<
>
Specifications
Mfr. Part #:
MPE155J2SD06HC0300R
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MPE155J2SD06HC0300R
Product Description
Product Overview
The CL21(H)/MPE series capacitors are epoxy-encapsulated metallized polyester film capacitors designed for DC filtering applications such as PFC and DC link in electronic equipment. They feature a non-inductive wound structure, small size, good self-healing properties, and are coated with flame-retardant epoxy resin powder. These capacitors are widely used in LED drivers, switching power supplies, electronic ballasts, and inverters.
Product Attributes
- Brand: DGCX ()
- Origin: Guangdong Province, Heyuan City, Longchuan County, Shenzhen Bao'an (Longchuan) Industrial Transfer Industrial Park C1 Plot
- Material: Metallized Polyester Film, Tin-plated Copper Clad Steel Leads, Flame-retardant Epoxy Resin Powder
- Certifications: RoHS, REACH, Halogen-free (if required)
Technical Specifications
| Product Code | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dielectric Loss (DF) (1KHz, %) | Dimensions (mm) W*H*T | Lead Pitch (mm) | Lead Type | Environmental Requirements |
|---|---|---|---|---|---|---|---|---|
| MPE155J2SD06HC0300R | 1.5 | 5% | 450 | 1.0 | 16.5*16.5*6.0 | 15.0 | P=15, L=3 | RoHS, REACH |
| Parameter | Specification | Test Method |
|---|---|---|
| Climate Category | 55/125/21 | |
| Operating Temperature Range | -55~+125 | (+85~+125: rated voltage derating 1.25% / ) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.01F10F | |
| Capacitance Tolerance | 5%(J), 10%(K), 20%(M) | |
| Rated Voltage | 250V, 400/450Vdc, 500/520Vdc, 630Vdc | |
| Dissipation Factor (DF) | 0.01 (1kHz, 20) | GB 7332, IEC60384-2 |
| Insulation Resistance | 10,000M for C0.33uF (100VDC, 60s) | |
| 5000M*uF for C>0.33uF (100VDC, 60s) | ||
| Withstand Voltage | 1.6UR(VDC), 5s | |
| Max Pulse Rise Rate (dV/dt) | See table in source | If actual working voltage (U) is lower than rated voltage (UR), dV/dt allowed value should be multiplied by UR/U |
| Terminal Strength (Tensile) | 10N, 10s | No visible mechanical damage |
| Terminal Strength (Bending) | 5N, 902 times | For 0.6 & 0.8mm wire diameter |
| Solderability | 95% tinning rate | Flux temp: 2455, Immersion time: 2.50.5s |
| Solder Heat Resistance | Appearance: No visible damage | Solder temp: 2605, Immersion time: 101s, Recovery time: 1~2h |
| DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) | ||
| Capacitance change C/C2% | ||
| Rapid Temperature Change | Appearance: No visible damage | A=-40, B=+105, 5 cycles, t=30min |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or acceleration 98m/s, 10-500Hz, 3 directions, 2h each, total 6h |
| Shock | Appearance: No visible damage | 4000 times, acceleration 390m/s, pulse duration: 6ms |
| Final Measurement (after Shock/Vibration) | Appearance: No visible damage | |
| Capacitance change C/C5% | ||
| DF increase 0.003 (C1.0F, 10kHz) / 0.002 (C>1.0F, 1kHz) | ||
| Insulation Resistance IR/IR50% | ||
| Sequential Humidity Test | Appearance: No visible damage | Dry Heat +105, 16h; Cyclic Damp Heat (Test Db, 1st cycle); Cold -40, 2h; Low Pressure 8.5kPa, 1h; Cyclic Damp Heat (Test Db, remaining cycles) |
| Capacitance change C/C5% | ||
| DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) | ||
| Insulation Resistance IR/IR50% | ||
| Steady State Damp Heat | Appearance: No visible damage | RH 90-95%, 402, 21 days, Recovery time: 1~2h |
| Capacitance change C/C5% | ||
| DF increase 0.005 | ||
| Insulation Resistance IR/IR50% | ||
| Endurance | Appearance: No visible damage | T=85, 1000h, Voltage: 1.25UR |
| Capacitance change C/C8% | ||
| DF increase 0.003 (C1.0F, 10kHz) / 0.002 (C>1.0F, 1kHz) | ||
| Insulation Resistance IR/IR50% | ||
| Characteristics Dependent on Temperature | See table in source | Static method, capacitor held sequentially at specified temperatures (-40, +20, +105) |
| Charge/Discharge | Capacitance change C/C5% | 10,000 cycles, Charge time: 0.5s, Discharge time: 0.5s, Charge voltage: UR, Charge resistance: 220/CR (), Discharge resistance: 10/CR or 20 (whichever is greater) |
| DF increase 0.003 (10KHz, CR1.0uF) / 0.002 (1KHz, CR>1.0uF) | ||
| Insulation Resistance IR/IR50% |
2512031620_DGCX-MPE155J2SD06HC0300R_C53070634.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
