<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
470uF
Height - Seated (Max):
40mm
Pin Spacing:
10mm
Voltage Rating:
450V
Diameter:
35mm
Ripple Current:
2.1A@120Hz
Tolerance:
±20%
Mfr. Part #:
470UF450V35x40HP
Package:
Through Hole,D35xL40mm
Key Attributes
Model Number:
470UF450V35x40HP
Product Description
Product Overview
The MILANG XINGCHUANG HP Series is a range of aluminum electrolytic capacitors designed for various electronic applications. These capacitors offer reliable performance and are manufactured by Hubei Milang Xingchuang Electronics Co., Ltd. They are suitable for use in circuits where polarity is important and provide stable capacitance and voltage ratings.
Product Attributes
- Brand: MILANG XINGCHUANG
- Origin: Hubei, China
- Material: Aluminum Electrolytic
- Color: Black sleeve with white lettering (PET)
- Certifications: RoHS
Technical Specifications
| Supplier PN | Series | CAP. (uF) | WV (V) | Size (D x L) | Tolerance | D.F./120Hz | LC (uA) 5min | R.C.A 120Hz () | Life (Hrs) | Working Temperature () | Sleeve |
| 470UF450V35x40HP | HP | 470.0 | 450 | 35 X 40 | -20% ~ +20% | 17 | 1380 | 2.1 | 2000 | -40 to +105 | Black PET |
Ripple Current Multiplier
| Freq | 10-100V | 160-500V |
| 50Hz/60Hz | 0.90 | 0.80 |
| 120Hz | 1.00 | 1.00 |
| 1KHz | 1.15 | 1.3 |
| 10KHz | 1.25 | 1.41 |
| 50KHz | 1.35 | 1.43 |
Test Items
| NO. | Test Item | Conditions | Specifications |
| 1 | Maximum permissible ripple current | Temperature:1052; Voltage:DC Voltage+peak ripple voltageRated voltage; Ripple frequency:120Hz | Refer to table |
| 2 | Surge | Temperature:1052; Applied voltage: see specification; "ON" position : 30 seconds; "OFF" position :5 minutes; Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 3 | Temperature Cycle | One Cycle Temperature(): Rated high category temperature3 (303), 25 (3MAX); Rated low category temperature3 (303), 25 (3MAX); Time (minutes): 303 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 4 | Resistance to Soldering Heat | Warm up time :1202 seconds to reach 1202; Solder bath temperature: 2605; Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 5 | Solder Ability | Solder bath temperature: 2355; Solder bath composition: Sn-96.5%. Ag-3.0% Cu-0.5%; Immersion depth: 1.5 to 2.0mm; Immersion duration: 101 seconds | A minimum of 95% the immersed surface is to be coated with the new solder |
| 6 | Low Temperature Characteristics (Max. Impedance Ratio) | working Voltage (v) | Impedance Z(-40)/Z(+20) |
| 10, 16, 25, 35, 50, 63, 100 | 8, 6, 4, 3, 3, 3, 3 | ||
| working Voltage (v) | Impedance Z(-25)/Z(+20) | ||
| 160, 200, 250, 350, 400, 420, 450 | 3, 3, 4, 4, 6, 6, 8, 7 | ||
| 7 | High Humidity Storage | Temperature:402; Relative humidity:90 to 95%; Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| 8 | Vent | Capacitor diameter; Applied current(A); Minutes | Less than 22.4mm: 1A within 30 min; More than 22.5mm: 10A within 9 min |
| 9 | Terminal strength tensile strength | Time(s); Diameter(mm); Load(kg) | 101; 0.5; 0.5 |
| Time(s); Diameter(mm); Load(kg) | 1.No electrical or mechanical damage 2.No appearance damage | ||
| 0.6 to 0.8; 1; 2 | |||
| 10 | Vibration | Frequency range : 10 Hz to 55 Hz; Amplitude :1.5 mm; Cycle definition:10Hz to 55 Hz and back to 10Hz; Cycle duration :1 minute; Duration :2 hours per direction (3directions) | 1.No electrical or mechanical damage 2.No appearance damage |
| 11 | Endurance | Capacitors are placed in an oven and applied voltage for 2000 hours at 105.After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| 12 | Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage.After being restored to 25, capacitors shall meet the specifications | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
2504211840_Econd-470UF450V35x40HP_C48227941.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
