<
>
Specifications
Lifetime:
3000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
680uF
Height - Seated (Max):
16mm
Voltage Rating:
35V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
50mΩ
Tolerance:
±20%
Ripple Current:
1.3A@100KHz
Mfr. Part #:
680UF35VG160GF
Package:
Through Hole,D10xL16mm
Key Attributes
Model Number:
680UF35VG160GF
Product Description
Product Overview
This document outlines the specifications for the MILANG ELECTRONICS CO.,LTD GF Series Aluminum Electrolytic Capacitor. Designed for various electronic applications, these capacitors offer reliable performance and durability.
Product Attributes
- Brand: MILANG ELECTRONICS CO.,LTD
- Origin: Hubei, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: GF Series
- Color: Green sleeve with white lettering (PET)
- Certifications: RoHS
Technical Specifications
| Supplier PN | Part Number | Series | CAP(uF) | WV(V) | SIZE | Tolerance/120HZ | D.F/120HZ | LC(uA)60s | R.C.mA100K HZ105 | surge voltage | Sleeve | working temperature () | Life(Hrs) | Impedance 100KHz() |
| 680UF35VG160GF | GF | GF | 680.0 | 35.0 | 10.0 X 16.0 | -20%20% | 9.0 | 238.0 | 1300.0 | 44.0 | Green PET | -40+105 | 3000 | 0.05 |
Testing Conditions and Specifications
| Test Item | Conditions | Specifications |
| Maximum permissible ripple current | Temperature:1052, Ripple frequency:100KHz, Voltage :DC.Voltage+peak ripple voltage Rated voltage. | Refer to table |
| Surge | Temperature:1052, Applied voltage: see specification, "ON" position : 30 seconds, "OFF" position :5 minutes 30 seconds. Duration 1000 cycles | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| Temperature Cycle | One Cycle: Rated high category temperature3 (303 min), 25 (3MAX min); Rated low category temperature3 (303 min), 25 (3MAX min). Total number of cycles: 5 | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| Resistance to Soldering Heat | Solder bath temperature: 2605. Composition: Sn-96.5%, Ag-3.0%, Cu-0.5%. Immersion depth: 1.5 to 2.0mm. Immersion duration: 101 seconds. Warm up time :1202 seconds to reach 1202. | 1.No appearance defect. 2.Capacitance change within 5% 3.D.F.smaller than specification value. 4.Leakage current smaller than specification value. |
| Solder Ability | Solder bath temperature: 2355. Composition: Sn-96.5%, Ag-3.0%, Cu-0.5%. Immersion depth: 1.5 to 2.0mm. Immersion duration: 101 seconds. | A minimum of 95% the immersed surface is to be coated with the new solder. |
| Low Temperature Characteristics (Max.Impedance Ratio) | working Voltage (v): 6.3, 10, 16, 25, 35, 50, 63, 100 | Impedance Z-40/+20: 8, 6, 4, 3, 3, 3, 3, 3 |
| High Humidity Storage | Temperature:402, Relative humidity :90 to 95%, Duration 2408 hours | 1.No electrical or mechanical damage. 2.Capacitance change within 15%. 3.D.F.smaller than specification volue. 4.Leakage current smaller than specification volue. |
| Vent | Conduct under normal lighting for lab work | There shall be no explosion, flash, flame, spark or fire from the capacitor during or after the test, nor shall there be expulsion of any metal from the casing. |
| Terminal strength: Tensile test intensity/winding intensity | Tensile test intensity: Diameter of terminal 0.5d0.8, Tensile Strength(N) 10, continued time 101sec; Diameter of terminal 0.8d1.25, Tensile Strength(N) 20, continued time 101sec. Winding strength: Diameter of terminal 0.5d0.8, winding Strength(N) 5, Awl quality 0.51kg; Diameter of terminal 0.8d1.25, winding Strength(N) 10, Awl quality 1.02kg. | 1.No electrical or mechanical damage. 2.No appearance damage. |
| Vibration | Frequency range : 10 Hz to 55 Hz, Amplitude :1.5 mm, Cycle definition:10Hz to 55 Hz and back to 10Hz, Cycle duration :1 minute. Duration :2 hours per direction (3 directions) | 1.No electrical or mechanical damage. 2.No appearance damage. |
| Endurance | Capacitors are placed in an oven and applied voltage for 3000 hours at 105. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current smaller than specification value. |
| Shelf Life | Capacitors are placed in an oven for 1000 hours at 105 without applying rated working voltage. After being restored to 25, capacitors shall meet the specifications. | 1.Capacitance change within 20% of the initial value. 2.D.F.change within 200% of the specified value. 3.Leakage current within 200% of the specification value. |
Packaging and Storage
Packing
- Loose Packing: Includes long lead and short lead packaging. Outer carton dimensions: 420X327X270mm.
- Taped Packaging: Standard packaging. 10 boxes per outer carton. Inner box dimensions: 345X235X55mm. Outer carton dimensions: 490X355X295mm.
- Reel Packaging: (Details not specified in source text)
Storage Conditions
- Storage Temperature: 35
- Storage Humidity: 75% RH
- Shelf Life: One year (recharge required after one year)
2504101957_Econd-680UF35VG160GF_C46867085.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
