<
>
Specifications
Mfr. Part #:
MPP154J2GB040C050ZR
Package:
Through Hole,P=7.5mm
Key Attributes
Model Number:
MPP154J2GB040C050ZR
Product Description
Product Overview
The CBB22/MPP series capacitors are metallized polypropylene film, non-inductive wound capacitors designed for electronic equipment. They feature a flame-retardant epoxy powder coating and are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. These capacitors offer excellent self-healing properties, low loss, and low internal temperature rise.
Product Attributes
- Brand: CBB22/MPP
- Origin: Heyuan Factory, Guangdong Province
- Material: Metallized Polypropylene Film
- Encapsulation: Flame-retardant Epoxy Resin Powder Coating
- Lead Material: Tinned Copper Clad Steel Wire
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
Technical Specifications
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (V.dc) | Dielectric Loss (DF) (1KHz) | Dimensions (mm) (L*W*H*P) | Lead Pitch (mm) | Thickness Code | Environmental Code |
|---|---|---|---|---|---|---|---|---|
| MPP154J2GB040C050ZR | 0.33 | 5 | 400 | 0.1 | 8.7*7.1*4.1*7.5 | 7.5 | 04 | 050ZR |
Electrical Characteristics
| Parameter | Specification | Test Conditions |
|---|---|---|
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 ~ +105 | (+85 ~ +105: Rated voltage derating 1.25% / ) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F ~ 6.8F | |
| Capacitance Tolerance | 5% (J), 10% (K) | |
| Rated Voltage | 100Vdc/160Vdc, 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1250Vdc, 1600 Vdc, 2000 Vdc | |
| Dissipation Factor (DF) | 0.0010 | (1kHz, 20) |
| Insulation Resistance | 30,000M for C0.33uF | (100VDC, 60 seconds) |
| Insulation Resistance | 10000M*uF for C>0.33uF | (100VDC, 60 seconds) |
| Withstand Voltage | 1.6 UR(VDC) | 5 seconds |
| Max. Pulse Rise Time (dV/dt) | Refer to table | (UR(VDC) vs P=7.5, 10.0, 15.0, 22.5, 27.5) |
| Terminal Strength (Tensile) | No visible mechanical damage | Wire dia: 0.6&0.8mm, Load: 10N, Time: 10 sec |
| Terminal Strength (Bending) | No visible mechanical damage | Wire dia: 0.6&0.8mm, Force: 5N, 902 times |
| Solderability | 95% tinning rate on leads | Flux temp: 2455, Immersion time: 2.50.5 sec |
| Solder Heat Resistance | Appearance: No visible damage | Solder temp: 2605, Immersion time: 101 sec. Recovery time: 1-2 hours |
| Solder Heat Resistance | DF increase 0.004 (C1.0F, 10kHz) / 0.004 (C>1.0F, 1kHz) | |
| Solder Heat Resistance | Capacitance change C/C3% | |
| Rapid Temperature Change | Appearance: No visible damage | A=-40, B=+105, 5 cycles, Duration: 30 min |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or Accel. 98m/s (whichever is less), Freq: 10-500Hz, 3 directions, 2h each, total 6h |
| Shock | Appearance: No visible damage | 4000 times, Accel. 390m/s, Pulse duration: 6ms |
| Endurance (Steady State Damp Heat) | Appearance: No visible damage | RH: 90-95%RH, Temp: 402, Duration: 21 days. Recovery time: 1-2 hours |
| Endurance (Steady State Damp Heat) | Capacitance change C/C5% | |
| Endurance (Steady State Damp Heat) | DF increase 0.002 (C1.0F, 10kHz) / 0.004 (C>1.0F, 1kHz) | |
| Endurance (Steady State Damp Heat) | Insulation Resistance IR/IR50% | |
| Endurance (Accelerated) | Appearance: No visible damage | T=85, 1000 hours, Applied Voltage: 1.25UR |
| Endurance (Accelerated) | Capacitance change C/C8% | |
| Endurance (Accelerated) | DF increase 0.004 | |
| Endurance (Accelerated) | Insulation Resistance IR/IR50% | |
| Characteristics Dependent on Temperature | 0(Cb-Cd)/Cd+3% at -40 | Static method, capacitor held at specified temperatures (a:202, b:-403, d:202, f:1052, g:202) |
| Characteristics Dependent on Temperature | -4.0%(Cf-Cd)/Cd0 at 105 | |
| Charge/Discharge | Capacitance change C/C5% | Charge/Discharge cycles: 10,000. Charging time: 0.5 sec. Discharging time: 0.5 sec. Charging voltage: UR. Charging resistance: 220/CR (). Discharging resistance: 10/CR or 20 (whichever is greater). CR: Rated capacitance (uF). |
| Charge/Discharge | DF increase 0.005 (10KHz, CR1.0uF) / 0.005 (1KHz, CR>1.0uF) | |
| Charge/Discharge | Insulation Resistance IR/IR50% |
Usage Rules
- Operating Range: Do not exceed upper category temperature; avoid overload; do not exceed maximum pulse current.
- Handling Precautions: Avoid repeated squeezing at the wire root; be mindful of lead tip.
- Soldering:
- Wave Soldering: TP110 for 120 sec; Ts120 for 45 sec. For P7.5mm, T4mm, wave soldering time < 4 sec.
- Soldering Iron: Tip temperature not exceeding 350, time not exceeding 3 seconds.
- Not suitable for reflow soldering.
- Definitions: Ts: Maximum temperature of the component body during wave soldering. Tp: Maximum temperature the component body can withstand during the preheating stage.
Maximum Effective Voltage vs. Frequency Curve
Note: Typical values in the curve are tested under sinusoidal voltage, ambient temperature 85, and internal capacitor temperature rise T=10.
Product Electrical Characteristic Diagrams
(Diagrams not provided in text)
2512031620_DGCX-MPP154J2GB040C050ZR_C53070571.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
