<
>
Specifications
Voltage Rating:
100V
Capacitance:
100uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
5mm
Height - Seated (Max):
13mm
Equivalent Series Resistance(ESR):
40mΩ
Ripple Current:
3.2A@100kHz
Operating Temperature:
-55℃~+105℃
Diameter:
10mm
Mfr. Part #:
PH101M100G130B000
Package:
Through Hole,D10xL13mm
Key Attributes
Model Number:
PH101M100G130B000
Product Description
Product Overview
High-performance solid-state electrolytic capacitors from Hubei Milangxingchuang Electronics Co., Ltd., designed for demanding applications. These PH series capacitors offer stable performance, excellent durability, and compliance with international standards.
Product Attributes
- Brand: Milangxingchuang
- Origin: Hubei, China
- Material: High-purity aluminum foil, organic fiber separator, aluminum case
- Certifications: ROHS 2.0, REACH, HF compliant
- Sleeve Color: Red
Technical Specifications
| Item | Specification | Value |
| Product Name | Solid Electrolytic Capacitor | PH 100uF100V 10x13 |
| Customer P/N | PH101M100G130B000 | |
| Vendor P/N | ||
| Issue Date | 2025/9/5 | |
| Dimensions (mm) | D | 10 0.5 |
| L | 13 1.0 | |
| F | 5.0 0.5 | |
| d | 0.6 0.05 | |
| Series | PH | |
| Capacitance | 100.0 uF | |
| Rated Voltage | 100 V | |
| Capacitance Tolerance | -20% ~ +20% | |
| Dissipation Factor (DF) max | 10 % (120Hz) | |
| Leakage Current (LC) max | 2000.0 uA (60s) | |
| Equivalent Series Resistance (ESR) max | 40 m (100KHz) | |
| Ripple Current (R.C) max | 3200 mA (100KHz) | |
| Surge Voltage (SV) | 115.0 V | |
| Load Life | 2000 Hrs | |
| Operating Temperature | -55 ~ +105 | |
| Execution Standard | JISC 5101-4 | |
| Test Environment | Temperature: 202, Humidity: 65%5% |
Ripple Current Multipliers
| Frequency | Multipliers |
| 120F1K | 0.05 |
| 1KF10K | 0.30 |
| 10KF100K | 0.70 |
| 100KF500K | 1.0 |
Marking
| Item | Description |
| Rated Voltage | |
| Capacitance | |
| Series | |
| Polarity bar | |
| Sleeve Color |
Material Table
| NO. | Component | Material |
| Al Foil(+) | high pure aluminum formation foil | |
| Al Foil(-) | high pure aluminum carbon foil | |
| Leader pin | AlSn | |
| Separator | Cellulose | |
| Rubber | Organic compounds | |
| Case | AluminumCoated aluminum can |
Test Items Summary
| NO. | Item | Conditions | Decision | |
| 1 | Capacitance | Test Frequency: 120Hz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202 | See Table 2 | |
| 2 | Dissipation Factor | Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202 | See Table 2 | |
| 3 | Equivalent Series Resistance (ESR) | Test Frequency: 100KHz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202 | See Table 2 | |
| 4 | Leakage Current | Test Voltage: 100 V, Charging Time: 2min, Test Temperature: 202 | I0.2CVor 300A (Which is greater) | |
| 5 | Resistance to Soldering Heat | Warm up time: 1202 seconds, Solder bath temperature: 2605, Solder composition: H60A. H60S or H63A, Immersion depth: 1.5~2.0mm, Immersion duration: 101 seconds | a. No appearance defect. b. Capacitance change within 10%. c. DF smaller than specification. d. ESR smaller than specification. e. Leakage current smaller than specification. | |
| 6 | Solder Ability | Solder bath temperature: 2452, Solder composition: H60A. H60S or H63A, Immersion depth: 1.5~2.0mm, Immersion duration: 20.5seconds | Solder alloy shall cover 95% or more of the dipped lead's area. | |
| 7 | Damp heat | Temperature: 602, Relative humidity: 90% to 95%, Duration: 2408 hours | a. No electrical or mechanical damage. b. Capacitance change within 20%. c. DF smaller than 150% of specification. d. Leakage current smaller than specification. | |
| 8 | Surge Voltage | Test Temp: 15~35 , Apply surge voltage for 30 seconds and discharge for 330 seconds, Repeat 1000 times. | a. CAP change: within 10%. b. DF: Specified value. c. Leakage current: Specified value. d. Appearance: No visible damage. | |
| 9 | Vibration | Frequency range: 10 Hz to 55 Hz, Amplitude: 0.75 mm, Total duration: 3 2h (X-Y-Z directions each for 2 hours) | a. Appearance: No visible damage or leakage. b. Capacitance change: within 5% of initial value. | |
| 10 | Terminal strength | (A) Tensile strength, (B) Bending strength | Various load conditions based on lead diameter. | a. Capacitor shall withstand specified force without electrical or mechanical damage. b. No mechanical damage like terminal damage. |
| 11 | Load Life | Test Temp: 105 2, Rated Voltage: 100 V, Test Time: 2000 (+72 -0) hours (after 16 hours at room temp) | a. No appearance defect. b. Capacitance change within 20%. c. DF smaller than 200% of specification. d. Leakage current smaller than specification. | |
| 12 | Shelf Life | Test Temp: 105 2, Test Time: 1000 (+72 -0) hours (after 16 hours at room temp) | ||
| 13 | Maximum Applicable Ripple Current | At 100KHz or 120Hz, 105 2. Peak voltage not to exceed rated D.C voltage. | ||
| 14 | Low temperature test | Steps at 202 and minimum operating temperature for 722 hours. | a. CAP change: within 10%. b. DF: Specified value. c. LC: Specified value. d. ESR: Specified value. | |
| 15 | Rapid change of temperature | Cycles involving minimum and maximum operating temperatures with 30min dwell times. | a. CAP change: within 20%. b. DF: Specified value. c. LC: Specified value. | |
| 16 | Flow soldering test | Preheating 120 <120s, Soldering 260 10s (2 times). | a. If two reflow solders, time should be 10 seconds or less. b. Capacitance change: Within 10% of initial value. c. DF, LC, ESR: Less than or equal to the specified value. |
2509221615_Econd-PH101M100G130B000_C51953323.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
