<
>
Specifications
Current - Saturation (Isat):
2.35A
Mfr. Part #:
PNLS4020-4R7M 4.7UH
Package:
SMD,4x4mm
Key Attributes
Model Number:
PNLS4020-4R7M 4.7UH
Product Description
Product Overview
The PNLS series chip power inductors from Dongguan Zhenbaojia Electronics Co., Ltd. are designed for high-performance applications. They feature a closed magnetic circuit for reduced EMI, metallization on the ferrite core for enhanced durability, and low DCR for minimal power loss. These inductors are widely used in smart devices, computing, gaming, and multimedia equipment.
Product Attributes
- Brand: PNLS Series
- Manufacturer: Dongguan Zhenbaojia Electronics Co., Ltd.
- Origin: China
- Type: Wire Wound Chip Inductor
Technical Specifications
| Product Type | External Dimensions (LW) (mm) | Nominal Inductance | Inductance Tolerance | Fig. | A | B | C (max) | D (max) | E (max) |
| PNLS252010 | 2.01.6 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.1 | 2.50.3 | 2.00.35 | 1.05 | 2.1 | 0.85 |
| PNLS252012 | 2.01.6 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.1 | 2.50.3 | 2.00.35 | 1.25 | 2.0 | 0.85 |
| PNLS3010 | 3.03.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.1 | 3.00.3 | 3.00.35 | 1.20 | 2.5 | 0.85 |
| PNLS3012 | 3.03.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 3.00.3 | 3.00.35 | 1.30 | 2.8 | 0.90 |
| PNLS3015 | 3.03.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 3.00.3 | 3.00.35 | 1.50 | 2.6 | 0.90 |
| PNLS4010 | 4.04.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 4.00.3 | 4.00.35 | 1.15 | 3.5 | 1.30 |
| PNLS4012 | 4.04.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 4.00.3 | 4.00.35 | 1.35 | 3.5 | 1.30 |
| PNLS4018 | 4.04.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 4.00.3 | 4.00.35 | 1.80 | 3.5 | 1.30 |
| PNLS4020 | 4.04.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 4.00.3 | 4.00.35 | 2.10 | 3.5 | 1.30 |
| PNLS4026 | 4.04.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 4.00.3 | 4.00.35 | 2.80 | 3.5 | 1.30 |
| PNLS4030 | 4.04.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 4.00.3 | 4.00.35 | 3.00 | 3.5 | 1.30 |
| PNLS5012 | 5.05.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 5.00.3 | 5.00.35 | 1.30 | 4.0 | 1.50 |
| PNLS5020 | 5.05.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 5.00.3 | 5.00.35 | 2.00 | 4.0 | 1.50 |
| PNLS5040 | 5.05.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 5.00.3 | 5.00.35 | 4.00 | 4.0 | 1.50 |
| PNLS5045 | 5.05.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 5.00.3 | 5.00.35 | 4.50 | 4.0 | 1.50 |
| PNLS6012 | 6.06.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.3 | 6.00.3 | 6.00.35 | 1.30 | 5.0 | 1.65 |
| PNLS6020 | 6.06.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.2 | 6.00.3 | 6.00.35 | 2.00 | 5.0 | 1.65 |
| PNLS6030 | 6.06.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.3 | 6.00.3 | 6.00.35 | 3.00 | 5.0 | 1.85 |
| PNLS6045 | 6.06.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.3 | 6.00.3 | 6.00.35 | 4.50 | 5.0 | 1.65 |
| PNLS6050 | 6.06.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.3 | 6.00.3 | 6.00.35 | 5.30 | 5.0 | 1.65 |
| PNLS6060 | 6.06.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.3 | 6.00.3 | 6.00.35 | 6.30 | 5.0 | 1.65 |
| PNLS8040 | 8.08.0 | R10, 1R0, 100 | K(10%), M(20%), N(30%) | Fig.3 | 8.00.3 | 8.00.35 | 4.20 | 6.3 | 2.45 |
Specifications Summary
| Parameter | Condition | Value |
| Operating Temperature Range | -40~+85 | |
| Storage Temperature Range | -10 ~+ 40, 70% RH | |
| Test Conditions (Standard) | Ambient Temperature | 2015 |
| Test Conditions (Standard) | Relative Humidity | 6520% |
| Test Conditions (Standard) | Air Pressure | 86 kPa to 106 kPa |
| DC Resistance (RDC) | Refer to Appendix A | Refer to Appendix A |
| Inductance (|Z|) | Refer to Appendix A | Refer to Appendix A |
| Quality Factor (Q) | Refer to Appendix A | Refer to Appendix A |
| Rated Current (Ir) | L/L100%30% | Refer to Appendix A |
| Solderability | Solder Temp.: 2405 , Immersion time: 31 sec | 95% min. coverage of all metallized area |
| Resistance to Solder Heat | Solder Temp.: 2653 , Immersion time: 61 sec | No visible damage. Electrical and mechanical characteristics shall be satisfied. |
| Bend | Substrate bend 2mm, hold 10s | No deformation. Inductance within 20%, DC resistance shall be satisfied. |
| Vibration | 10~55~10 Hz, 1.5mm amplitude, 2 hrs/axis | Appearance: no mechanical damage. Inductance within 20%. |
| Temperature Shock | -40 , +85 (30 min each), 5 cycles | Appearance: no mechanical damage. Inductance within 20%. |
| Humidity Resistance | 90 to 95% RH, 602 , Rated current, 1000 hrs | Appearance: no mechanical damage. Inductance within 20%. |
| High Temperature Resistance | +85 2, Rated current, 1000 hrs | Appearance: no mechanical damage. Inductance within 20%. |
| Low Temperature Storage | -40 2 , 1000 hrs | Appearance: no mechanical damage. Inductance within 20%. |
| Terminal Strength | 10N thrust (2N for 0603[0201]), 10 sec | No deformation. Inductance within 20%, DC resistance shall be satisfied. |
| Drop | Height: 100cm, 3 directions, 3 times each | No failure after test. |
| Salt Mist | Concentration: (50.1)%, PH: 6.5-7.2, 482h | Appearance: no mechanical damage. Inductance within 20%. |
2204211700_DMBJ-PNLS4020-4R7M-4-7UH_C2997617.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
