Product Overview
The CBB81/PPS series high-voltage metallized polypropylene film/foil capacitor (impregnated type) is designed for high-voltage and high-frequency pulse circuits. It features a metallized polypropylene film and aluminum foil composite with an internal series non-inductive structure. The capacitor is encapsulated with flame-retardant epoxy resin powder. Typical applications include deflection circuits in televisions and monitors (S-correction and horizontal retrace waveforms), electronic ballasts, energy-saving lamps, absorption circuits, and SCR rectifier circuits. Key advantages include low loss, low internal temperature rise, and high dv/dt and overcurrent capabilities.
Product Attributes
- Brand: CX ()
- Product Series: CBB81/PPS
- Type: High-voltage metallized polypropylene film/foil capacitor (impregnated type)
- Construction: Metallized film & metal foil composite, internal series non-inductive structure
- Encapsulation: Flame-retardant epoxy resin powder
- Lead Material: Tinned copper-clad steel wire
- Sprayed Layer: Zinc-tin alloy wire
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
- Origin: Dongguan, Guangdong Province, China
Technical Specifications
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (V.dc) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) L x W x T (max) | Pitch (P) (mm) | Lead Diameter (d) (mm) |
|---|---|---|---|---|---|---|---|
| CBB81/PPS 0.022uF5% 3000V.dc P20 | 0.022 | 5% | 3000 | 0.1 | 22.0 x 16.0 x 10.0 | 20.0 | 0.8 0.05 |
| PPS223J3FA100B200ZR | 0.022 | 5% (J) | 3000 (3F) | 0.1 | 22.0 x 16.0 x 10.0 | 20.0 | 0.8 0.05 |
| Specification | Technical Data |
|---|---|
| Climate Category | 40/105/21 |
| Operating Temperature Range | -40 to +105 (+85 to +105: Derating 1.5% per for R.V(dc)) |
| Capacitance Range | 0.00022F to 0.047F |
| Capacitance Tolerance | 3%(H); 5%(J); 10%(K) |
| Rated Voltage (V.dc) | 630V, 1000V, 1200/1250V, 1600V, 2000V |
| Dissipation Factor (DF) | 0.1% (1KHz), 0.2% (10KHz), at 20~25 |
| Insulation Resistance | 50000M for C0.33F; 15000MuF for C>0.33F (Measured at 100VDC10VDC/60s / 20~25) |
| Dielectric Strength (Terminal to Terminal) | 1.75 UR(VDC), 5 seconds |
| Maximum Pulse Rise Slope (dV/dt) | See table in source document for specific values based on UR and Pitch. |
| Lead Strength (Tensile) | 10N, 10 seconds (for 0.6 & 0.8mm wire diameter) |
| Lead Strength (Bending) | 5N, 90 2 times (for 0.6 & 0.8mm wire diameter) |
| Solderability | 95% tinning rate on leads (Soldering flux temp: 2455, Immersion time: 2.50.5s) |
| Soldering Heat Resistance | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002 (10kHz) (Soldering temp: 2605, Immersion time: 101s) |
| Rapid Change of Temperature Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002 |
| Vibration Test | Appearance: No visible damage (Amplitude 0.75mm or Acceleration 98m/s, Frequency 10-500Hz, 3 directions, 2h each) |
| Impact Test | Appearance: No visible damage (4000 times, Acceleration 390m/s, Pulse duration: 6ms) |
| Climate Sequence Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002; Insulation Resistance change: IR/IR50% |
| Damp Heat (Steady State) Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.002; Insulation Resistance change: IR/IR50% (90-95%RH, 402, 21 days) |
| Endurance Test | Appearance: No visible damage; Capacitance change: C/C8%; DF increase: 0.0015; Insulation Resistance change: IR/IR50% (85, 1000 hours, 1.25UR applied) |
| Charge/Discharge Test | Appearance: No visible damage; Capacitance change: C/C3%; DF increase: 0.003; Insulation Resistance change: IR/IR50% (10,000 cycles) |
| Storage Conditions | Temperature: Max 35, Relative Humidity: Max 80% (Original packaging), Max storage time: 12 months from production date. |
2512091725_DGCX-PPS223J3FA100B200ZR_C53133398.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
