<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
680uF
Height - Seated (Max):
13mm
Pin Spacing:
2.5mm
Voltage Rating:
10V
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
110mΩ
Ripple Current:
620mA@100KHz
Tolerance:
±20%
Mfr. Part #:
680UF10VE130GF
Package:
Through Hole,D6.3xL13mm
Key Attributes
Model Number:
680UF10VE130GF
Product Description
Product Overview
This document outlines the specifications for the MILANG ELECTRONICS CO.,LTD GF Series Aluminum Electrolytic Capacitor. Designed for various electronic applications, these capacitors offer reliable performance with specific electrical and physical characteristics detailed below.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: GF Series
- Certifications: RoHS
- Color: Green sleeve with white lettering (PET)
- Terminal Type: Long leads
- Processing: Through-hole
Technical Specifications
| Customer Part Number | Series | Capacitance (uF) | Rated Voltage (V) | Size (D x L) mm | Tolerance | Dissipation Factor (D.F.) / 120Hz | Leakage Current (LC) uA (60s) | Impedance () @ 100KHz | Life (Hrs) @ 105 | Ripple Current (R.C.) mA @ 100KHz | Surge Voltage (V) | Working Temperature (C) |
| GF 680UF10VE130GF | GF | 680.0 | 10.0 | 6.3 X 13.0 | -20% ~ +20% | 12.0% | 68.0 | 0.11 | 3000 | 620.0 | 13.0 | -40 to +105 |
Dimensions (Unit: mm)
| Symbol | Dimension | Tolerance |
| D | 6.3 | 0.5 |
| L | 13.0 | 1.5 |
| F | 2.5 | 0.5 |
| d | 0.5 | 0.05 |
Marking Diagram
Item | Description
1. Logo
2. Capacitance and Rated Voltage
3. Polarity bar
4. Series
5. Operating Temperature Range and Capacitance Tolerance
6. RoHS
7. Production Date (YYMM)
8. Sleeve Material
Testing Conditions
| Test Item | Conditions | Specifications |
| Maximum Permissible Ripple Current | Temperature: 1052, Voltage: DC Voltage + peak ripple voltage Rated voltage, Ripple frequency: 100KHz | Refer to table |
| Surge | Temperature: 1052, Applied voltage: see specification, Duration: 1000 cycles | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Temperature Cycle | One Cycle: Rated high category temperature 3 (303 min), 25 (3 MAX min), Rated low category temperature 3 (303 min), 25 (3 MAX min). Total number of cycles: 5 | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Warm up time: 1202 seconds to reach 1202, Solder bath temperature: 2605 (Sn-96.5%, Ag-3.0%, Cu-0.5%), Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | 1. No appearance defect. 2. Capacitance change within 5%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355 (Sn-96.5%, Ag-3.0%, Cu-0.5%), Immersion depth: 1.5 to 2.0mm, Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder. |
| Low Temperature Characteristics (Max. Impedance Ratio) | Working Voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 |
| High Humidity Storage | Temperature: 402, Relative humidity: 90 to 95%, Duration: 2408 hours | 1. No electrical or mechanical damage. 2. Capacitance change within 15%. 3. D.F. smaller than specification value. 4. Leakage current smaller than specification value. |
| Vent (Explosion Proof) | Applied current (A): 1 (for <22.4mm diameter), 10 (for >22.5mm diameter) | No explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing. |
| Terminal Strength (Tensile/Bending) | Tensile test: Diameter of terminal (d) 0.5d0.8 (Tensile Strength: 10N, 101sec); 0.8d1.25 (Tensile Strength: 20N, 101sec). Bending test: Diameter of terminal (d) 0.5d0.8 (Bending Strength: 5N, 0.51kg), 0.8d1.25 (Bending Strength: 10N, 1.02kg) | 1. No electrical or mechanical damage. 2. No appearance damage. |
| Vibration | Frequency range: 10 Hz to 55 Hz, Amplitude: 1.5 mm, Cycle definition: 10Hz to 55 Hz and back to 10Hz, Cycle duration: 1 minute, Duration: 2 hours per direction (3 directions) | 1. No electrical or mechanical damage. 2. No appearance damage. |
| Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1. Capacitance change within 20% of the initial value. 2. D.F. change within 200% of the specified value. 3. Leakage current within 200% of the specification value. |
Packing
Bulk Packing:
Bag Size Diagram (Top)
Outer Box Size Diagram (Top)
Outer Box Dimensions (L x W x H): 420 x 327 x 270mm
Taped Packing:
Standard packaging: 10 boxes per outer box.
Inner Box Dimensions (L x W x H): 345 x 235 x 55mm
Outer Box Dimensions (L x W x H): 490 x 355 x 295mm
Reel Packing:
(No specific details provided in source)
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Capacitor Storage Validity: One year (re-charging required after one year)
2504101957_Econd-680UF10VE130GF_C46867097.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
