<
>
Specifications
Mfr. Part #:
MPE222J3AM040K200ZR
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
MPE222J3AM040K200ZR
Product Description
Product Overview
The CL21/MPE series capacitors are epoxy-encapsulated, metallized polyester film capacitors designed for use in electronic equipment. They feature a non-inductive winding structure and are suitable for DC, pulse, and switching circuits, including electronic ballasts and inverters. These capacitors offer small size, good self-healing properties, and are coated with flame-retardant epoxy resin powder.
Product Attributes
- Brand: DGCXCAP
- Origin: Dongguan, China
- Material: Metallized Polyester Film (MPE)
- Certifications: RoHS, REACH, Halogen-free (optional)
Technical Specifications
| Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz, 20) | Dimensions (mm) (W1, H1, T1, P0.5, L Min d0.0) |
|---|---|---|---|---|---|
| MPE222J3AM040K200ZR | 0.0022 | 5 | 1000 | 1.0% | 6.2 x 7.2 x 3.9 x 5.0 x 20.0 x 0.5 |
General Electrical Characteristics
| Parameter | Specification | Test Conditions |
|---|---|---|
| Climate Category | 55/125/21 | |
| Operating Temperature Range | -55 to +125 | (Voltage derating of 1.25%/ from +85 to +125) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.01F10F | |
| Capacitance Tolerance | 5%(J), 10%(K), 20%(M) | |
| Rated Voltage (VDC) | 63, 100, 160, 250, 400, 630, 1000, 1250 | |
| Dissipation Factor (DF) | 0.01 | (1kHz, 20) |
| Insulation Resistance (U100VDC) | 3750M (for C0.33uF) 1250M*uF (for C>0.33uF) | (10VDC, 60 sec) |
| Insulation Resistance (U>100VDC) | 10000M (for C0.33uF) 3000M*uF (for C>0.33uF) | (100VDC, 60 sec) |
| Withstand Voltage | 1.75UR(VDC) | 5 seconds |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polyester Film | MPEAM/MPET | -/ - |
| 2 | Sprayed Layer | Zinc-tin alloy wire | -/ - |
| 3 | Leads | Tinned copper-clad steel wire | -/ - |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin |
Note: All raw materials and finished products comply with RoHS environmental requirements.
Packaging Information
| Item | Specification |
|---|---|
| Inner Carton Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Carton Dimensions (L*W*H) | 49*36*27 cm |
| Carton Contents | Manufacturer Part Number, Bag Count & Quantity per Bag, Lot No. |
| Packaging Method | Transparent PVC bag for moisture and dust protection. |
| Labeling | RoHS environmental mark, other customer-specific markings. |
Storage Conditions
| Condition | Specification |
|---|---|
| Temperature | Max 35 |
| Relative Humidity | Max 80% |
| Storage Time | Max 12 months (from production date marked on packaging) |
Environmental Characteristics
| Characteristic | Compliance |
|---|---|
| RoHS | Compliant |
| REACH | Compliant |
| Halogen-free | Compliant (if required) |
Electrical Characteristics and Test Conditions
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Load: 10N, Time: 10 sec. (Wire dia: 0.6&0.8mm) |
| Bending Strength | 5N force, 90 x 2 times. (Wire dia: 0.6&0.8mm) | ||
| 2 | Solderability | Solder coverage rate 95% | Flux temp: 2455, Immersion time: 2.50.5 sec. |
| 3 | Soldering Heat Resistance | Appearance | No visible damage. Solder temp: 2605, Immersion time: 101 sec. Recovery time: 1-2 hours. |
| DF Increase | 0.005 (C1.0F, 10kHz); 0.003 (C>1.0F, 1kHz) | ||
| Capacitance Change | C/C 2% | ||
| 4 | Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: 30 min. |
| Vibration | No visible damage. Amplitude 0.75mm or acceleration 98m/s, Freq: 10-500Hz. 3 directions, 2h each. | ||
| Shock | No visible damage. 4000 cycles, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement: Capacitance | (1KHz) | ||
| Final Measurement: DF | CR1F: 10kHz; CR>1F: 1kHz. DF Increase 0.003 (C1.0F, 10kHz); 0.002 (C>1.0F, 1kHz) | ||
| Final Measurement: Insulation Resistance | IR/IR 50% | ||
| 5 | Climatic Sequence | Appearance | No visible damage. Dry Heat: +105, 16h. Cyclic Damp Heat (DB) - 1st cycle. Cold: -40, 2h. Low Pressure: 8.5kPa, 1h. Cyclic Damp Heat (DB) - remaining cycles. |
| Final Measurement: Capacitance | C/C 5% | ||
| Final Measurement: DF | CR1F: 10kHz; CR>1F: 1kHz. DF Increase 0.005 (C1.0F, 10kHz); 0.003 (C>1.0F, 1kHz) | ||
| Final Measurement: Insulation Resistance | IR/IR 50% | ||
| 6 | Damp Heat (Steady State) | Appearance | No visible damage. RH: 90-95%RH, Temp: 402, Duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| 7 | Endurance | Appearance | No visible damage. Temp: 85, 1000 hours. Applied Voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| DF Increase | CR1F: 10kHz; CR>1F: 1kHz. DF Increase 0.003 (C1.0F, 10kHz); 0.002 (C>1.0F, 1kHz) | ||
| Insulation Resistance | IR/IR 50% | ||
| 8 | Characteristics Dependent on Temperature | Capacitance Measurement at points b, d, f | Static method. Lower category temp (-40): 0 (Cb-Cd)/Cd +3%. Upper category temp (105): -4.0% (Cf-Cd)/Cd 0. |
| 9 | Charge/Discharge | Capacitance Change | C/C 5% |
| DF Increase | CR1.0uF: 10KHz, 0.003. CR>1.0uF: 1KHz, 0.002. | ||
| Insulation Resistance | IR/IR 50% |
Usage Rules
| Category | Details |
|---|---|
| Usage Range | Do not exceed upper category temperature. Avoid overload. Do not exceed maximum pulse current. |
| Operation Precautions | Avoid repeated squeezing at lead root. Pay attention to lead tip. |
| Soldering | Confirm solder temperature within ranges: (1) Wave Soldering (MPE): TP 125 for 120 sec; Ts 160 for 45 sec. (2) Soldering Iron: Tip temp 350, time 3 sec. (3) Lead-type film capacitors are not suitable for reflow soldering. Ts: Max temperature of component body during wave soldering. Tp: Max temperature of component body in preheating zone. |
2512241555_DGCX-MPE222J3AM040K200ZR_C53224143.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
