Econd-220UF10V6-3x5-4VT_C48587227.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
